• Animal Bioscience
• /
• v.35 no.9
• /
• pp.1454-1460
• /
• 2022

Objective: Early environmental enrichment in life can improve cognition in animals. The effect of prenatal auditory stimulation on learning ability and fear level in chick embryos remained unexplored. Therefore, this study investigated the effect of prenatal auditory stimulation on the learning ability and fear level of chicks. Methods: A total of 450 fertilized eggs were randomly divided into 5 groups, including control group (C), low-sound intensity music group (LM), low-sound intensity noise group (LN), high-sound intensity noise group (HN) and high-sound intensity music group (HM). From the 10th day of embryonic development until hatching, group LM and group LN received 65 to 75 dB of music and noise stimulation. Group HN and group HM received 85 to 95 dB of noise and music stimulation, and group C received no additional sound. At the end of incubation, the one-trial passive avoidance learning (PAL) task and tonic immobility (TI) tests were carried out, and the serum corticosterone (CORT) and serotonin (5-HT) concentrations were determined. Results: The results showed that compared with the group C, 65 to 75 dB of music and noise stimulation did not affect the PAL avoidance rate (p>0.05), duration of TI (p>0.05) and the concentration of CORT (p>0.05) and 5-HT (p>0.05) in chicks. However, 85 to 95 dB of music and noise stimulation could reduce duration of TI (p<0.05) and the concentration of CORT (p<0.05), but no significant effect was observed on the concentration of 5-HT (p>0.05) and PAL avoidance rate (p>0.05). Conclusion: Therefore, the prenatal auditory stimulation of 85 to 95 dB can effectively reduce the fear level of chicks while it does not affect the learning ability.

• The KIPS Transactions:PartA
• /
• v.18A no.1
• /
• pp.1-10
• /
• 2011

Physical modeling has been widely used for sound synthesis since it synthesizes high quality sound which is similar to real-sound for musical instruments. However, physical modeling requires a lot of parameters to synthesize a large number of sounds simultaneously for the musical instrument, preventing its real-time processing. To solve this problem, this paper proposes a single instruction, multiple data (SIMD) based multi-core processor that supports real-time processing of sound synthesis of gayageum which is a representative Korean traditional musical instrument. The proposed SIMD-base multi-core processor consists of 12 processing elements (PE) to control 12 strings of gayageum in which each PE supports modeling of the corresponding string. The proposed SIMD-based multi-core processor can generate synthesized sounds of 12 strings simultaneously after receiving excitation signals and parameters of each string as an input. Experimental results using a sampling reate 44.1 kHz and 16 bits quantization show that synthesis sound using the proposed multi-core processor was very similar to the original sound. In addition, the proposed multi-core processor outperforms commercial processors(TI's TMS320C6416, ARM926EJ-S, ARM1020E) in terms of execution time ($5.6{\sim}11.4{\times}$ better) and energy efficiency (about $553{\sim}1,424{\times}$ better).

• Journal of Broadcast Engineering
• /
• v.13 no.5
• /
• pp.602-611
• /
• 2008

The sound design performed in the production of media contents, such as TV, movie, and CF, have been conducted through the experienced feeling of some experts in the aspect of auditory effects that communicates stories. Also, there have been few studies of the quantitative approach and verification to apply visual and auditory effects felt by users. This study is a non-equivalent control group pretest-posttest design and investigates the difference in communication effects in which the difference in a sound design in the production of media contents that affects users. This study analyzed the brain quotient (BQ) obtained by the measurement of brain waves during the watching of an experiment image (track A) designed by using a 60-second TV CF only and an experiment image (track B) designed by sound effects and music and investigated which sound design represents differences in communication effects for users. The results of this investigation can be summarized as follows: First, in the results of the comparison of the attention quotient (ATQ), which is the BQ of recognition effects, between A and B tracks, the track A showed a higher difference in activation than the track B. It can be analyzed that the sound design based on music showed higher levels in attention and concentration than that of the sound effect design. Second, in the results of the comparison of the emotional quotient (EQ), which is emotional effects, between A and B tracks, the track A represented a higher difference than the track B. It means that the sound design based on music showed higher contribution levels in emotional effects than that of the design based on sound effects. Third, in the results of the comparison of the left and right brain equivalent quotient (ACQ), which is memory activation effects, between A and B tracks, there were no significant differences. In the results of the experiments, although there are some constraints in TV CF based on the conventional theories in which sound effects based design affects strong concentration, and music based design affects emotional feeling, the music based design may present more effects in continued concentration. In addition, it was evident that the music based design showed higher effects in emotional aspects. However, it is necessary to continue the study by increasing the number of subjects for improving the little differences in ACQ. This study is useful to investigate the communication effects of the sound based design in media contents as a quantitative manner through measuring brain waves and expect the results of this study as the basic materials in the fields of sound production.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.41 no.5
• /
• pp.49-56
• /
• 2004

A low power consuming voice signal processing and control module was designed using a small $\mu$-controller for use in a totally implantable middle ear system. The module was designed that it can control the implanted system as well as process the fitting algorithm of input sound signal. In ordinary operation mode, the $\mu$-controller processes the applied sound signal for compensating the hearing loss of the patients. When the control signal is applied from the IR receiving module, the $\mu$-controller interrupts the signal processing and executes the order of the control signals such as power on/off, volume up/down. The designed module was implemented and verified the performance of the system through several experiments.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.9
• /
• pp.2265-2271
• /
• 1994

With the improvement of standard of living, requirement for comfortable and quiet environment has been increased and, therefore, there has been a many researches for active noise reduction to overcome the limit of passive control method. In this study, active noise control is performed in a duct system using intelligent control technique which needs not decide the coefficients of high order filter and the mathematical modeling of a system. Back propagation algorithm is applied as an intelligent control technique and control system is organized to exclude the error microphone and high speed operational device which are indispensable for conventional active noise control techniques. Furthermore, learning is performed by organizing acoustic feedback model, and the effect of the proposed control technique is verified via computer simulation and experiment of active noise control in a duct system.

• Journal of the Korean Wood Science and Technology
• /
• v.40 no.4
• /
• pp.237-243
• /
• 2012

Sound absorption capability and anatomical features of the organosolv pretreated Japanese larch and yellow poplar wood were estimated by stereoscopic observation and two microphone transfer function method. Sound absorption capabilities of organosolv treated wood, in the entire estimated frequency range (50~6,400 Hz), were higher than those of control specimen. Especially, the treated wood's absorption capabilities measured in the frequency range of 2~4 kHz were about two times higher than those of control specimen. By the organosolv pretreatment (at $70{\sim}120^{\circ}C$), the weight loss of wood occurred in less than 1% of total weight of wood and the porosity of wood increased slightly. In addition, it was presupposed that microstructural changes of wood occurred during organosolv pretreatment and this structural changes cause the increasing of the sound absorption capability of wood.

• 한국연소학회:학술대회논문집
• /
• 2004.11a
• /
• pp.206-212
• /
• 2004

It is necessary to consider the stability, economic environmental-friendly problems by the development of the road, supply of the automobile, environmental problem as designing the exhaust system. To reduce the noise and the vibration of the automobile, it is needed to consider the pulsation noise, air current noise, vibration of air pipe which generate the intake and exhaust noise of the automobile. Moreover, the discharge sounds, intake sound, radiation sound, transmitted sound are occurred. To reduce this influence, the variable valve is needed and to control these factors, path transformation muffler and active type muffler are needed. While engine efficiency could be reduced with this transformationand resistance by the pressure, thermal property. In this study, how to design exhaust systems yielding higher condversion efficiency, lower backpressure and optimize the performance. this study is recommended for exhaust system and designers and engineers involved in SI engine exhaust system and it will furnish information for you to design more efficient.

• International journal of advanced smart convergence
• /
• v.8 no.4
• /
• pp.214-220
• /
• 2019

Hearing impaired people are apt to be in danger because they can't detect danger with sound. Hearing impaired people have less risk-detection ability than non-disabled people because of lack of hearing. There are many devices to help the hearing impaired, such as hearing aids. A hearing aids can be helpful, but it may not be available depending on the degree or type of hearing loss for example, to the hearing-impaired people with little remaining hearing of high frequencies, ordinary hearing aids are not very useful for understanding the high frequency consonants and it requires a high cost, from thousands to tens of thousands of dollars. Also, it is difficult for the underprivileged, such as the low-income bracket and the elderly, to use them because they are difficult to manage. Therefore, this paper describes the development of low-cost wearable device to assistant a hearing-impaired people using Arduino. Also, it accepts values from switches or sensors and can control external electronic devices such as LEDs and motors to create objects that can interact with the environment. In this is paper, through sound sensors, the ambient sound was taken as an analogue value and transmitted to the aduino board, and the vibration motor was operated when the noise was generated, so that the user could be aware of the occurrence of danger.

• The Journal of the Acoustical Society of Korea
• /
• v.36 no.2
• /
• pp.130-135
• /
• 2017

In this paper, we propose an interface for interactive sound experience in the virtual concert hall. The proposed interface consists of two systems, called 'virtual acoustic position' and 'virtual active listening'. To provide these systems, we applied an artificial reverberation algorithm, multi-channel source separation and head-related transfer function. The proposed interface was implemented by using Unity. The interface provides the virtual concert hall to user through Oculus Rift, one of the virtual reality headsets. Moreover, we used Leap Motion as a control device to allow a user experience the system with free-hand. And user can experience the sound of the system through headphones.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.11a
• /
• pp.69-74
• /
• 2006

It is known that the various noise sources which are engine, transmission, tire, intake system, etc exist at vehicle driving status. Specially noises which cannot be expected by a driver induce unpleasantness to all passengers. These noises are difficult to distinguish noise sources or specifications because of too many vehicle parts. Therefore in this paper, study on abnormal noise of bush on suspension system is performed by the measurement and analysis of the noises of bushings that are generated artificially. The measured noises are analyzed by two points-view of spectrum and sound quality. Finally, it is shown that the noise sources of bushings on the suspension system which are the pillow ball joint bush of a control arm and the rubber bush of a lower arm could be distinguished by the spectrum distribution and a index value based on tonality.