• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1997.04a
• /
• pp.169-175
• /
• 1997

Recently it is increased by degrees to produce complex and large lattice structures such as bridge, tower, crane, and space structures. In general, in order to analyse these structures we have used finite element method(FEM). In this method, however, it is necessary to use a large amount of computer memory and to take long computation time. For overcoming this problem, the Authors have developed the transfer dynamic stiffness coefficient method(TDSCM) which consists on the concept of the substructure synthesis method and transfer influence coefficient method. In this paper, the new free vibration analysis method for large type lattice structure is formulated by the TDSCM. And the results obtained by TDSCM are compared with those obtained by FEM, transfer matrix method and experiment. And it is confirmed for TDSCM to be the numerical high accuracy and high speed structure analysis method.

• Journal of the Korea Institute of Building Construction
• /
• v.20 no.4
• /
• pp.383-389
• /
• 2020

Accidents on construction sites involving fires do not occur as often as accidents involving falls from height or collapses. However, once a fire accident occurs, there is a high risk of a large number of casualties. Fire on construction sites is affected by working conditions and the types of activities the construction workers are engaged in at the sites. This study aims to identify activities and working conditions at construction sites that are vulnerable to fire, and analyse how they correlate with each other and how they affect the causes and consequences of fire accidents at construction sties. I analysed 40 fire accident reports and listed the situations vulnerable to fire at construction sites considering direct causes, activities, and working conditions. The most dangerous combination of fire hazards can be the heating devices used during rest/sleep in the office/cabin/storage during cold weather. The next most hazardous combination can be sparks arising from painting, waterproofing, insulation, plumbing, or welding/melting work in an underground or confined space.

• Proceedings of the IEEK Conference
• /
• summer
• /
• pp.97-102
• /
• 2004

The very complicated proplem in spatial processing is effects of phading (Multipath and Delay Spread) and co-channel interference (CCI). The phading is one of principal causes, that form inter-symbol interference (ISI). Spatial-Temproral Adaptive Filter (STAF) has been taken as a solution of this problem, because it can suppress both these types of interference. But the performance of STAF exposes some elemental limitations, in which are the slow convergence of adaptive process and computational complexity. The cause of this is that, STAF must treat a large quantity of information in both space and time. The way that master these limitation is a use of Subband Spatial-Temproral Adaptive Filter (SSTAF). SSTAF reduce computational complexity by pruning off samples of signal and thus it lost some information in time. This draw on attennation of output SINR of SSTAF. The article analyse a optimal solution of this problem by introducing SSTAF with nonuniform weighted distribution.

• Structural Engineering and Mechanics
• /
• v.4 no.6
• /
• pp.613-630
• /
• 1996

The homogenization method is used to develop a beam element in space for thermo-mechanical analysis of unidirectional composites. Local stress and temperature field in the microscale are described using the function of homogenization. The global (macroscopic) behaviour of the structure is supposed to be that of a beam. Beam-type kinematical hypotheses (including independent shear rotations) are hence applied and superposed on the microdescription. A macroscopic stiffness matrix for such a beam element is then developed which contains the microscale properties of the single cell of periodicity. The presented model enables us to analyse without too much computational effort complicated composite structures such as e.g. toroidal coils of a fusion reactor. We need only a FE mesh sufficiently fine for a correct description of the local geometry of a single cell and a few of the newly developed elements for the description of the global behaviour. An unsmearing procedure gives the stress and temperature field in the different materials of a single cell.

• Journal of the Korea Society of Computer and Information
• /
• v.22 no.11
• /
• pp.1-7
• /
• 2017

In this paper, we introduce three monitoring filtering techniques which reduce the overheads of dynamic data race detection. It is well known that detecting data races dynamically in multi-threaded programs is quite hard and troublesome task, because the dynamic detection techniques need to monitor all execution of a multi-threaded program and to analyse every conflicting memory and thread operations in the program. Thus, the main drawback of the dynamic analysis for detecting data races is the heavy additional time and space overheads for running the program. For the practicality, we also empirically compare the efficiency of three monitoring filtering techniques. The results using OpenMP benchmarks show that the filtering techniques are practical for dynamic data race detection, since they reduce the average runtime overhead to under 10% of that of the pure detection.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.1 no.2
• /
• pp.173-181
• /
• 1989

Until recently there was a lack of reliable performance data for the design and operation of Ondol heating systems. This paper presents a calculation method on heat flux from Ondol floor surface. Total heat flux from floor consists of radiation and convection component. In order to analyse the characteristics of both radiation and convection heat flux, each surface temperature is measured and several temperatures near each wall are measured vertically and horizontally in a practical Ondol heating space. Radiation heat flux is calculated and analysed by Gebhart's Absorption Factor Method with the consideration of instantaneous radiant exchanges. Convection heat output is derived from the vertical temperature profiles near floor. The vertical temperature profiles could be expressed by nonlinear regression equation models and convection coefficients could be estimated by the equations. As a result, radiation, convection and total heat flux are suggested by the expression of difference between floor surface and room air temperature.

• Journal of Families and Better Life
• /
• v.10 no.2
• /
• pp.87-97
• /
• 1992

The resulting rapid urbanization in Korea in several decades caused the problem of housing shortage and the various residential stressors. In spite of the seriousness of the problem. there have been very few studies that analyses systematically the effects of residential stressors on the housing adjustment attitudes and housing management behavior. The purpose of this study is to analyse such effects by identifying, on the basis of a comprehensive theoretical model. For this purpose, 822 housewives were sampled form the household in Seoul and Chonju-City. The main results obtained are as follows. 1) Higher tendency to housing adaptation tan housing adjustment attitudes. The lower level of stress is observed in housing adjustment than housing adaptation. 2) The higher level of housing management behavior is observed in the loser level of residential stress, the smaller level of living space, the higher level of family adaptation ability and social support.

• Journal of Families and Better Life
• /
• v.20 no.1
• /
• pp.139-149
• /
• 2002

The aim of this study is to examine the consumer information behavior and consumer satisfaction in virtual community, and analyse influential variables on these. The data for this study were collected from members of virtual community for cosmetics in DAUM ( www.daum.net) through self-report questionnaires. Main findings are following; Virtual community consumer experiences satisfaction for products including information, and information behavior. And the greater information behaviors are associated with the greater satisfaction. And the virtual community consumers' information behavior and satisfaction don't differ largely by internet variables and socio-demographic variables. On the other hand, virtual community consumers' information behavior and satisfaction are associated with psychological variables like community membership, information wants, enduring involvements. In conclusion, these satisfactions make the effect of ‘feedback’ to information behavior, so these virtual community is able to be activated. And this also means that virtual community is Ideal space for consumer to expand information behavior.

• Journal of Ocean Engineering and Technology
• /
• v.13 no.1 s.31
• /
• pp.51-61
• /
• 1999

When a structure is built on the ground under consolidation, the instant corresponding contact pressure which the upper structure exerts on the ground is established. But, as the consolidation of the ground proceeds, the contact pressure is changed because of the flexural rigidity of the upper structure. This varied contact pressure exerts influence on the consolidation behavior of the ground. And, this varied consolidation behavior exerts on the contact pressure in retum. This kind of interaction between the upper struture and the olwer ground under consolidation contimues till all the consolidation process in finished. So this problem cannot be defined as a linear problem. In this paper an approximation method which can analyse this non-linear interaction problem is proposed by the FEM.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 1997.11a
• /
• pp.345-352
• /
• 1997

We could analyse the fire behavior using the developed software for fire safety assessment in a large space such as atrium. But Korean building law hasn't admitted the result of fire risk assessment in atrium. In the legislation fire resistant wall or shutter must be required between atrium and office rooms, That has obstructed development of building design and fire protection technique in Korea. From this point of view, we made scenarios of fire spread between atrium and office rooms, and then computed fire spread and fire phenomena using FASTLite and Breakl. In this study, we can decide that fire compartmentalization between atrium and office rooms doesn't require in Atrium building if the material and fire protection system were reliable. Consequently, Korean Fire Protection Regulations have to consider in direction of increasing freedom of building.