• Analytical Science and Technology
• /
• v.8 no.3
• /
• pp.237-248
• /
• 1995

The simultaneous analysis of 16 organic pesticides, which are listed as a part of 129 priority pollutants by EPA(Environmental Protection Agency), was performed by GC-ECD(electron capture detector) and GC/MS-SIM(selected ion monitoring). Two extraction procedures from SW-846, sonication extraction and Soxhlet extraction, were somewhat modified and compared as an extraction and concentration method for the analysis of priority pollutants in soil. Accuracy and precision of the methods were reported from the calculation of mean recovery, mean relative standard deviation, and method detection limit.

• The Korean Journal of Food & Health Convergence
• /
• v.5 no.5
• /
• pp.11-25
• /
• 2019

Extraction of oil from Moringa oleifera seed using Response Surface Methodology (RSM) was investigated. Effects of three factors namely: sample mass, particle size and extraction time on the response, Moringa oleifera a volume extracted, were determined. The Box-Behnken design of RSM was employed which resulted in 15 experimental runs. Extraction was carried out in a 250 ml Soxhlet extractor with Hexane and Ethanol as solvent. The Moringa oleifera seed powder was packed inside a muslin cloth placed in a thimble of the Soxhlet extractor. The extraction was carried out at 60℃ using thermostatic heating mantle. The solvent in the extracted oil was evaporated and the resulting oil further dried to constant weight in the oven. This study demonstrates that Moringa oleifera oil can be extracted from its seed using ethanol and acetone as extraction solvent. The optimum process variables for both solvent (ethanol and acetone) was determined at sample weight of 40 g, particle size of 325 ㎛ and extraction time of 8 hours. It can be deduced that using acetone as solvent produces a higher yield of oil at the same optimum variable conditions compared to when ethanol was used.

• Korean Chemical Engineering Research
• /
• v.53 no.6
• /
• pp.717-722
• /
• 2015

D-limonene included in citrus fruits is obtainable to extract essential oil as well as separate the oil ingredient. Soxhlet extraction, a type of SDE (Simultaneous steam Distillation and solvent Extraction), was used to extract limonene from tangerine peel. HPLC analysis was performed to quantify extracted d-limonene by using reversed-phase HPLC column. Results of HPLC analysis showed that the optimal extraction time was 2 hours in any solvent, and the extracted amounts of d-limonene in tangerine peel (per g tangerine peel) were 7.77 mg, 0.49 mg, and 0.28 mg in ethyl alcohol, n-hexane, and ether. Because yield was the highest in using ethyl alcohol as a solvent, polarity is stronger factor to effect on yield of extraction than boiling point.

• The Korean Journal of Food And Nutrition
• /
• v.22 no.3
• /
• pp.352-356
• /
• 2009

In this study, we evaluated black pepper seed and white pepper seed for the following compounds: piperine content was determined by HPLC, and volatile oil content was determined via the Soxhlet method in before/after heat-treated samples, and total volatile material contents were determined via the SDE(Linkens-Nikens type simultaneous steam distillation and extraction apparatus) method. As a result, differences were noted in the black and white pepper seeds according to the constituent components, growing district, and whether the species was indigenous to Indonesia or India. We concluded that the differences in taste were attributable to the differences in the volatile material contents in black and white peppers. We also assessed these three determination results, and found that they were directly correlated. The volatile oil contents were determined by the Soxhlet method, which was a rapid, simple, and accurate method. We concluded that this method should prove to be an effective determination method in the quality control of black and white peppers.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2002.05b
• /
• pp.459-460
• /
• 2002

현재 오염 토양의 복원기술은 여러 가지 문제점들을 안고 있어 보다 경제적이면서 신속하고 실용적인 오염물질 제거방법의 개발이 요구되고 있다. 이에 본 연구에서는 유류에 오염된 토양을 극초단파와 용매를 사용하여 복원하는 것에 관한 기초 조사를 위한 실험을 수행하였다. 그 결과 유류에 오염된 토양을 극초단파를 이용하여 정화를 할 경우 토양 입자의 크기도 고려를 하여야 할 것으로 사료된다. 그리고, soxhlet 추출법과 극초단파 추출법을 비교하였을 경우 soxhlet 추출법에 비하여 약 1/3 정도의 용매로 추출이 가능하며, 1분 내ㆍ외의 추출 시간으로 soxhlet 추출법에 의한 kerosene의 회수율과 유사하거나 또는 그 이상의 회수율을 얻을 수 있는 것으로 조사되었다.

• Journal of the Korean Chemical Society
• /
• v.38 no.6
• /
• pp.418-426
• /
• 1994

This study was aimed at the detection of 40 semi-volatile organic base/neutral compounds from soil among 129 priority pollutants listed by EPA. Two extraction procedures, sonication extraction and Soxhlet extraction, were studied as a extraction and concentration method for priority pollutants in soil. Extracts were analyted by GC/MS-SIM(selected ion monitoring). The analytical methods were tested by standard compounds spiked into blank soil. Accuracy and precision of the methods were measured by calculation of mean recovery and mean relative standard deviation. And the method detection limits were estimated.

• Journal of the Korean Chemical Society
• /
• v.38 no.3
• /
• pp.246-253
• /
• 1994

The simultaneous analysis of 11 semi-volatile organic acid compound which are listed as priority pollutants by EPA, were performed by GC/MS-SIM(selected ion monitoring). Two extraction procedures, sonication extraction and Soxhlet extraction, were studied as an extraction and concentration method for priority pollutants in soil. Accurecy and precision of the methods were measured by the calculation of mean recovery, mean relative standard deviation, and method detection limit. Finally, limitations and prospects were discussed.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.6 no.6
• /
• pp.433-437
• /
• 2001

The extraction of panaxynol and panaxydol from Korean ginseng was found to be op-timal at 55$^{\circ}C$ for the shaking method, 80$^{\circ}C$ for the soxhlet method, and 65$^{\circ}C$ for the supercritical extraction method. The amount of extracted panaxydol and panaxynol, and their increased over a period of 12 h with the shaking method. The soxhlet method produced an extract with the largest panaxydol/panaxynol ratio. A reduced particle size enhanced extraction, however the ration of panaxydol/panaxynol decreased. Swelling in water was found to be detrimental for the extrac-tion of panaxydol and panaxynol.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2001.05a
• /
• pp.221-222
• /
• 2001

Phenol에 오염된 토양으로부터 토양을 복원하기 위하여 soxhlet 추출법과 microwave 에너지 추출법을 비교하였다. 그 결과 phenol에 오염된 토양으로부터 soxhlet 추출법으로 phenol을 회수하고자 할 때는 오염된 지 36 시간 전후에 메탄올과 물을 일정 비율 혼합하여 추출하는 것이 최고의 회수율을 가지는 것으로 관찰되었으며 그 회수율은 약 75 %에 이른다. 그리고 microwave 에너지 추출법을 사용할 경우 phenol에 오염된 지 36 시간 전후로 추출 용매는 acetone을 사용하여 추출 시간 60 초 동안 microwave 에너지를 주사하여 추출하는 것이 제일 좋은 회수율을 가지는 것으로 확인되었고 그 회수율은 약 85%였다. 따라서 오염 토양으로부터 오염 물질 제거시 soxhlet 추출법보다는 microwave 에너지 추출 방법이 보다 경제적이며 우수한 추출 효율을 나타냄을 확인하였다.

• Elastomers and Composites
• /
• v.54 no.3
• /
• pp.188-200
• /
• 2019

Rubber articles contain various organic additives such as antidegradants, curing agents, and processing aids. It is important to extract and analyze these organic additives. In this paper, various extraction methods of organic additives present in rubber composites were introduced (solvent extraction, Soxhlet extraction, headspace extraction, and solid-phase microextraction), and the extracts were characterized using gas chromatography/mass spectrometry (GC/MS). Solvent and Soxhlet extractions are easy-to-perform and commonly used methods. Efficiency of solvent extraction varies according to the type of solvent used and the extraction conditions. Soxhlet extraction requires a large volume of solvent. Headspace sampling is suitable for extracting volatile organic compounds, while solid-phase extraction is suitable for extracting specific chemicals. GC/MS is generally used for characterizing the extract of a rubber composite because most components of the extract are volatile and have low molecular weights. Identification methods of chemical structures of the components separated by GC column were also introduced.