• Journal of KSNVE
• /
• v.7 no.4
• /
• pp.579-588
• /
• 1997

When a membrane couples with compressive fluid, waves on the membrane follow a typical dispersion relations. One of characteristics of this relations is that evanscent waves occur below cutoff frequency. We have attempt to use this spatially decaying characteristics as a low frequency sound absorber. Theoretical development has required to solve membrane-fluid coupled linear differential. The solution has been successfully obtained by using eigenfunctions. To assure the obtained solution, experiment was also performed. The comparison was quite satisfactory. We conclude, based on these theoretical as well as experimental evidences, that it is very likely possible to use a membrane as a low frquency sound control element.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.399-402
• /
• 1996

The electrodynamic loudspeakers should have a wide dynamic range to reproduce various sound levels. When the input signal is small, the radiated sound from the loudspeaker is not so much distorted. However, for large input signal with low frequency component the radiated sound is significantly distorted due to the nonlinearities of the loudspeaker. The suspension, damping, and magnetic flux of loudspeaker are the main sources of the nonlinearity. Such electromechanical parameters related to harmonic distortion have been represented by a polynomial model for diaphragm displacement, while each of the polynomial coefficient is evaluated by using the principle of harmonic balance experimentally. Based on the polynomial model, we designed a compensator for nonlinear harmonic distortion of direct radiator loudspeaker. Than observer is used to estimate the displacement of the loudspeaker diaphragm, which is rather difficult to measure directly in the conventional setting. The usefulness of the designed compensator is demonstrated by numerical simulations. Simulation results show about 30db decrease at the second and third higher harmonic distortions. We carry out an experiment on speaker to verify designed controller and nonlinear observer.

• Journal of Power System Engineering
• /
• v.3 no.3
• /
• pp.97-103
• /
• 1999

As the noise of ship engine room is too loud, the engineer who works in a ship engine-room has the trouble of hearing. In this paper deals the investigation of the noise of ship engine room and cabins with the internationally allowable noise exposure level and noise exposure time. Recently, the problem of engine-room noise is more serious because of shipowner wants to make small number and larger size of cylinder. Therefore, engineers work in a ship engine-room for a long time have the trouble of hearing when they are exposed the high noise level. In this study, two kinds of vessels were used to investigate the noise of engine room, engine-control room, bridge, offices and cabins. As criteria of sound levels, A-weighted sound pressure level and octave band pressure level were used.

• Proceedings of the KSRS Conference
• /
• 1998.09a
• /
• pp.138-148
• /
• 1998

The aim of the work described in this paper is to develop a complex underground acoustic system which detects and localizes the origin of an underground hammering sound using an array of hydrophones located about loom underground. Three different methods for the sound localization will be presented, a time-delay method, a power-attenuation method and a hybrid method. In the time-delay method, the cross correlation of the signals received from the way of sensors is used to calculate the time delays between those signals. In the power-attenuation method, the powers of the received signals provide a measure of the distances of the source from the sensors. A new hybrid method has been developed for estimating the origin of the underground acoustic source by coupling both methods. The Nelder-Meade simplex search algorithm is then used to numerically estimate the position of the source in those methods. For each method the sound localization is carried out in three dimensions underground. The distance between the true and estimated origins of the source is in some cases less than 6m for a search area of radius 250m.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2018.05a
• /
• pp.249-250
• /
• 2018

To control the floor noise generated in the apartment building, a method of reinforcing the floor at the floor is applied. However, since existing buildings are difficult to reinforce upper generations, the ceilings of lower generations should be reinforced. The purpose of this study is to analyze the reduction effect by measuring the impact noise after reinforcing the floor soundproofing material on the ceiling of the existing building. In order to ensure the economical efficiency and flame retardancy of the products used as building interior materials, the existing polyurethane foam was impregnated with mineral to prepare test specimens and attached to the concrete slab surface. As a result, it was shown that heavy impact sound can reduce 2dB~5dB and light impact sound can reduce 4~8dB.

• Journal of KSNVE
• /
• v.9 no.2
• /
• pp.302-309
• /
• 1999

In this paper, a circular lined-duct is modeled by using an axisymmetric foam finite element, which is based on elastic porous material theory of Biot. For various thicknesses of three kinds of lining materials, finite element predictions are compared with measurement results and Morse's analytical results. While the analytical model has larger error as the lining becomes thicker, results of the present model have a good agreement with experimental results for all the thicknesses considered here. It has also been found that constraining the axial motion on the circumferential surface of the lining enhances sound attenuation at low freqneucies.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.1037-1040
• /
• 2004

Sound and vibrations enter every aspect of our daily lives. Some, like music and verbal communications, soothe and relax us; others, such as the noise and vibration from traffic or machinery, can threaten our well being. The Rion Co., Ltd. was eslablished in 1944 as an affiliate of physics and acoustic pioneer, Kobayashi Institute of Physical Research. The RION lineup affords a full line of easy-to handle measuring, recording, and analyzing equipment with innumerable applications for monitoring and maintaining a comfortable environment. RION's concern takes in all manner of sound and vibration. Our activities extend from measuring reverberation time in concert halls and testing the soundproofing characteristics of housing materials to the control and maintenance of machine noise and vibration levels.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.04a
• /
• pp.904-908
• /
• 2008

As the various industrial production machinery has come into being by development of industrial technology, the productivity of the basic industrial production machinery has improved and the international competitiveness of the one of Korea has strengthened. However, at the same time, noise from various industrial production machinery disturbs the quiet environment. There are 35 kinds of the noise emission machinery defined in the noise and vibration control act according to the horse power and the number of machinery. These were classified in 1992 through investigation from 1990 to 1991, and the characteristic of the noise emission machinery may be different from the past one. So we need to investigate the characteristics of the noise emitted by machinery to control it rightly. Also we need to investigate the new noise emission machinery which has come into being recently. In this survey, we measured sound intensity of 32 noise emission machinery to calculate the sound power levels of those and investigated the characteristic of the sound power level of those according to the frequency. From the survey, we found that the forging machine, concrete pipe and pile making machine, sawing machine, etc. are the noisy machinery. And the automatic packing machine, sewing machine, centrifuge, etc. are the silent machinery. Also the generator, the concrete pipe and pile making machine, the printing machine, etc. emit the low frequency noise, and the molding machine, the stone cutter, the metal cutter, etc. emit the high frequency noise. Lastly, we intented to propose the proper guide line of classifying noise emission machinery.

• The Korean Journal of Pharmacology
• /
• v.10 no.1 s.15
• /
• pp.11-19
• /
• 1974

To see if the treatments of d-amphetamine and chlorpromazine have any influence upon the orienting response and general behavioral activity, 3 groups of male Holtzman rats were prepared, namely d-amphetamine animals (1.0 mg/kg.i.p.), chlorpromazine rats (1.0 mg/kg.i.p.) and the physiological saline control animals. The general behavioral activity was examined by visual scanning using the time-sample method in the adaptation period of orienting response. The occurence of orienting response and its rate of habituation were evaluated by observing cessation of ongoing activity in response to a sound stimulus (1,000 Hz, 70 db & 0.1 sec), or turning of head toward the source of stimulus in 20 trials. Attention shift from sound to light stimulus was also tested in 10 trials. The results obtained were as follows; 1. The general behavioral activity of d-amphetamine group was significantly greater than that of control, however, the chlorpromazine animals showed the tendency to decrease in activity. 2. The d-amphetamine group showed the occurence of orienting response to sound significantly more often than that of placebo controls. However, the chlorpromazine group exhibited significantly fewer orienting response than the placebo group did. 3. The d-amphetamine group displayed no clear out habituation to the orienting response following the repetition of trials, though the placebo and the chlorpromazine groups demonstrated apparent habituation to the response. 4. The three animal groups did not differ significantly from each other with regard to shift of attention from sound to light stimulus. It is inferred that the d-amphetamine tends to increase general activity has a definite facilitative action of orienting response and a inhibitory influence upon the habituation of the latter response. On the contrary, the chlorpromazine tends to decrease general activity, has a inhibitory action of orienting response and facilitatory action of habituation of the response.

• The Journal of the Acoustical Society of Korea
• /
• v.30 no.4
• /
• pp.197-206
• /
• 2011

In this paper, we proposes the virtual sound source panning algorithm in the multichannel system. Recently, High-definition (HD) and Ultrahigh-definition (UHD) video formats are accepted for the multimedia applications and they provide the high-quality resolution pixels and the wider view angle. The audio format also needs to generate the wider sound field and more immersive sound effects. However, the conventional stereo system cannot satisfy the desired sound quality in the latest multimedia system. Therefore, the various multichannel systems that can make more improved sound field generation are proposed. In the mutichannel system, the conventional panning algorithms have acoustic problems about directivity and timbre of the virtual sound source. To solve these problems in the arbitrary positioned multichannel loudspeaker system, we proposed the virtual sound source panning algorithm using multiple vectors base nonnegative amplitude panning gains. The proposed algorithm can be easily controlled by the gain control function to generate an accurate localization of the virtual sound source and also it is available for the both symmetric and asymmetric loudspeakers format. Its performance of sound localization is evaluated by subjective tests comparing with conventional amplitude panning algorithms, e.g. VBAP and MDAP, in the symmetric and asymmetric formats.