• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.1442-1445
• /
• 2007

Just noticeable differences (jnds) of autocorrelation function (ACF) parameters - Phi (0), Tau 1 and Phi 1 - of household refrigerator noise were investigated by psychoacoustical analyses. Phi (0) of five refrigerators' noise was changed with equal (${\pm}$) interval level of 0.5-1.0 dB up to five intervals by manipulating sound pressure level of the noise. Tau 1 and Phi 1 were varied with equal (${\pm}$) interval of around 0.10 ms and 0.02, respectively. Pitch shifting and strengthen methods were applied for the Tau 1 and Phi 1 variations. As results of subjective evaluations, about 2.0 dB was shown as jnd of Phi (0). The values of 0.30 ms and 0.06 were found as jnds of Tau 1 and Phi 1, respectively. The jnd results of each ACF parameter can be applied to explain substantial amount of sound quality (SQ) enhancement in the SQ prediction indices which were proposed in the authors' previous study [Sato et al. (2007) J. Acoust. Soc. Am.].

• 방송공학회논문지
• /
• 제18권6호
• /
• pp.919-926
• /
• 2013

실내 환경에서 음성 신호는 음향 전달 함수에 의한 반향 신호를 포함한다. 이때 반향의 정도나 반향에 의한 음질 변화를 예측하는 것은 반향 제거 알고리즘 등에서 중요한 정보를 제공한다. 본 논문은 음성 신호의 하모닉 모델링 기법을 이용한 반향 환경에서의 자동 음질 예측 기법을 제안하다. 제안한 방법에서는 반향을 포함하는 음성 신호에 대한 하모닉 모델링 기법이 가능함을 보이고, 모델링된 하모닉 성분과 나머지 성분 사이의 통계적인 비율을 예측한다. 예측된 비율은 일반적인 방 환경에서의 음질 측정 표준 파라미터와 비 교하였다. 실험 결과 제안된 방법은 다양한 반향 환경 (반향 시간 0.2~1.0초)에서 표준 음질 파라미터를 정확하게 예측할 수 있음을 증명하였다.

• 한국의류산업학회지
• /
• 제14권3호
• /
• pp.486-491
• /
• 2012

This study examined the sound characteristics of Taekwondo uniform fabrics to investigate the relationship between the sound parameters and the mechanical properties of the fabric as well as to provide the conditions to maximize the frictional sound of the uniform. Frictional sounds of 6 fabrics for Taekwondo uniforms were generated by the Simulator for Frictional Sound of Fabrics. The frictional speeds were controlled at low(0.62 m/s), at mid(1.21 m/s) and at high(2.25 m/s) speed, respectively. The frictional sounds were recorded using a Data Recorder and Sound Quality System subsequently, the physical sound properties such as SPL(Sound Pressure Level) and Zwicker's psychoacoustic parameters were calculated. Mechanical properties of specimens were measured by KES-FB. The SPL, Loudness(Z) values increased while Sharpness(Z) value decreased. In the physical sound parameter, specimen E had the highest SPL value at low speed and specimen B at high speed. In case of Zwicker's psychoacoustic parameters, the commercially available Taekwondo uniform fabrics(E, F) showed higher values of Loudness(Z), Sharpness(Z), and Roughness(Z), that indicates they can produce louder, shaper and rougher sounds than other fabrics for Taekwondo uniforms. The decisive factors that affected frictional sounds for Taekwondo uniforms were W(weight) as well as EM(elongation at maximum load) at low speed and WC(compressional energy) at high speed.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.317-322
• /
• 2004

In this paper, It was describe the processes of development of HiFi speaker system. Woofer and tweeter were fabricated by unskilled students and their 1.5 parameters were identified by known mass method. Based on T-S parameters port enclosure was designed and built by means of software. Acoustic radiation phenomena of port enclosure were simulated and compared to test result. Acoustic pressure difference between lower frequency and higher frequency was flattened by adopting optimal crossover network. Finally, built HiFi speaker system was showed good sound quality and sound pressure and electrical impedance was well agreed with test results each other.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.421-426
• /
• 2005

For the air-conditioner, refrigerant induced noise and vibration should be the problem when it reduced airflow rate in order to reduce the noise at low mode. With the test, it could be verified that one of the main reason for refrigerant induced noise were the velocity and flowing induced force of the refrigerant at the inlet of evaporator. So in order to reduce this velocity with same mass flow rate of refrigerant, quality at the evaporator inlet should be minimized. And in order to reduce flowing induced force of the refrigerant, flowing direction change should be eliminated. So in this paper, it would like to review the characteristics of refrigerating cycle at first and find how the quality and flowing induced force can be minimized.

• Journal of Advanced Marine Engineering and Technology
• /
• 제30권5호
• /
• pp.629-635
• /
• 2006

Manufacture of motor by laser has been studying realization that was demands on market for lightening and miniaturization. Moreover. early in the 1980s. manufacture of parts for automobiles by laser welding was already successfully introduced. The purpose of this study was to develop production technology of the high quality laminated stator core for motor by pulsed Nd:YAG laser heat source. In the event of adjusting defocus and voltage to control humping in laser welding of the laminated core. sound bead could be obtained. but deep penetration was not. Therefore. explosive evaporating plasma was controlled by adjustment of peak power on pulse width. Particularly, because explosive evaporating plasma induced high peak power, made molten metal in keyhole scatter. a suitable adjustment of peak power was required to obtain sound bead. As a results of experiment. sound bead and deep penetration could be obtained.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 춘계학술대회 논문집
• /
• pp.91-93
• /
• 2009

A large steel ingot needs to be larger and larger in size and an ultra high clean, no defect in quality with a low hot top ratio for the resent heavy industry. The demands are very difficult to achieve simultaneously because of their contradictive effect to each other in results. In this study, 30ton steel ingot was cast in a foundry with an optimized design parameter of cast mold and cast process conditions for the low hot top ratio, 12%. The cast ingot was analyzed in macro defect, segregations, and cleanness. No macro defect was founded in central surface of the ingot. The degree of segregation and cleanness are in the controlled range with a sound quality.

• 한국융합학회논문지
• /
• 제8권5호
• /
• pp.193-200
• /
• 2017

본 연구는 지역산업진흥정책의 기업지원서비스 수혜기업을 대상으로 기업지원사업을 통해 제공받은 서비스의 융복합 요인이 종합만족도에 미치는 영향과 종합만족도가 기업성과에 미치는 영향을 분석하였다. 분석 결과 기업지원 서비스 품질 요인 중 지원품질을 제외한 지원과정 및 지원결과 요인은 종합만족도에 유의한 영향을 미치는 것으로 분석되었으며, 종합만족도는 기업성과에도 유의한 영향을 미치는 것으로 분석되었다. 이에 본 연구는 기업지원 서비스 품질 중 종합만족도 및 기업성과를 향상시키기 위해 보완되어져야 하는 서비스의 융복합 요인의 판단 근거를 제시했다는 점에서 의의를 지니고 있다.

• 방송공학회논문지
• /
• 제10권3호
• /
• pp.328-338
• /
• 2005

멀티채널 오디오 컨텐츠에 대한 사용자의 욕구가 증가하고 있는 가운데 서비스를 위한 저비트율 멀티채널 오디오 부호화 기술에 대한 표준화가 진행되고 있다. 본 논문에서는 협대역폭 채널환경에 적합한 고압축율의 멀티채널 오디오 부호화 기술인 음원위치단서 부호화 기술(Sound Source Location Cue Coding; SSLCC)을 제안하고, SSLCC가 기존 BCC (Binaural Cue Coding)의 압축 성능을 향상시키기 위하여 단서로 이용한 VSLI (Virtual Source Location Information)를 설명한다. 또한 객관적 평가로 기존의 BCC 시스템과의 평균 비트율을 비교하고, MUSHRA (Multi-Stimulus test with Hidden Reference and Anchor) 방법을 이용한 주관 청취 평가를 수행하여 제안된 SSLCC 부호화 기법의 우수성을 확인하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.497-502
• /
• 2005

In mobile phones of multimedia era, microspeakers of high quality sound are essential parts to generate human voice in speaker phone and MP3 song player. In this paper, two types of microspeakers, outer permanent magnet (PM) and combined PM type, are analyzed using electromagnetic, mechanical, acoustical and their coupling analysis. For performance comparison, voice coil diameter is chosen as a design parameter to change excitation position and magnet volume for both types. For combined PM type, sound pressure level (SPL) is improved due to increased PM volume compared to outer PM type. Also, with the decreased voice coil diameter for combined PM type, the 1st resonant mode of the diaphragm is more efficiently excited due to concentrative excitation, resulting in lower and broader frequency range. Therefore, it can be said that the combined PM type microspeakers are more advantageous for high performance microspeaker which are essential for multimedia era.