• Journal of the Korean Society of Safety
• /
• v.13 no.1
• /
• pp.34-39
• /
• 1998

This paper describes a evaluation method of sound power radiated from the vibrating faces of a single stage gear box using sound radiation. The vibration caused from meshing gears is transmitted to the gear box faces through shafts and bearings. A Boundary Element Method (BEM) is developed to calculate the sound power radiated from the faces with their velocity response which is based on the Building Block Approach (BBA). Radiation efficiency as well as the sound intensity on the surface of the gear box is also calculated. Sound power of the gear box is larger in the case that bearings have offset to the wall of the gear box than that bearings are on the center of the gear box. The sound power increases with the augmentation of the offset.

• International Journal of Automotive Technology
• /
• v.2 no.1
• /
• pp.33-38
• /
• 2001

The noise generated from a treadband mechanism of a tire has been the subject of this research. In particular, the treadband has been treated as an infinite tensioned beam resting on an elastic foundation which includes damping. The main objective is here to predict the sound power generated from a system mentioned above by locating harmonic point forces representing the excitation of treadband at the contact patch. It is possible to predict the sound power radiated from this structure by wavenumber transformation techniques. To find out the minimum radiated sound power, All parameters were varied. Thus this model can be used as a tire design guide for selecting parameters which produce the minimum noise radiation.

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.8
• /
• pp.708-718
• /
• 2002

In this paper, the problems in identifying the noise sources by using the sound intensity technique are dealt with for the general radiated near-field from vibro-acoustic sources. For this purpose, a three-dimensional model structure resembling the engine room of a car or heavy equipment is considered. Similar to the practical situations, the model contains many mutually coherent and incoherent noise sources distributed on the complicated surfaces. The sources are located on the narrow, connected, reflecting planes constructed with rigid boxes, of which a small clearance exists between the whole box structure and the reflecting bottom. The acoustic boundary element method is employed to calculate the acoustic intensity at the near-field surfaces and interior spaces. The effects of relative source phases, frequencies, and locations are investigated, from which the results are illustrated by the contour map, vector plot, and energy streamlines. It is clearly observed that the application of sound intensity technique to the reactive or reverberant field, e.g., scanning over the upper engine room as is usually practiced, can yield the detection of fake sources. For the precise result for such a field, the field reactivity should be checked a priori and the proper effort should be directed to reduce or improve the reactivity of sound field.

• The Journal of the Acoustical Society of Korea
• /
• v.42 no.1
• /
• pp.1-6
• /
• 2023

Sound radiated from a structure in vibration is an important physical characteristic to evaluate vibro-acoustic problem. Although sound radiation power can be typically obtained by intensity measurement, long measuring time and strict measuring condition remain difficult. As an alternative method, simulation-based estimation can be taken into account and its accuracy is known to be acceptable. However, difficulty still lies in that specialized softwares may be necessary to obtain sound radiation power and radiation efficiency. In this context, this study suggests two methods using an ordinary FE method to calculate sound radiation power. They are well-known reciprocity technique and p-p method, which are basically test methods. It is shown that either method can practically estimate sound radiation in the frame of conventional Finite Element Method (FEM). The methods and their corresponding limit are discussed with some results.

• Proceedings of the KSME Conference
• /
• 2000.04a
• /
• pp.591-595
• /
• 2000

Sound absorbing characteristics of poroelastic materials is known to be greatly affected by high intensity acoustic waves. However, this effect has not been considered yet. In this study, the extended semilinear model based on Biot's theory for the porous materials and the characteristics of nonlinear waves in poroelastic sound absorbing materials were introduced. The expressions for the finite-amplitude acoustic plane waves were presented. By combining each nonlinear wave with appropriate matching conditions, we could investigate the effects of finite-amplitude acoustic waves on absorption characteristics of poroelastic materials. In the most ideal case considered in this paper, the absorption coefficient was found to become larger than that of linear incident waves. It was shown that the absorption coefficient became greater especially as frequency goes higher and as distance from the source goes larger. These phenomena may be inferred to result from 'dissipation effects due to nonlinearity'. This finding may have important implications for high intensity noise control.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.6
• /
• pp.1188-1193
• /
• 2009

Todays, many young people suffer from noise-induced hearing loss by using wearable hearing devices, such as Bluetooth headset. This paper present hearing loss reduction and more natural volumn control algorithms considering individual hearing characteristics and threshold of feeling for Bluetooth headset. Experimental results using CSR Bluetooth headset example design board(DEV-PC-1645) show that individuals maybe able to perceive without the inconvenience at the less sound intensity and the more sensitive frequency bands. As a result, we may prevent hearing loss to reduce excessive sound energy in each frequency bands.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1996.04a
• /
• pp.257-262
• /
• 1996

The first purpose of this study investigates the influence of stiffening on the acoustic response of stiffened plates, which are often employed in steel structures. And the radiation efficiency is measured by average mean square velocity and sound intensity of stiffened plates. The second, it determines influence of mass, damp and stiffeness due to the partial adhesive visco-elastic material to reduce radiated sound power.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.191-194
• /
• 2004

This study Is an measurement and prediction of transmission loss through dash panel with multi-path in a vehicle. Measurement results of transmission loss are decided by sound power measured using the sound intensity method under locating a sound source in the anechoic room and reverberant room, respectively. Prediction one is decided by multi-path analysis of dash panel composed by a various part of materials and complicated shape. Finally, two results show a great agreement between measured and predicted transmission loss.

• The Journal of the Acoustical Society of Korea
• /
• v.15 no.4E
• /
• pp.65-71
• /
• 1996

In shallow water with a thermocline, the characteristics of sound propagation strongly depend on the signal frequency. When only one of the source and the receiver is above the themocline, it is known that the intensity of the received signal changes largely and almost periodically as the signal frequency varies. This is the so-called channel resonance. By using the ray-mode approach, the formula relating the resonance frequency and the sound speed profile is obtained, and the resonance phenomenon is analyzed. Also this analysis is verified by numerical calculation.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.7 no.2
• /
• pp.81-90
• /
• 1998

Noise produced by surface transportation vehicles affects our daily lives, penetrating wherver man lives or works. In this paper, a theoretical model has been studied to describe the sound radiation by the surface vibration of in-service tires and studied about an experiment on sound radiation characteristic due to tire vibration. When a tire is analyzed, it has been modeled as a curved beams with distributed sprongs and dash-pots which represent the radial, tangential stiffnes and damping of tire, respectively. The experimental investigation for the sound radiation of a radial tire has been made. Based on the sound intensity and STSF(Spatial Transformation of Sound Field) techniques. the sound pressure and the sound radiation are measured. The comparison of numerically analyzed results with experimental results was made seperately for the tire in rotation. As a result of this study, a program for the prediction of the tire vibration sound radiation was intended to by developed which enables a designer of a tire to foresee the influence of the various design factors on the tire vibration sound radiation.