• Journal of the Korean earth science society
• /
• v.29 no.7
• /
• pp.579-585
• /
• 2008

The time-dependent evolution of disk mass for outburst limit cycle in a black hole microquasar is calculated based on the non-linear hydrodynamic model of thermally unstable accretion disk. The physical parameters such as black hole mass, disk size and mass transfer rate are adopted to reproduce the historical 1975 outburst observed in a prototype black hole X-ray nova A0620-00. The time-dependent effect of irradiation from the central hot region to the disk is considered in two ways: direct irradiation and indirect irradiation reflected from hot accretion flow above the disk. The accretion disk thermal instability model can account for the bolometric luminosity appropriate to typical characteristics of system luminosity observed in X-ray transients during the whole cycle of the outburst evolution. The maximum mass of the accretion disk, ${\sim}4.03{\times}10^{24}g$, is achieved at the ignition of an outburst, and the minimum value, ${\sim}8.54{\times}10^{23}g$, is reached during the cooling decay to quiescence. The disk mass varies ${\sim}5$ times during outburst limit cycle.

• Korean Journal of Construction Engineering and Management
• /
• v.19 no.4
• /
• pp.102-110
• /
• 2018

The study analyzed the effects of the floor plan characteristics on the apartment price under the national housing size in 3 Gangnam districts for decades, the primary apartment markets in Korea. The analysis showed that the storage spaces such as kitchen, warehouses and dressage rooms have a positive effect on the price. Especially, the highly opened space with three-side open plan and the one with the unified type of livingroom, diningroom and kitchen have shown the strong effect on the price. For the kitchen spaces, the I-shaped kitchen tends to be more expensive while a centered living room has a positive effect on the price. These findings have an academic significance as the direct effects of plan characteristics on price has been examined unlike prior research focused on the analysis of trend, basic statistics, and satisfaction level. It is noteworthy that these research finding has identified the productive implication for the future floor plan design and pricing and also be implemented in the purchasing decision making by buyers in the housing market.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.8
• /
• pp.950-957
• /
• 2012

In this paper, a small round-ended slot loaded by double ridges on the broad wall of a rectangular waveguide is presented as an element for a waveguide slot-array antenna(WSAA). By properly adjusting the ridge dimension, a resonance of the slot at a desired frequency can be achieved. The resonant length of the proposed slot is about $0.26{\lambda}_0$(free space wave length) at the resonance frequency. The proposed resonant slot has some advantageous properties, such as small size, small resonant conductance, and short and stable resonant slot length. In addition, the characteristics of the slots are slightly affected by the adjacent elements when the slots are arrayed for a waveguide slot antenna. A $4{\times}1$ WSAA with -20 dB side-lobe level(SLL) is designed, fabricated, and tested experimentally. The measured results are well agreed with the simulated ones and have an SLL of -15.9 dB and a half-power beam width of $110.2^{\circ}$ in the E-plane and $21.2^{\circ}$ in the H-plane, respectively, at 9.41 GHz.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.10 no.2
• /
• pp.148-154
• /
• 2005

As the exciting point of each phase is determined by the position of rotor, the rotor's accurate position-information is needed for the Switched Reluctance Motor(SRM). When using an absolute-encoder or a resolver, to detect the location of rotor the initial starting is possible, as early sensing of rotor's location is possible. However, this is not appropriate, considering the economical efficiency, and in case of using the incremental-encoder, there's a problem at initial starting as it is not easy to track down the location of rotor at the very beginning. When using Hall-ICs, there's a fault, as it needs a special ring magnet. Considering the initial starting and economical efficiency, the optical sensor technique using a slotted-disk and an opto-interrupter is appropriate, however, this method needs three opto-interrupters and a slotted-disk when using the 6/4 pole SRM. Nevertheless, in this paper, it used only two optical sensors to operate 6/4 pole SRM and made the start up and also forward and reverse operation possible. By excluding the slotted-disc md shortening a optical sensor, it improved the convenience and economical efficiency of the production. Also, as the space for slotted-disc is no more needed, it was able to reduce the size of motor.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.5 no.4
• /
• pp.1-9
• /
• 2002

This study is carried out to make the environmentally affinitive porous planting block for revegetation and to make a effective program for greening plans. The summary is shown below. 1. In order to get stronger intensity and distribute proper porosity in the block for planting, the cements mixed with fine soil were used and the finer in soil grains gives the stronger in intensity of the cements. Use of the furnace slag cements instead of the portland cements showed relatively stronger in intensity of the block. The intensity of the block became stronger when the mixed ratio of the cements to soil is 5 : 1, but the pore space ratio was lower. The percolate pH of the portland cements after one month of treatment was 13.1 but the percolate pH of the furnace slag cements was shown lower. To mold proper porous planting blocks, the proper combination of additives such as the dehydrating agent, elastic agent and adhesives into the mixture of cements and soil gives better effectives. 2. After molding the porous planting blocks, it gave a better result when the grains of the filler made of peat moss, upland soil and compound fertilizer were smaller than 2 mm in size. Shaking of the filling materials also gave the better result, but it took more time and cost much more. Therefore, it was better when the filling materials were mixed with water first then flew down for stuffing. 3. It was necessary to cover with soil after seeding or planting on the porous planting blocks. The proper thickness of the soil to help root development and keep moisture is about 3~5 cm. 4. The plants for planting on the porous planting block were required stronger in the growth condition of their roots and their environmental adaptability. The average germination percentage and rate of Platycodon grandiflorum on the porous planting block were 88.8% and 85% accordingly and their rate is very uniform. The germination rates of Dianthus superbus var. longicalycinus and Taraxacum officinale were more than 50%. These grass species, Chelidonium majus var. asiaticum, Lysimachia mauritiana and Scabiosa mansenensis were the suggested biennial grasses in the planting area where exchanging of the seedling or nursery plants was not necessary because their germination rates were 59.3, 45.6 and 40.3% accordingly. Viola kapsanensis, Chrysanthemum sp., Taraxacum sp. and Iris ensata var. spontanea are the grass species that could be used by seeding for greening. However, the germination rate of Solidago virga-aurea var. asiatica, Aster scaber and Lythrum anceps were lower than 10%. The coverage ratio of Ixeris stolonifera is more than 80% after 60 days seeding and the root length of most of species are more than 10 cm except Iris ensata var. spontanea and Platycodon grandiflorum because their root developed thicker than other species.

• Journal of the Korean association of regional geographers
• /
• v.3 no.1
• /
• pp.99-113
• /
• 1997

The purpose of this study is to find out about the cause and adaptation process of urban households going to rural areas for agricultural management(Kwihyang nongga) through the microscopic analysis of a case study. Research results are summarized in the followings. The cause of Kwihyang nongga before the 1980s was generally due to the social causes like the support of dependent family or rural-to-urban migrants' maladjustment in urban society. After the 1980s, however, it was related to the economic reasons such as the increase of households' income by commercial agriculture more than the social ones. Most of Kwihyang nongga was traditionally the households which came back to their native places, rural areas. Recently the urban households which did not originally come from rural areas are going to rural space because of the cultivation of high profit oriented agricultural products. Recent Kwihyang nongga increased the size of commercial agriculture through leased farmland, not by a purchase of agricultural land. Even though the number of Kwihyang nongga is now a few, it is expected that the influence of Kwihyang nongga on rural society will be various and high because it consists of young generation. The increase of Kwihyang nongga may be one of the ways to mitigate the decreasing rate of utilization of agricultural lands due to the labor shortage of rural areas after industrialization. To solve rural problems related to underpopulation, it is necessary to establish the active plicies of helping Kwihyang nongga. The actions for Kwihyang nongga ought to emphasize the improvement of educational conditions and living facilities as well as financial aids and the improvement of farming conditions.

• The Journal of Engineering Geology
• /
• v.16 no.4 s.50
• /
• pp.337-349
• /
• 2006

Seven hundred and fifty one fractures of the rhyolitic tuffaceous rock masses were mapped using 6 scanlines placed on rock slope exposures that were within 8.02 km of Busan-Ulsan highway. These data were analyzed to find the number of fracture sets that exist in the rock slopes and the probability distributions of orientation, spacing, trace length and fracture size in 3-D for each of the fracture sets. All the fracture set orientation distributions exhibit high variability. The Fisher distributions were found to be unsuitable to represent the statistical distribution of orientation for most of the fracture sets. The probability distributions, gamma, exponential and lognormal were found to be highly suitable to represent the distribution of spacing and semi-trace length of fracture sets. In obtain-ing these distributions, corrections were applied for sampling biases associated with spacing and trace length. The generated fracture system in 3-D was used to make predictions of fracture traces for each fracture set on 2-D win-dows. Developed stochastic 3-D fracture network for the rock mass was validated by comparing statistical proper-ties of the observed fracture traces on scanlines with the predicted fracture traces on the scanlines. This exercise fumed out to be successful.

• Proceedings of the KOSOMBE Conference
• /
• v.1996 no.05
• /
• pp.199-202
• /
• 1996

Artificial hearts are intended for use in patients with severe forms of heart disease for which no surgical repair is possible. The moving-actuator pump was developed to decrease the overall volume size of the electromechanical total artificial heart (TAH) by eliminating the occupied space of the fixed-actuator in the conventional pusher-plate type pump. In our pump, the actuator moves back and forth for alternative ejections of left and right ventricles. The problem of fitting the TAH to atrial remnants and arterial vessels could also be improved by circular or penduluous mot ion of the actuator instead of linear mot ion of the pusher-plate in the conventional pumps. We have evaluated two types of moving- actuator pump; one is a rolling cylinder type, and the other a pendulum type pump. In the rolling cylinder pump, frictional energy loss exists between the pump housing's guide bars and the actuator's end caps, while the bottom rack under the cylindrical actuator increases the height of the pump, the pump is therefor not implantable inside the small chest of human-sized animals with a body weight of less than 70kg. The new human type pump has a penduluous mot ion actuator to correct the above problems while maintaining the advantage of the moving- actuator's small total volume. The totally implantable TAH is composed of a blood pump, a control system and pheriperal equipments. The blood pump, which is constructed by a moving actuator, a right and left blood sac, and four artificial valves, is implanted in the thoracic. In 1988, the first implantation of the rolling cylinder TAH was performed into a female calf weighing 100kg, and the cal f recovered to the degree of voluntary standing and eat ing and survived to 100 hrs. We then survived two female sheep weighing about 63kg with the new human type TAH for three days.

• Journal of Information Management
• /
• v.40 no.3
• /
• pp.125-150
• /
• 2009

This study aims to investigate current situation and improvement method of correctional facility libraries in Korea. Thus this study made the following suggestions to improve the operation of correctional facility library and to facilitate its growth so that the inmates' basic right to know and access information could be guaranteed: First, there should institutional and legal grounds for the establishment and operation of correctional facility library such as standards, guidelines, and enactments; second, the government should provide enough budgets for human and material resources so that a prison library can equip itself with materials, facilities, and staff to run smoothly; third, the inmates' free access to the library service should be guaranteed in an open space; fourth, the library should introduce an automation system for lending, returning, and handling materials; fifth, a collaboration system with external resources should be set up to make effective use of lacking resources; sixth, programs should be researched and developed to analyze the size and composition of the inmates, the needs of the inmates, and available service; and finally, there should be staff with the qualification of a librarian to be responsible for the operation and management of a correctional facility library and to offer specialized library service to the inmates.

• The KIPS Transactions:PartA
• /
• v.14A no.3 s.107
• /
• pp.173-184
• /
• 2007

Garbage collection in the Java virtual machine is a core function that relieves application programmers of difficulties related to memory management. In this paper, we evaluate and analyze the performance of GenGC and GenRGC, garbage collectors for embedded Java virtual machines. For performance evaluation, we employ CVM, a real embedded Java virtual machine developed by Sun Microsystems, Inc., as a platform and also use a widely-used SpecJVM98 as a set of benchmark programs. To compare the performance of GenGC and GenRGC, we first evaluate the time of garbage collection and the delay time caused by garbage collection. Second, for more detailed performance analysis of GenRGC, we evaluate the time of garbage collection and the delay time caused by garbage collection while changing the sizes of a block and a frame. Third, we analyze the size of storage space required for performing GenRGC, and show GenRGC to be suitable for embedded environment with a limited mont of memory. Since CVM is the most representative one of embedded Java virtual machines, this performance study is quite meaningful in that we can predict the performance of garbage collectors in real application environments more accurately.