• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.894-896
• /
• 2003

Koh Chang Island is located near the east border of Thailand. The government of Thailand promotes the island as a model of eco-tourism spots. The Island undeveloped until recent years, is expected to change to major tourist attraction. 'Digital Koh Chang project' has thus. The main objective of this project is to monitor the environment and land use status of the island and to support its sound development. In March 2003, a field survey of this project was planned and field data were collected using both airborne and ground platforms and an ocean vessel. These data were combined with satellite data in the laboratory. This presentation is all balloon-born system field operation. A 5-meter length balloon filled with Helium gas was used, whose payload consisted of two RGB standard color digital still cameras, two directional rotating servo motors, a camera mount cradle as well as signal transmitting and receiving components. A series of aerial high-resolution digital images were rather easily obtained using this inexpensive system, making it possible to monitor intended landscape features in a specific field. Design of simple, low-cost and easily transportable flying platforms and local field surveys using them are useful for getting local ground truth data to calibrate satellite or airborne-based RS data. The design analysis to upgrade the system is further investigated.

• Journal of environmental and Sanitary engineering
• /
• v.3 no.2 s.5
• /
• pp.43-60
• /
• 1988

This study was carried out to determine traffic noise level and analyze noise reduction effects of various sound protection facilities in the area of Seoul, Inch'on, Songchoo and Seoul- Busan Expressway from March to Octover, 1987. The results were as follows; 1. As compared with the environmental standards and the traffic noise level in heavy noise areas, traffic noise levels observed were shown in higher than environmental standards. The noise levels in Seoul were determined at 12.8-18.2 dB(A) in daytime and 19.0-26.9 dB (A) in nighttime. And incase of inch'on, it were 6.7-9.6 dB(A) in daytime, 7.9-18.9 dB(A) in nighttime, respectively. 2. The environmental noise level observed in the backside of protection facilities, such as apartment, soundproof barrier and houses, which were constructed in paralled to the road was lower about 3-5 dB(A) than perpendicular to theroad. Noise recuction effect of upper stairs in apartment was higher than lower stairs. 3. The predicted noise level obtained from the equation $({\triangle}L\;=\; -10\;log\;(^{I'1}/Ii)\;was\;\pm\;1dB$ (A) and the correlation coefficient (r) was 0.923. 4. The noise reduction effect in backside of apartment was measured at on sites and predicted by total noise loss equation. The predicted noise level was 60.9 dB(A) and the measured level was 60.6 dB(A), respectively. 5. The narrow width landscape less than 10m width was almost no effect for the protection of traffic noise. According to the synthesis of the above results, the noise level of the road was exceeding mostly the environmental standard in the heavy traffic areas. The counterplan should be set as well. The insulation of noise protection facilities were effective by the location with near distance from the road edge. The reduction effect of double window in apartment was represented so much. The prediction model could be applied to estimate the noise levels in the roadside as well as the effectiveness for the noise protection facilities.

• Journal of the Korean Society of Costume
• /
• v.58 no.4
• /
• pp.155-170
• /
• 2008

Club culture is the global trend for youth in 21st century. Club is the space that is created with close relationship among music, dance and fashion. It is also experimental cultural art space with endlessly transforming style. Furthermore it is a space for independent minor culture which represents speciality than generality of cultural appetite and style of club. Cultural communities formed around club and their parties have placed as a strong subculture trend based on youth age group. What they are creating as a subculture could be our tomorrow's main trend and clubbers also could be our major power sources for future. Therefore it is necessary to pay attention to club culture. The purposes of this research are to identify the concept of clubber, to analyzes their basic club culture characteristics and elements, and to find out unique fashion styles of Korean clubber in comparison with the origin. To study club fashion style's origin and background, this study searched a theoretical flow from 1930's to 1990's. Then, Korean clubber's style is derived by comparing background and origin of Korean club culture with those of abroad. To analyze in various point of view, theoretical backgrounds about social, cultural, dresses, and design were considered. Since research target is a visual image, street fashion is analyzed on through, music channels and magazines from 1930's to present as well as designer's art photographies. Internet sites', cub culture association's and sound association's photos were also extracted. as a visual evidences to offer actual evidences. Geological targets are selected among Korean club culture's origin such as Hong-Ik University area, Shin-chon, Chungdam-dong and Apgujung-dong areas. The results of this study are as follows. Firstly, clubber's fashion style influenced magnificently on major fashion design instead of being just youngster's resistance toward control group and it is contributing to our fashion culture to enrich it. Secondly, fashion styles of korean clubbers are based on those of western sub-culture, but with a unique localized history.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.05a
• /
• pp.132-136
• /
• 2007

In case of indoor gymnastics training floor, in view of its characteristics, since it is simultaneously required the related smooth communication between the coach and the player, also the acoustic performance regarding to the Clearness of Music, besides the sport activity, the consideration about the acoustic character has entered the stage as an indispensable element. On such viewpoint, on the object of the recently built dome-typed gymnastics training floor, after making the optimized acoustic design with the remodeling through acoustic simulation, by means of measurement and valuation on human's psychological(sensual) degree utilizing Auralization that enables to experience the virtual sound field at the stage of design, this thesis has attempted to survey of the acoustic satisfaction degree and its reaction about the gymnastics training floor. As the result of investigation about the research on the space of object, it could be known that the valuation regarding to the acoustic performance of 'After-Improvement' was distinctly more refined than that of 'Before-Improvement'. It is now considering that such result of the study can be utilized as the useful data which enables to improve the retrenchment effect of the construction cost as well as the acoustic capability, by means of the prediction control on the acoustic problem from the stage of design, for the occasion when the similar indoor sport gymnasium is planning to build for the near future.

• Journal of the Korean Society of Visualization
• /
• v.14 no.1
• /
• pp.57-61
• /
• 2016

We report a finding of fast(exceeding 2,000 K/s) heating of polydimethylsiloxane(PDMS), one of the most commonly-used microchannel materials, under cyclic loadings at high(~MHz) frequencies. A microheater was created based on the finding. The heating mechanism utilized vibration damping of sound waves, which were generated and precisely manipulated using a conventional surface acoustic wave(SAW) microfluidic system, in PDMS. The penetration depths were measured to range from $210{\mu}m$ to $1290{\mu}m$, enough to cover most microchannel heights in microfluidic systems. The energy conversion efficiency was SAW frequency-dependent and measured to be the highest at around 30 MHz. Independent actuation of each interdigital transducer(IDT) enabled independent manipulation of SAWs, permitting spatiotemporal control of temperature on the microchip. All the advantages of this microheater facilitated a two-step continuous flow polymerase chain reaction(CFPCR) to achieve the billion-fold amplification of a 134 bp DNA amplicon in less than 3 min. In addition, a technique was developed for establishing dynamic free-form temperature gradients(TGs) in PDMS as well as in gases in contact with the PDMS.

• The Journal of the Korea Contents Association
• /
• v.17 no.3
• /
• pp.421-430
• /
• 2017

In this paper, research results on the change of music emotion are described. Our gaol was to provide a method of changing music emotion by a human user. Then we tried to find a way of transforming the contents of the original music into the music whose emotion is similar with the changed emotion. For the purpose, a method of changing the emotion of playing music on two-dimensional plan was describe. Then the original music should be transformed into the music which emotion would be equal to the changed emotion. As the first step a method of deciding which music factors and how much should be changed was presented. Finally the experimental method of editing by sound editor for changing the emotion was described. There are so many research results on the recognition of music emotion. But the try of changing the music emotion is very rare. So this paper would open another way of doing research on music emotion field.

• Journal of Korean Society of Disaster and Security
• /
• v.6 no.3
• /
• pp.19-27
• /
• 2013

Along with green growth era in the 21st century and with the increasing economic, social, and cultural stabilization, people expect absolute freedom from the drought and flood and long for ecological exchange in the waterfront as a part of the living base at the same time. In order to match the changes in social demand, the focus on the river management policy urgently requires a comprehensive river management that considers the nature's environmental and ecological aspects as well as a new disaster prevention approach that grows out of existing simple flood prevention. Therefore, this thesis provides feasible solutions by suggesting the following findings to maintain and manage rivers to be harmonized with the natural environment considering disaster prevention aspects. It is necessary to change the river management policy and integrated river basin management, to control the river management lead by the central government and to promote close-to-nature river management approach for environmentally sound and sustainable development.

• Explosives and Blasting
• /
• v.34 no.4
• /
• pp.10-18
• /
• 2016

Explosive blasting utilizes the energy produced from the explosion of explosive materials. Since the black powder, the first type of explosive, was invented, various types of explosives have been developed until a recent emulsion explosive which is powerful as well as safe in use. The detonators continue to be developed from safety fuse to the recent electronic detonators which allow extremely accurate and flexible control of delay time. However, the good explosives and detonators do not always lead to the good blast results. It entirely depends on the blast engineer. It is necessary to develop the empirical or theoretical models based on the field experience and sound theoretical algorithm. Such models would be very useful for blast design and, furthermore, provide the idea of further technical development. This paper introduces some models used in explosive blasting and attention to be paid for field application.

• Proceedings of KOSOMES biannual meeting
• /
• 2006.11a
• /
• pp.125-129
• /
• 2006

It is very important to remove the noise levels made by an electric home appliance and machines they are located in the auditory region. The noise of ship engine room is known as it is not easy to lower so the working environment of the engine room is the worst condition because the improvement for the noise seemed insignificant and the hearing loss is occurred. As the monitoring equipment and an intelligent control system are improved rapidly the main engine of the ship can be enclosed with an acoustic barrier and any other absorbtion equipment. In this study, the sound absorbtion barrier is experimentally researched by change the volume and the length of the neck for the Helmholtz resonator as the resonator can absorb the noise effectively.

• Journal of Korea Multimedia Society
• /
• v.13 no.2
• /
• pp.308-315
• /
• 2010

User Generated contents(UGC) interchange with internet users actively in Web2.0 environment. According to growth of content sharing site, the number of non-expert's contents increased. But non-expert's contents have a simple media just recorded. For providing actual feeling like effects and actions to non-expert's contents, we suggest Fusion Media Middleware(FMM). The FMM can increase user satisfaction by providing actual feeling. Furthermore, The content changes advanced media that has emotional impression. The FMM for providing actual feeling classify the inputted media as a scene based on MPEG-7. The FMM provide an actual feeling to simple media by inserting effects like a sound, image and text among the classified media. Using the BSD code of MPEG-21, the FMM can link up with inputted media and effects. Through the mapping BSD code the FMM control synchronization between media and effects. In this paper, Using the Fusion Media Middleware, the non-expert's contents express value as multimedia that has an actual feeling. Futhermore, the FMM creates flow of new media circulation.