• Nuclear Engineering and Technology
• /
• 제38권6호
• /
• pp.459-482
• /
• 2006

A geochemical approach to the long-term safety of waste disposal is discussed in connection with the significance of actinides, which shall deliver the major radioactivity inventory subsequent to the relatively short-term decay of fission products. Every power reactor generates transuranic (TRU) elements: plutonium and minor actinides (Np, Am, Cm), which consist chiefly of long-lived nuclides emitting alpha radiation. The amount of TRU actinides generated in a fuel life period is found to be relatively small (about 1 wt% or less in spent fuel) but their radioactivity persists many hundred thousands years. Geological confinement of waste containing TRU actinides demands, as a result, fundamental knowledge on the geochemical behavior of actinides in the repository environment for a long period of time. Appraisal of the scientific progress in this subject area is the main objective of the present paper. Following the introductory discussion on natural radioactivities, the nuclear fuel cycle is briefly brought up with reference to actinide generation and waste disposal. As the long-term disposal safety concerns inevitably with actinides, the significance of the aquatic actinide chemistry is summarized in two parts: the fundamental properties relevant to their aquatic behavior and the geochemical reactions in nanoscopic scale. The constrained space of writing allows discussion on some examples only, for which topics of the primary concern are selected, e.g. apparent solubility and colloid generation, colloid-facilitated migration, notable speciation of such processes, etc. Discussion is summed up to end with how to make a geochemical approach available for the long-term disposal safety of nuclear waste or for the performance assessment (PA) as known generally.

• Nuclear Engineering and Technology
• /
• 제18권2호
• /
• pp.71-77
• /
• 1986

원자로 노심을 축방향으로 일차원 해석을 하고, 가입경수로형원자로의 안전성 해석에 적용할 수 있는 중성자 동특성프로그램 BIK를 개발하였다. BIK프로그램내에서 공간변수에 대해서는 유한차분법이, 시간변수에 대해서는 $\theta$-시간적분법이 채택되었다. 또한 도플러 및 감속재 궤환과 제어봉구동 등을 자세히 묘사하는 모델들이 포함되었다 핵모델의 검증은 ANL검증문제를 통해 이루어졌고, 고리 1호기의 제어봉 인출사고시의 노심출력 변화를 계산하였다. 이상의 계산결과 BIK동특성프로그램이 노심의 중성자 속 변화를 일차원해석의 한계내에서 비교적 정착하게 묘사할 수 있으며, 가압경수로형 원자로의 안전성 해석에 유용하게 사용될 수 있다는 것이 증명되었다.

• Nuclear Engineering and Technology
• /
• 제27권3호
• /
• pp.327-335
• /
• 1995

원자로의 가동중지 중이나. 재장전시 중기 발생기의 세관검사 및 보수작업을 병행하면 원전의 운전정지보수기 간을 현저하게 단축할 수 있다. 이때 원자로가 설치되어 있는 수조의 냉가수가 중기발생기내로 유입되는 것을 막는 장비로써 노즐댐이 있다. 노즐댐의 설치는 고방사선환경과 제한된 공간에서 작업을 해야 하는 특수성 때문에 작업자들이 기피하는 현상을 보인다. 현재 쓰이고 있는 무거운 노즐댐은 노즐댐설치 및 제거작업에 장애가 되는 가장 큰 요인이다. 본 논문에서는 노즐댐의 재질선정과 구조설계를 병행하여 현재 쓰이고 있는 노즐댐보다 가벼우면서도 굽힘강성 대 무게비와 비 강도가 증가된 노즐댐을 설계하였으며, 탄소섬유강화 복합재료로 경량노즐댐을 제작 완료하였다.

• Nuclear Engineering and Technology
• /
• 제53권6호
• /
• pp.1769-1785
• /
• 2021

The Integral Pressurized Water Reactors (IPWRs) as the innovative advanced and generation-III + reactors are under study and developments in a lot of countries. This paper is aimed at the thermal hydraulic study of the hot and average fuel sub-channel in a Generation III + IPWR by loose external coupling to the neutronic simulation. The power produced in fuel pins is calculated by the neutronic simulation via MCNPX2.6 then fuel and coolant temperature changes along fuel sub-channels evaluated by computational fluid dynamic thermal hydraulic calculation through an iterative coupling. The relative power densities along the fuel pin in hot and average fuel sub-channel are calculated in sixteen equal divisions. The highest centerline temperature of the hottest and the average fuel pin are calculated as 633 K (359.85 ℃) and 596 K (322.85 ℃), respectively. The coolant enters the sub-channel with a temperature of 557.15 K (284 ℃) and leaves the hot sub-channel and the average sub-channel with a temperature of 596 K (322.85 ℃) and 579 K (305.85 ℃), respectively. It is shown that the spacer grids result in the enhancement of turbulence kinetic energy, convection heat transfer coefficient along the fuel sub-channels so that there is an increase in heat transfer coefficient about 40%. The local fuel pin temperature reduction in the place and downstream the space grids due to heat transfer coefficient enhancement is depicted via a graph through six iterations of neutronic and thermal hydraulic coupling calculations. Working in a low fuel temperature and keeping a significant gap below the melting point of fuel, make the IPWR as a safe type of generation -III + nuclear reactor.

• Nuclear Engineering and Technology
• /
• 제42권5호
• /
• pp.568-575
• /
• 2010

Flow Accelerated Corrosion is an active degradation mechanism of CANDU feeder. The tight bend downstream to Gray loc weld connection, close to reactor face, suffers significant wall thinning by FAC. Extensive in-service inspection of feeder wall thinning is very difficult because of the intense radiation field, complex geometry, and space restrictions. Development of a knowledge-based inspection program is important in order to guarantee that adequate wall thickness is maintained throughout the whole life of feeder. Research results and plant experiences are reviewed, and the plant inspection databases from Wolsong Units One to Four are analyzed in order to support developing such a knowledge-based inspection program. The initial thickness before wall thinning is highly non-uniform because of bending during manufacturing stage, and the thinning rate is non-uniform because of the mass transfer coefficient distributed non-uniformly depending on local hydraulics. It is obvious that the knowledge-based feeder inspection program should focus on both fastest thinning locations and thinnest locations. The feeder wall thinning rate is found to be correlated proportionately with QV of each channel. A statistical model is proposed to assess the remaining life of each feeder using the QV correlation and the measured thicknesses. W-1 feeder suffered significant thinning so that the shortest remaining life barely exceeded one year at the end of operation before replacement. W-2 feeder showed far slower thinning than W-1 feeder despite the faster coolant flow. It is believed that slower thinning in W-2 is because of higher chromium content in the carbon steel feeder material. The average Cr content of W-2 feeder is 0.051%, while that value is 0.02% for W-1 feeder. It is to be noted that FAC is reduced substantially even though the Cr content of W-2 feeder is still very low.

• 터널과지하공간
• /
• 제26권5호
• /
• pp.339-347
• /
• 2016

스웨덴 포쉬마크 (Forsmark)지역에서는 1988년부터 세계 최초의 동굴식 중저준위 방사성 폐기물 처분장(SFR1)이 운영되고 있다. 4개의 터널 및 1개의 사일로에 용량 $63,000m^3$의 처분공간이 확보되어 연간 $1,000m^3$의 폐기물을 처분할 수 있었지만, 스웨덴 내 12기 중 10기의 원자로의 수명이 연장되고, 나머지 2기의 원자로가 폐쇄되어 추가 폐기물 처분에 대한 요구가 발생하게 되었다. 따라서 6기의 수평터널을 추가로 건설하여 폐기물과 9개의 반응로 용기 처분을 위한 $108,000m^3$의 처분 공간을 확보할 계획으로 스웨덴 방사성폐기물 관리주식회사(SKB)는 SFR3으로의 확장을 위한 허가 신청서를 2014년 정부에 제출하였다. 본 연구에서는 SFR3의 추가 확장 계획에 대해 소개하고, SFR3의 계획 시에 고려된 지질학적, 암반공학 및 암반수리학적인 요소들을 소개하였다.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2007년도 동계학술발표대회 논문집
• /
• pp.305-309
• /
• 2007

FTL(Fuel Test Loop) is a facility that confirms performance of nuclear fuel at a similar irradiation condition with that of nuclear power plant. FTL construction work began on August, 2006 and ended on March, 2007. During Construction, ensuring the worker's safety was the top priority and installation of the FTL without hampering the integrity of the HANARO was the next one. The installation works were done successfully overcoming the difficulties such as on the limited space, on the radiation hazard inside the reactor pool, and finally on the shortening of the shut down period of the HANARO. The Commissioning of the FTL is to check the function and the performance of the equipment and the overall system as well. The FTL shall start operation with high burn up test fuels in early 2008 if the commissioning and licensing progress on schedule.

• Nuclear Engineering and Technology
• /
• 제19권4호
• /
• pp.317-324
• /
• 1987

본 논문은 가압 경수형 원자로의 제어봉 이탈사고와 같이 공간 의존적 과도특성 해석에 필히 요구되는 가상적 사고 분석을 위한 핵적 동특성 코드의 개발을 위한 것이다. 본 논문에서는 1.5군 중성자 화산 방정식에 의거한 수정형 Borresen 모형을 핵적 동특성 모델로 잡고 이를 공간의존적 과도특성해석에 응용할 수 있도록 수식화 하여 고리 1호기 초기 노심의 가상적인 제어봉 이탈 사고해석에 응용했다. 본 사고 해석에 채택한 수정형 Borresen 모형에 대한 계산 정밀도의 검증을 위해 출력 분포 및 제어봉가등 계산결과를 고리 1호기 초기 노심의 노물리 실험자료와 비교했고 공간의존적 사고해석에 있어서 중시되는 핵적 동특성 방정식의 계산 효율성을 검토했다. 그리고 이 결과를 토대로 수정형 Borresen 모형이 제어봉 이탈사고, 증기관 파탄사고 등과 같은 공간의존적 사고해석에 유용하게 이용될 수 있다는 것을 보였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.291-295
• /
• 2007

FTL(Fuel Test Loop) is a facility that confirms performance of nuclear fuel at a similar irradiation condition with that of nuclear power plant. FTL consists of In-Pile Test Section (IPS) and Out-Pile System (OPS). FTL construction work began on August, 2006 and ended on March, 2007. During Construction, ensuring the worker's safety was the top priority and installation of the FTL without hampering the integrity of the HANARO was the next one. Task Force Team was organized to do a construction systematically and the communication between members of the task force team was done through the CoP(community of Practice) notice board provided by the Institute. The installation works were done successfully overcoming the difficulties such as on the limited space, on the radiation hazard inside the reactor pool, and finally on the shortening of the shut down period of the HANARO. Without a sweet of the workers of the participating company of HEC(Hyundae Engineering Co, Ltd), HDEC(HyunDai Engineering & Construction Co. Ltd), equipment manufacturer, and the task force team, it is not possible to install the FTL facility within the planned shutdown period. The Commissioning of the FTL is on due to check the function and the performance of the equipment and the overall system as well. The FTL shall start operation with high burn up test fuels in early 2008 if the commissioning and licensing progress on schedule.