• Bulletin of the Korean Chemical Society
• /
• 제28권3호
• /
• pp.447-450
• /
• 2007

Trap effects on the formation of space-charge field (SCF) associated with the photorefractivity of nonlinear optical polymers were studied by the Monte Carlo simulation using modified Gaussian disorder model. The charge transport dynamics influenced by the presence of trap molecules controls the formation of SCF via the charge distribution. Temporal behavior of SCF formation and SCF dependence on the trap depth are discussed in terms of the concentration and distribution of charges (holes and ionized acceptors) developed following illumination of light. The correlation of the trap depth and the energetic disorder is presented for an optimal efficiency for the SCF formation.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1995년도 추계학술대회 논문집
• /
• pp.171-174
• /
• 1995

Space charge formation in epoxy loaded with silica and calcium carbonate has been studied. The epoxy itself showed almost no charge at up to 40 kV/mm. The addition of fillers such as SiO$_2$and CaCO$_3$resulted in homocharge formation, which was attributed to the interfacial trapping of injected charge at epoxy/filler interfaces. The amount of charge showed a maximum at 20-40 parts per hundred resin above which the charge decreased gradually. This was tentatively attributed to the enhanced interconection of charge transport path by an increased filler content

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.84-87
• /
• 2001

Space charge formation at high temperature was investigated in several polymers using pulsed electro-acoustic (PEA) method. In SXLPE, homocharge is found and increased as an increase of temperature. In a charge of polarity of poling voltage(positive to negative), space charge mainly cause of hole injection. In Ionomer, heterocharge is found because of ion. As an increase of temperature heterocharge is also increased. In PET, As an increase of temperature homocharge is decreased.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 추계학술대회 논문집 전기설비전문위원
• /
• pp.233-234
• /
• 2008

We observed internal space charge behavior for two types of epoxy composites under dc electric fields to investigate the influence of water at high temperature. In the case of glass/epoxy specimen, homocharge is observed at water-treated specimen, and spatial oscillations become clearer in the water-treated specimens. Electric field in the vicinity of the electrodes shows the injection of homocharge. In aramid/epoxy specimens, heterocharge is observed at water-treated specimens, i.e. negative charge accumulates near the anode, while positive charge accumulates near the cathode. Electric field is enhanced just before each electrode. In order to further examine the mechanism of space charge formation, we have developed a new system that allows in situ space charge observation during ion migration tests at high temperature and high humidity. Using this in situ system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.2307-2308
• /
• 2008

We observed internal space charge behavior for two types of epoxy composites under dc electric fields to investigate the influence of water at high temperature. In the case of glass/epoxy specimen, homocharge is observed at water-treated specimen, and spatial oscillations become clearer in the water-treated specimens. Electric field in the vicinity of the electrodes shows the injection of homocharge. In aramid/epoxy specimens, heterocharge is observed at water-treated specimens, i.e. negative charge accumulates near the anode, while positive charge accumulates near the cathode. Electric field is enhanced just before each electrode. In order to further examine the mechanism of space charge formation, we have developed a new system that allows in situ space charge observation during ion migration tests at high temperature and high humidity. Using this in situ system.

• Journal of Electrical Engineering and Technology
• /
• 제10권3호
• /
• pp.1124-1130
• /
• 2015

Moisture and high temperature are the most important factors that lead to the ageing of oil-paper insulation, but the research about space charge characteristics of oil-paper insulation does not take the combined effect of ambient temperature, moisture and thermal ageing into account. The pulsed electroacoustic (PEA) method was used to investigate the influence of moisture and temperature on space charge characteristics of oil paper at different ageing stages. The results showed that moisture could speed up formation of space charge in oil paper when water concentration was low, but the formation was restrained if the water concentration was high. At the beginning of thermal ageing, heterogeneous charge accumulation had predominance, but it gradually changed to homogeneous charge injection with ageing. It was believed that moisture concentration could speed up ageing and enhance charge accumulation on one hand, and accelerate or slow down the establishment speed of space charge on the other hand, therefore, charge accumulation type changed with ageing. The more seriously the oil-paper insulation was thermally aged, the deeper the trap energy level was, hence more space charge was trapped, which could be speeded up by increasing the ageing temperature, but the effect of ambient temperature did not fit the Arrhenius law.

• Journal of Electrical Engineering and Technology
• /
• 제9권2호
• /
• pp.635-642
• /
• 2014

The space charge behaviors of oil-paper insulation affect the stability and security of oil-filled converter transformers of traditional and new energies. This paper presents the results of the electrical aging of oil-impregnated paper under AC-DC combined voltages by the pulsed electro-acoustic technique. Data mining and feature extractions were performed on the influence of electrical aging on charge dynamics based on the experiment results in the first stage. Characteristic parameters such as total charge injection and apparent charge mobility were calculated. The influences of electrical aging on the trap energy distribution of an oil-paper insulation system were analyzed and discussed. Longer electrical aging time would increase the depth and energy density of charge trap, which decelerates the apparent charge mobility and increases the probability of hot electron formation. This mechanism would accelerate damage to the cellulose and the formation of discharge channels, enhance the acceleration of the electric field distortion, and shorten insulation lifetime under AC-DC combined voltages.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1995년도 춘계학술대회 논문집
• /
• pp.107-110
• /
• 1995

Space charge formation in epoxy/silica composites has been investigated by the pulsed electroacoustic (PEA) method. The addition of silica resulted in homocharge formation, which attributed to the interfacial trapping of injected charge at epoxy/silica interfaces, Homocharge accumulation with increase of voltage and silica content.

• 전력전자학회논문지
• /
• 제14권5호
• /
• pp.387-396
• /
• 2009

리튬전지는 생산과정에서의 핵심인 화성공정에 의해 수명 및 성능이 크게 좌우되며, 화성공정을 처리하기 위해서 충방전 시스템이 필수적으로 요구되고 있다. 리튬전지 충방전 시스템의 특성을 해석하기 위해 일반적인 방법으로 시뮬레이션하면 충전동작과 방전동작에 엄청난 시간이 소요되고 메모리 용량의 한계로 인해 범용 PC로는 시뮬레이션이 어렵다. 본 논문에서는 리튬전지를 저항-커패시터 직렬회로로 모델링하였으며 상태공간평균의 개념을 적용하여 리튬전지 충방전 시스템을 해석하고 시뮬레이션하였다. Simplorer를 사용하여 시뮬레이션을 수행한 결과 시뮬레이션 시간이 단축되어 범용 PC로도 3시간 내에 시뮬레이션이 가능해졌으며, 리튬전지 충방전 시스템의 정전류/정전압 충전 특성 및 정전류 방전 특성과 충방전 소요시간을 예측할 수 있었다. 또한 충방전 시스템을 구성하고 실험하여 리튬전지를 저항-커패시터 직렬회로로 등가화한 모델링의 타당성과 상태공간평균의 개념을 사용하여 해석하고 시뮬레이션한 방법의 유용성을 입증하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.264-265
• /
• 2008

While the reliability of bulk insulation has become important particularly in multilayer boards and embedded boards, electronics are to be used under various environments such as at high temperature and in high humidity. We observed internal space charge behavior for two types of epoxy composites under dc electric fields to investigate the influence of water at high temperature. In the case of glass/epoxy specimen, homocharge is observed at water-treated specimen, and spatial oscillations become clearer in the water-treated specimens. Electric field in the vicinity of the electrodes shows the injection of homocharge. In aramid/epoxy specimens, heterocharge is observed at water-treated specimens, i.e. negative charge accumulates near the anode, while positive charge accumulates near the cathode. Electric field is enhanced just before each electrode. In order to further examine the mechanism of space charge formation, we have developed a new system that allows in situ space charge observation during ion migration tests at high temperature and high humidity. Using this in situ system.