• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.4
• /
• pp.391-396
• /
• 2015

When the temperature of a flange in a refrigerator is reduced to the dew point, condensation is generated on the flange. Generally, hot lines, having a temperature of $35^{\circ}C$, are located near the flange to increase its surface temperature above the dew point. Hot lines are installed in close contact with the flange in order to increase the heat transfer from the hot lines to the flange surface. Through this work, the effects of the hot line shape and installation conditions, including a gap between the hot line and flange, and the function of a spacer in the inner case of the refrigerator were investigated. Additionally, an optimal shape of the inner case for easy assembling is proposed considering the contact between the hot line and flange.

• Journal of Korean Neurosurgical Society
• /
• v.52 no.1
• /
• pp.27-31
• /
• 2012

Objective : Although hydroxyapatite (HA) spacer has been used for laminoplasty, there have been no reports on factors associated with fusion and on the effects of HA shape. Methods : During January 2004 and January 2010, 45 patients with compressive cervical myelopathy underwent midline-splitting open door laminoplasty with winged (33 cases) and wingless (12 cases) HAs by a single surgeon. Minimal and mean follow up times were 12 and 28.1 months, respectively. Japanese Orthopedic Association (JOA) score was used for clinical outcome measurement. Cervical X-rays were taken preoperatively, immediately post-operatively, and after 3, 6, and 12 months and computed tomography scans were performed preoperatively, immediately post-operatively and after 12 months. Cervical lordosis, canal dimension, fusion between lamina and HA, and affecting factors of fusion were analyzed. Results : All surgeries were performed on 142 levels, 99 in the winged and 43 in the wingless HA groups. JOA scores of the winged group changed from $10.4{\pm}2.94$ to $13.3{\pm}2.35$ and scores of the wingless group changed from $10.8{\pm}2.87$ to $13.8{\pm}3.05$. There was no significant difference on lordotic and canal dimensional change between two groups. Post-operative 12 month fusion rate between lamina and HA was significantly lower in the winged group (18.2 vs. 48.8% p=0.001). Multivariate analysis showed that ossification of the posterior longitudinal ligament, male gender, and wingless type HA were significantly associated with fusion. Conclusion : Clinical outcome was similar in patients receiving winged and wingless HA, but the wingless type was associated with a higher rate of fusion between HA and lamina at 12 months post-operatively.

• Mycobiology
• /
• v.46 no.2
• /
• pp.172-176
• /
• 2018

A new species belonging to the genus Alternaria was isolated from the necrotic leaf spots of Brassica rapa subsp. pekinensis in Yuseong district, Daejeon, Korea. It is an occasional isolate, not an etiological agent, which is morphologically similar to A. broccoli-italicae, but differs in conidial size and conidiophore shape. Phylogenetic analysis using the sequence datasets of the internal transcribed spacer (ITS) region of the rDNA, glyceraldehyde-3-phosphate dehydrogenase (gpd), and plasma membrane ATPase genes showed that it is distantly related to A. broccoli-italicae and closely related to Alternaria species in the section Pseudoalternaria, which belonged to a clade basal to the section Infectoriae. Morphologically, the species is unique because it produces solitary conidia or conidial chains (two units), unlike the four members in the section Pseudoalternaria that produce conidia as short branched chains. It exhibits weak pathogenicity in the host plant. This report includes the description and illustration of A. brassicifolii as a new species.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.9
• /
• pp.1504-1510
• /
• 2016

The aim of this study is to improve properties both glass transition temperature($T_g$) and coefficient of thermal expansion(CTE) using epoxy/micro-nano alumina composites with adding glycerol diglycidyl ether (GDE:1,2,3,5g). This paper deals with the effects of GDE addition for epoxy/micro alumina contents (40, 50, 60wt%)+surface modified nano alumina(1_phr) composites. 20 kinds specimen were prepared with containing micro, nano alumina and GDE as a micro composites(10, 20, 30, 40, 50, 60, 70wt%) or a nano/micro alumina composites(1phr/40, 50, 60wt%). Average particle size of nano and micro alumina used were 30nm and $1{\sim}2{\mu}m$, respectively. The micro alumina used were alpha phase with Heterogeneous and nano alumina were gamma phase particles of spherical shape. The glass transition temperature and coefficients of thermal expansion was evaluated by DSC and TMA. The glass transition temperature decreased and coefficients of thermal expansion become smaller with filled contents of epoxy/micro alumina composites. On the other hand, $T_g$ and CTE as GDE addition variation(1,2,3,5g) of epoxy/micro-nano alumina composites decreased and increased respectively.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.9
• /
• pp.1511-1517
• /
• 2016

The aim of this study is to improve of properties for electrical AC insulation breakdown strength using epoxy/micro-nano alumina composites with adding glycerol diglycidyl ether (GDE:1,3,5g). This paper deals with the effects of GDE addition for epoxy/micro alumina contents (40,50,60wt%)+surface modified nano alumina(1_phr) composites. 14 kinds specimen were prepared with containing epoxy resins, epoxy micro composites and epoxy nano-micro alumina mixture composites. Average particle size of nano and micro alumina used were 30nm and $1{\sim}2{\mu}m$, respectively. The micro alumina used were alpha phase with Heterogeneous and nano alumina were gamma phase particles of spherical shape. The electrical AC insulation breakdown strength was evaluated by sphere to sphere electrode system and raising velocity 1kV/s. The AC breakdown strength decreased insulation properties of multi-composites according to increasing micro alumina and GDE addition contents.

• International Journal of Aeronautical and Space Sciences
• /
• v.18 no.2
• /
• pp.215-221
• /
• 2017

An electromagnetic (EM) wave absorber reduces the possibility of radar detection by minimizing the radar cross section (RCS) of structures. In this study, a radar absorbing structure (RAS) was applied to the leading edge of a blended wing body aircraft to reduce RCS in X-band (8.2~12.4GHz) radar. The RAS was composed of a periodic pattern resistive sheet with conductive lossy material and glass-fiber/epoxy composite as a spacer. The applied RAS is a multifunctional composite structure which has both electromagnetic (EM) wave absorbing ability and load-bearing ability. A two dimensional unit absorber was designed first in a flat-plate shape, and then the fabricated leading edge structure incorporating the above RAS was investigated, using simulated and free-space measured reflection loss data from the flat-plate absorber. The leading edge was implemented on the aircraft, and its RCS was measured with respect to various azimuth angles in both polarizations (VV and HH). The RCS reduction effect of the RAS was evaluated in comparison with a leading edge of carbon fabric reinforced plastics (CFRP). The designed leading edge structure was examined through static structural analysis for various aircraft load cases to check structural integrity in terms of margin of safety. The mechanical and structural characteristics of CFRP, RAS and CFRP with RAM structures were also discussed in terms of their weight.

• The Plant Pathology Journal
• /
• v.24 no.1
• /
• pp.17-23
• /
• 2008

A total of 33 isolates of Colletotrichum species obtained from pepper, apple, and strawberry in 2001 and 2002 were identified based on mycological characteristics, responses to fungicides carbendazim and the mixture of carbendazim and diethofencarb, and nucleotide sequence analysis of internal transcribed spacer (ITS) regionMost of the Colletotrichum isolates from pepper could be identified as C. acutatum. The pepper isolates produced grey white mycelia that gradually changed to dark gray. The conidia were variable in size, and almost cylindrical in shape with at least one rounded end. They could grow on PDA amended with carbendazim or with the mixture of carbendazim and diethofencarb at $10{\mu}g/ml$, to which the isolates from apple and strawberry were very sensitive. A part of the ITS regions from the Colletotrichum isolates was amplified with the specific primers designed for C. acutatum (Ca1-1) or C. gloeosporioides (Cg1-3). A primer pair of Ca1-1 and a universal primer (ITS4) amplified a 496-bp DNA fragment from all of the pepper isolates examined and one apple isolate. Taken together, it is conclusive that the Colletotrichum isolates causing the typical lesion of anthracnose on pepper fruits are C. acutatum.

• Mycobiology
• /
• v.28 no.1
• /
• pp.11-16
• /
• 2000

The nucleotide sequences of the internal transcribed spacer (ITS) regions of the ribosomal DNA including the 5.8S ribosomal RNA gene (rDNA) have been determined for 11 species in order to analyze their intrageneric relationships. The total length of these sequences ranged from 530 nucleotides for Trichoderma reesei KCTC 1286 to 553 nucleotide for Trichoderma koningii IAM 12534. Generally speaking, the length of ITS1 region was about 30 nucleotides longer than that of the ITS2 region. Also, the sequences of 5.8S rDNA were more conserved in length and variation than those of ITS regions. Although the variable ITS sequences were often ambiguously aligned, the conserved sites were also found. Thus, a neighbor-joining tree was constructed using the full sequence data of the ITS regions and the 5.8S rDNA. The Trichoderma genus used to be grouped on the basis of the morphological features and especially the shape of phialides needs to be reexamined. The phylogenetic tree displayed the presence of monophylogeny in the species of Trichoderma. Therefore, it was difficult to distinguish the intrageneric relationships in the Trichoderma genus.

• Korean Journal of Plant Resources
• /
• v.27 no.6
• /
• pp.671-679
• /
• 2014

Molecular phylogenetic analyses of Korean Elaeagnus L. were conducted using seven species, one variety, one forma and four outgroups to evaluate their relationships and phylogeny. The sequences of internal transcribed spacer regions in nuclear ribosomal DNA were employed to construct phylogenetic relationships using maximum parsimony (MP) and Bayesian analysis. Molecular phylogenetic analysis revealed that Korean Elaeagnus was a polyphyly. E. umbellata var. coreana formed a subclade with E. umbellata. Additionally, the genetic difference between E. submacrophylla and E. macrophylla was very low. Moreover, E. submacrophylla formed a branch from E. macrophylla, indicating that E. submacrophylla can be regarded as a variety. However, several populations of this species were not clustered as a single clade; therefore, further study should be conducted using other molecular markers. Although E. glabra f. oxyphylla was distinct in morphological characters of leaf shape with E. glabra. But E. glabra f. oxyphylla was formed one clade by molecular phylogenetic with E. glabra. Additionally, this study clearly demonstrated that E. pungens occurs in Korea, although it was previously reported near South Korea in Japan and China. According to the results of ITS regions analyses, it showed a resolution and to verify the relationship between interspecies of Korean Elaeagnus.

• The Korean Journal of Mycology
• /
• v.48 no.3
• /
• pp.187-195
• /
• 2020

Two unreported fungal isolates, KNU-GW1901 and KNU-AP100C, were collected from soil sample in Gyeongsangbuk-do, Korea. Their cultural and morphological characteristics were examined after 4 weeks of incubation at 25℃ on potato dextrose agar (PDA), malt extract agar (MEA), and oatmeal agar (OA). The conidial shape of KNU-GW1901 was aseptate, hyaline, globose to ellipsoidal, oblong, and reniform to pyriform and 2.61-4.97×1.93-3.61 ㎛ in size, whereas no conidial structures were observed in KNU-AP100C. The internal transcribed spacer (ITS) regions, large subunit (LSU), and small subunit (SSU) sequences were used to determine the taxonomic positions of the strains using the maximum likelihood phylogenetic tree. The isolate KNU-GW1901 was closely clustered with Plenodomus sinensis MFLUCC 17-0767, and KNU-AP100C was closely matched with P. collinsoniae CBS 120227. Based on the findings of morphological, cultural, and phylogenetic analysis, the isolates KNU-GW1901 and KNU-AP100C were identical to the previously described P. sinensis and P. collinsoniae isolates, respectively, which are first reported in Korea.