• 센서학회지
• /
• 제29권5호
• /
• pp.303-311
• /
• 2020

Nondispersive infrared CO₂ gas sensor was developed after the simulation of optical cavity structure and assembling the optical components: IR source, concave reflectors, Fresnel lens, a hollow disk, and IR detectors. By placing a hollow disk in front of reference IR detector, the output voltages are almost constant value, near to 70.2 mV. The absorbance of IR light, F_a, shows the second order of polynomial according to ambient temperatures at 1,500 ppm. The differential output voltages and the absorbance of IR light give a higher accuracy in estimations of CO₂ concentrations with less than ± 1.5 % errors. After implementing the parameters that are dependent upon the ambient temperatures in microcontroller unit (MCU), the measured CO₂ concentrations show high accuracies (less than ± 1.0 %) from 281 K to 308 K and the time constant of developed sensor is about 58 sec at 301 K. Even though the estimation errors are relatively high at low concentration, the developed sensor is competitive to the commercial product with a high accuracy and the stability.

• 한국대기환경학회지
• /
• 제24권6호
• /
• pp.693-703
• /
• 2008

The important source of the mercury in water-column is the influx of atmosphere mercury, via dry and wet deposition. In this study, wet deposition of mercury was estimated to be $14.56{\mu}g/m^2$ during 15 months at the Lake Soyang, which is a little higher than those observed in the several rural US Mercury Deposition Network (MDN) sites with similar precipitation depth. The mercury concentration in precipitation did not show a positive correlation with atmospheric RGM (reactive gaseous mercury) concentration, while maintaining good correlation with atmospheric $PM_{2.5}$ at Soyang Dam. This result suggests that the contribution of particulate Hg to the total Hg wet deposition should be more significant than that of RGM. In this study, both precipitation depth and precipitation type affected the amount of wet deposition and the concurrent mercury levels in precipitation. There was generally an inverse relationship between precipitation depth and Hg concentration in precipitation. Precipitation type was another factor that exerted controls on the Hg concentration in precipitation. As a result, the highest concentration of Hg was observed in snow, followed by in mixture (snow+rain) and in rain.

• 한국압력기기공학회 논문집
• /
• 제14권1호
• /
• pp.38-47
• /
• 2018

For safe operation of nuclear power plants, a loose-part monitoring system (LPMS) is used to detect and locate loose-parts within the reactor coolant system, and to estimate their mass and damage potential. There are several methods to estimate mass, such as the center frequency method based on the Hertz's impact theory, a frequency ratio method and so on, but it is known that these methods cannot provide accurate information on impact response for identifying the impact source. Thanks to increasing computing power, finite element analysis (FEA) method recently become an available option to calculate reliably impact response behavior. In this paper, a finite element analysis model to simulate the propagation behavior of the bending wave, generated by a metal ball impact, is validated by performing a series of impact tests and the corresponding finite element analyses for flat plate and shell structures. Also, a FEA-based metal sphere signal map is developed, and then blind tests are performed to verify the map. This study provides an accurate simulation method for predicting the metal impact behavior and for building a metal sphere signal map, which can be used to estimate the mass of loose-parts on site in nuclear power plants.

• 한국농공학회논문집
• /
• 제55권1호
• /
• pp.39-48
• /
• 2013

The solar radiation is the primary energy source that drives many of the earth's physical and biological processes and climate change. Understanding its importance to the solar radiation observation is a key to understanding a broad range of natural processes, agricultural, energy and human activities. The purpose of this study is to estimate solar radiation using sunshine duration, and to estimate distribution of solar radiation using a topography factor considering surface slope and aspect in complex terrain. The result of regression analysis between ratio of solar radiation and sunshine duration from 2001 to 2010 shows high $R^2$ value of 0.878. Regression analyses indicated that topographic attributes including elevation, slope and aspect had significant effects on solar radiation. The variation of topographic factor with aspect and slope for the summer and winter are considered. The highest month of daily mean solar radiation at Jeju island appears in April of 20.61 $MJ{\cdot}m^{-2}{\cdot}day^{-1}$, and the lowest month appears in December of 6.90 $MJ{\cdot}m^{-2}{\cdot}day^{-1}$. These results provided useful quantitative information about the influence of topography on solar radiation in the island region.

• 수산해양기술연구
• /
• 제53권1호
• /
• pp.19-40
• /
• 2017

A scientific and objective sound exposure criterion for underwater sound damage on fish has been required since there has been many disputes between an underwater sound maker and a fish damage receiver. The existing criteria are still incomplete scientifically owing to a degree of variability of underwater sounds, diversity of fish hearing sensitivity and damage types, etc. This study reviews existing studies on a hearing mechanism of fish species, manmade underwater sound characteristics and sound exposure assessment parameters, and recent sound exposure criteria. A governing equation for damage coverage estimation and damage coverage dependency on sound source level, ambient noise and transmission loss are also reviewed and interpreted based on sound exposure environments. The foreign and Korean (National Environmental Dispute Medication Commission) criteria are reviewed and compared based on scientific aspects. In addition, the deficit and limit of Korean criteria are presented. The objective of this study is to give a direction for related researches and legislation of sound exposure criteria on fish.

• 한국대기환경학회지
• /
• 제25권6호
• /
• pp.539-549
• /
• 2009

The purpose of this study is to estimate hourly Asian dust emission flux in springtime by using the optimized Weather Research Forecasting model (WRF) in order to accurately predict the horizontal flux of Asian dusts. Asian dust emission flux using 5 empirical formulas such as US EPA, Park and Inn, Wang, The Goddard Chemistry Aerosol Radiation and Transport (GOCART) and Dust Entrainment and Deposition (DEAD) were calculated and compared by using classified land-use types and size distribution at various locations in China and Mongolia together with the hourly meteorological elements of the WRF model. As a result, the empirical formula in US EPA among them, which was considered the various conditions such as vegetation, soil type and terrain, was better than the other 4 empirical formulas. However, these formulas were adjusted hourly and vertically in time and space because there was different order and time resolution of dust emissions from original empirical formulas.

• Asian Pacific Journal of Cancer Prevention
• /
• 제17권11호
• /
• pp.4913-4916
• /
• 2016

Objective: As a source of information, medical data can feature hidden relationships. However, the high volume of datasets and complexity of decision-making in medicine introduce difficulties for analysis and interpretation and processing steps may be needed before the data can be used by clinicians in their work. This study focused on the use of Bayesian models with different numbers of nodes to aid clinicians in breast cancer risk estimation. Methods: Bayesian networks (BNs) with a retrospectively collected dataset including mammographic details, risk factor exposure, and clinical findings was assessed for prediction of the probability of breast cancer in individual patients. Area under the receiver-operating characteristic curve (AUC), accuracy, sensitivity, specificity, and positive and negative predictive values were used to evaluate discriminative performance. Result: A network incorporating selected features performed better (AUC = 0.94) than that incorporating all the features (AUC = 0.93). The results revealed no significant difference among 3 models regarding performance indices at the 5% significance level. Conclusion: BNs could effectively discriminate malignant from benign abnormalities and accurately predict the risk of breast cancer in individuals. Moreover, the overall performance of the 9-node BN was better, and due to the lower number of nodes it might be more readily be applied in clinical settings.

• 한국음향학회지
• /
• 제16권3호
• /
• pp.18-25
• /
• 1997

본 연구에서는 성문파에 의한 음원 특성과 입술에서 음성이 방사될 때 발생하는 방사 특성을 효과적으로 제거하기 위하여 성문파의 음원 특성과 입술에서의 방사 특성은 근사적으로 음파의 에너지와 비례한다고 가정하고, 정규화된 단구간 에너지를 이용하는 에너지 의존 프리엠퍼시스 기법을 제안하며, 이를 이용하여 비안정 구간인 발음의 시작 부분과 천이구간에 대하여 음성 신호 분석 성능을 개선하고자 한다. 제안된 프리엠퍼시스 기법을 이용하여 5개 한국어 단모음의 스펙트럼 및 형성음 주파수 추출 등의 음성 신호 분석을 수행하고, 기존에 널리 이용되던 두 가지 프리엠퍼시스 기법과 성능을 비교하여 본 결과, 제안된 방법에 의한 스펙트럼의 형태가 기존의 방법에 비하여 상당히 개선되었고, 보다 더 정확한 형성음 주파수를 나타내며, 인접한 두 형성음 주파수가 증첩되는 현상이 제거되었음을 알 수 있었다.

• 한국대기환경학회지
• /
• 제26권1호
• /
• pp.77-84
• /
• 2010

The diffusion and partition coefficients of polyurethane foam (PUF) are estimated using a microbalance experiment and small chamber test. The microbalance is used to measure sorption/desorption kinetics and equilibrium data. When the diffusion condition is controlled in the chamber of the sample, interactions between volatile organic compounds (VOCs) and PUF can lead to the estimation of a relatively homogenous rate of mass transfer in the interiors and surfaces of PUF. The estimates of the material/air partition coefficient (K) and the material-phase diffusion coefficient (D) are shown to be independent of the concentrations of VOCs. This approach, if applied to a diffusion-controlled or physically-based model, can facilitate more precise prediction of their source/sink behavior. Although further research and more rigorous validation is needed, an emission model applied with the diffusion and partition coefficients from this research holds promise for the improvement of reliability in predicting the behavior of VOCs emitted from porous building materials by D and K.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2007년도 춘계학술발표대회
• /
• pp.671-674
• /
• 2007

현재 다양한 분야(영화, 광고, AR 등)에서 영상합성 기법이 많이 사용되고 있다. 실제 영상에 가상의 객체를 합성하거나 가상의 환경에 객체를 합성하는 경우 등 영상과 객체간의 사실적인 합성결과를 얻기 위해서는 실제 환경에 적용된 광원의 정보가 필요하다. 본 논문에서는 실 세계 조명 정보를 표현하는 HDR(High Dynamic Range) 영상을 이용하여 실 세계의 광원을 추정하는 기법을 제안한다. 광원 추정을 위해 노출 시간을 달리한 일련의 LDR(Low Dynamic Range) 영상으로부터 실 세계정보를 선형적으로 표현할 수 있는 HDR 영상을 생성한다. HDR 영상을 가시화 한 후 영상에 나타나는 밝기 값을 기반으로 영상을 분할하고 분할된 영상들이 나타내는 빛의 세기에 비례하여 방향성 광원을 추정한다. 추정된 조명조건을 이용하여 IBL(Image Based Lighting)등의 전역조명 효과와 유사한 결과를 얻을 수 있으며 소수의 광원을 추정함으로써 실시간 렌더링이 중요한 가상현실이나 증강 현실 분야에도 적용할 수 있다. 또한 분할된 영상들로부터 광원을 추정하기 때문에 각각의 영상들이 오브젝트에 나타내는 조명효과도 확인할 수 있다.