• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.1077-1080
• /
• 2002

In building acoustics, reverberation time is an important acoustic parameter. However, it is often difficult to measure short reverberation times at low frequencies using the traditional band pass filter bank if the product of bandwidth (B) and reverberation time (T) is small. It is well known that the minimum permissible product of bandwidth and reverberation time of the traditional band pass filter is at least 16 ［F. Jacobsen, J. Sound Vib. 115, 163-170 (1987)]. This strict requirement makes it difficult to measure short reverberation times of an acoustic room at low frequencies exactly. In order to reduce this strict requirement, recently, the wavelet filter bank is developed and the minimum permissible product of bandwidth and reverberation time is replaced with 4 [S. K. Lee, J, Sound Vib. 252, 141-153 (2002)]. In the present paper, it is demonstrated how the short reverberation times at low frequencies are successfully measured by using the wavelet filter bank. In order to present this job, two synthetic signals and one measured signal are used for impulse responses of an acoustic room.

• Korean Journal of Clinical Laboratory Science
• /
• v.44 no.4
• /
• pp.205-209
• /
• 2012

Obstructive sleep apnea (OSA) is the most common type of sleep apnea and is caused by obstruction of the upper airway. It is characterized by repetitive pauses in breathing during sleep despite the effort to breathe. Apnea is closely related to clinical findings and respiratory disturbance index (RDI). The total subjects were 42 (male 26, female 16) and examined by polysomography (PSG) in terms of RDI above 5 and below 5 at Mok-Dong Hospital in Ewha Womans University from January to June, 2012. The study revealed the followings: The comparison of clinical findings and RDI above 5 showed significant increase in age, BMI, and snoring sound although lowest $SpO_2$ level decreased. The correlation coefficient analysis between clinical findings and RDI showed statistically significant correlation in age, BMI, lowest $SpO_2$ although snoring sound and average $SpO_2$ showed statistically insignificant correlation.

• KIEAE Journal
• /
• v.8 no.1
• /
• pp.31-36
• /
• 2008

For the comfortable housing life, comfortable and pleasant urban environment should be created for the people living in house and in city. There are lots of environmental conditions in city affecting house and life. Also most of all the noise pollution have been become major factor that makes people's life uncomfortable. Recently soundscape researches have been performed to create comfortable urban environment and various studies on the evaluation of urban environmental sounds are now undergoing. This study aimed to analyse the subjective characteristics through the subjective evaluation to the sounds measured with physical parameters and eventually to find out alternative evaluation method for urban environmental sounds. Adjectives applied to previous studies were used for the subjective evaluation and sound sources recorded in specific places were presented with picture at the same time. As a result, new physical parameters such as Lmax, Unbiased Annoyance, G, N and EmT have a feasibility to evaluation of urban environment sounds in terms of acoustic comfort.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1991.06a
• /
• pp.7-10
• /
• 1991

In a text-to-speech system, sound units (phonemes, words, or phrases, etc.) can be concatenated together to produce required utterance. The quality of the resulting speech is dependent on factors including the phonological/prosodic contour, the quality of basic concatenation units, and how well the units join together. Thus although the quality of each basic sound unit is high, if occur the discontinuity in the concatenation part then the quality of synthesis speech is decrease. To solve this problem, a smoothing operation should be carried out in concatenation parts. But a major problem is that, as yet, no method of parameter smoothing is available for joining the segment together. Thus in this paper, we proposed a new aigorithm that smoothing the unnatural discountinuous parts which can be occured in speech waveform editing. This algorithm used the exponential smoothing method.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1991.06a
• /
• pp.15-20
• /
• 1991

In a text-to-speech system, sound units (e. q., phonemes, words, or phrases) can be concatenated together to produce required utterance. The quality of the resulting speech is dependent on factors including the phonological/prosodic contour, the quality of basic concatenation units, and how well the units join together. Thus although the quality of each basic sound unit is high, if occur the discontinuity in the concatenation part then the quality of synthesis speech is decrease. To solve this problem, a smoothing operation should be carried out in concatenation parts. But a major problem is that, as yet, no method of parameter smoothing is availalbe for joining the segment together.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1997.10a
• /
• pp.237-243
• /
• 1997

Most outdoor sounds go from sources relatively near the ground to receivers near the ground. When either source or receiver are near the ground, interference can occur between the direct sound and that reflected at the ground which travels a slightly longer path. The sound pressure at the receiver is very different depending on the state of ground surface i.e. ground impedance. Ground impedances could be characterized by the value of a single parameter, namely the flow resistivity of the ground surface. This study suggests the measurement method of the flow resistivity using two microphones and predicts the flow resistivities of various ground surfaces.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.317-322
• /
• 2004

In this paper, It was describe the processes of development of HiFi speaker system. Woofer and tweeter were fabricated by unskilled students and their 1.5 parameters were identified by known mass method. Based on T-S parameters port enclosure was designed and built by means of software. Acoustic radiation phenomena of port enclosure were simulated and compared to test result. Acoustic pressure difference between lower frequency and higher frequency was flattened by adopting optimal crossover network. Finally, built HiFi speaker system was showed good sound quality and sound pressure and electrical impedance was well agreed with test results each other.

• International Journal of Control, Automation, and Systems
• /
• v.1 no.3
• /
• pp.289-300
• /
• 2003

In this paper, we introduce an identification method in Fuzzy Relation-based Fuzzy Neural Networks (FRFNN) through a hybrid identification algorithm. The proposed FRFNN modeling implement system structure and parameter identification in the efficient form of "If...., then... " statements, and exploit the theory of system optimization and fuzzy rules. The FRFNN modeling and identification environment realizes parameter identification through a synergistic usage of genetic optimization and complex search method. The hybrid identification algorithm is carried out by combining both genetic optimization and the improved complex method in order to guarantee both global optimization and local convergence. An aggregate objective function with a weighting factor is introduced to achieve a sound balance between approximation and generalization of the model. The proposed model is experimented with using two nonlinear data. The obtained experimental results reveal that the proposed networks exhibit high accuracy and generalization capabilities in comparison to other models.er models.

• Earthquakes and Structures
• /
• v.9 no.1
• /
• pp.111-126
• /
• 2015

In this study, the coupled effects of magnetic field, stress and thermal field on gravity waves propagating in a liquid layer over a solid surface are discussed. Due to change in temperature, initial hydrostatic stress and magnetic field, the gravity-sound Rayleigh waves can propagate in the liquid-solid interface. Dispersion properties of waves are derived by using classical dynamical theory of thermoelasticity. The phase velocity of gravity waves influenced quite remarkably in the presence of initial stress parameter, magneto-thermoelastic coupling parameter in the half space. Numerical solutions are also discussed for gravity-Rayleigh waves. In the absence of temperature, stress and magnetic field, the obtained results are in agreement with classical results.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.9 s.180
• /
• pp.2302-2312
• /
• 2000

An active control of the transmission of noise through an aircraft fuselage is investigated numerically. A cylinder-cavity system was used as a model for this study. The fuselage is modeled as a fi nite, thin shel cylinder with constant thickness. The sound field generated by an exterior monopole source is transmitted into the cavity through the cylinder. Point force actuators on the cylinder are driven by error sensor that is placed in 3D cavity. Modal coupling theory is used to formulate the numerical models and describe the system behavior. Minimization of the acoustic potential energy in the fuselage is carried out as a performance index. Continuous parameter genetic algorithm is used to search the optimal actuator position and both results are compared.