• 상하수도학회지
• /
• 제21권1호
• /
• pp.27-36
• /
• 2007

Milled Korean pine (Pinus densiflora) wood was used to evaluate its adsorption capacity of Cu(II) ions from aqueous solution by running a series of batch experiments. Prior to the tests, the milled woods were pretreated with 1N NaOH, 1N $NHO_3$, and distilled water, respectively, to examine the effect of pretreatment. Within the tested pH range in this study between 3 and 6, copper adsorption efficiency of NaOH-treated wood(96~99%) was superior than $NHO_3$-treated wood(19~31%) and distilled water-treated wood(18~35%). Adsorption behavior of copper onto both raw and $NHO_3$-treated woods was mainly attributed to interaction with carboxylic acid group. For NaOH-treated wood, carboxylate ion produced by hydrolysis was a major functional group responsible for Cu sorption. NaOH treatment of wood changed the ester and carboxylic acid groups into carboxylate group, whereas $NHO_3$ treatment did not affect the production of functional groups which could bind copper. A pseudo second-order kinetic model fitted well for the sorption of copper ion onto NaOH-treated wood. A batch isotherm test using NaOH-treated wood showed that equilibrium sorption data were better represented by the Langmuir model than the Freundlich model.

• Nuclear Engineering and Technology
• /
• 제53권5호
• /
• pp.1717-1722
• /
• 2021

This study is devoted to the ability of carbon fiber material samples impregnated with various amounts of barium iodide and triethylenediamine to remove radioactive methyliodide from air streams. The main sorption characteristics of impregnated UVIS® carbon fiber were determined and the use of this material for purifying of technological gas flows at nuclear power plants was evaluated. The methyliodide trapping efficiency by samples impregnated with barium iodide, TEDA, and their mixture was 83.4 ± 0.8%; 93.1 ± 0.6% and 93.5 ± 0.7% respectively, under the same conditions. The study established a significantly higher capacity (8.3 ± 0.07 mg/cm²) of samples impregnated simultaneously with both chemical compounds toward methyliodide. Under the same test conditions, the values of this parameter for the samples impregnated separately with TEDA and BaI₂ were 2.85 ± 0.05 mg/cm² and 0.86 ± 0.04 mg/cm², respectively.

• 산업기술연구
• /
• 제27권A호
• /
• pp.195-202
• /
• 2007

Milled Korean pine (Pinus densiflora) wood was used to evaluate its adsorption capacity of Cu(II) ions from aqueous solution by running a series of batch experiments. Prior to the tests, the milled woods were pretreated with 1N NaOH, 1N $HNO_3$, and distilled water, respectively, to examine the effect of pretreatment. Within the tested pH range between 3 and 6, copper adsorption efficiency of NaOH-treated wood(96~99%) was superior to the $HNO_3$-treated wood(19~31%) and distilled water-treated wood(18~35%). The efficiency of copper removal by wood enhanced with increasing solution pH and reached a maximum copper ion uptake at pH 5~6. Adsorption behavior of copper onto both raw and $HNO_3$-treated woods was mainly attributed to interaction with carboxylic acid group. For NaOH-treated wood, carboxylate ion produced by hydrolysis or saponification was a major functional group responsible for Cu sorption. NaOH treatment of wood changed the ester and carboxylic acid groups into carboxylate group, whereas $HNO_3$ treatment did not affect the production of functional groups which could bind copper. A pseudo second-order kinetic model fitted well for the sorption of copper ion onto NaOH-treated wood. A batch isotherm test using NaOH-treated wood showed that equilibrium sorption data were better represented by the Langmuir model than the Freundlich model.

• 한국광물학회지
• /
• 제25권4호
• /
• pp.185-195
• /
• 2012

나노 크기 매킨나와이트(FeS)는 높은 환원력, 흡착성, 그리고 비표면적을 지니고 있어, 염소유기물의 분해와 중금속 및 비금속의 제거에 유용하다. 하지만 매킨나와이트 나노입자는 콜로이드 안정성(colloid stability)의 변화로 지하수 흐름에 따라 쉽게 확산되거나, 입자집적(particle aggregation)에 의해 대수층의 공극을 막을 수 있다. 따라서 투과반응벽(permeable reactive barrier)에 적용하기 위해서 적절한 공학적 변형이 필요하다. 본 연구에서는 코팅법을 적용해 나노크기 매킨나와이트를 변형시킴으로써 본래의 반응성을 유지하고 또한 경제적인 투과반응벽의 설치에 활용하고자 한다. 이를 위해 화학적 처리를 하지 않은 규사(non-treated silica sand, NTS)와 화학적 처리에 의해 불순물이 제거된 규사(chemically treated silica sand, CTS)를 사용해 매킨나와이트를 코팅시켰다. 두 규사 모두 약 pH 5.4에서 매킨나와이트가 최대로 코팅되었으며, 이 pH는 (1) 매킨나와이트의 용해도, (2) 규사 및 매킨나와이트의 표면전하(surface charge)에 의해 영향받았다. 최적 pH에서 NTS와 CTS에 의한 코팅량은 각각 0.101 mmol FeS/g, 0.043 mmol FeS/g으로, NTS 표면에 존재하는 산화철 등의 불순물에 의해 매킨나와이트의 코팅이 현저히 증가했다. 한편 혐기성 조건에서 코팅되지 않은 규사 2종과 최적 pH에서 코팅된 규사 2종을 이용해 아비산염(arsenite)의 흡착실험을 실시했다. pH 7에서 코팅되지 않은 NTS와 코팅된 NTS에 의한 아비산염의 상대적 제거율은 아비산염의 초기 농도에 따라 달라졌다. 낮은 농도에서 코팅되지 않은 NTS가 높은 아비산염의 제거율을 보였으나, 높은 농도에서는 코팅된 NTS가 상대적으로 높은 제거율을 보였다. 이런 차이는 아비산염은 낮은 농도에서 규사 표면에 존재하는 산화물과의 표면배위결합(surface complexation)에 의해 제거되었고, 높은 농도에서 코팅된 매킨나와이트와 반응해 황화비소(arsenic sulfides)로 침전되었기 때문이다. pH 7에서 코팅된 NTS에 비교해 코팅된 CTS는 현저히 낮은 아비산염 제거율을 보였는데, 이는 CTS의 상대적으로 낮은 매킨나와이트 코팅량에 기인했다. 따라서 코팅된 NTS는 코팅된 CTS보다 아비산염의 제거를 위한 투과반응벽의 설치에 더 적합한 물질이며, 특히 아비산염의 오염도가 심한 지하수의 복원에 유용하게 적용될 수 있다.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제12권3호
• /
• pp.23-28
• /
• 2007

동전기적 처리에 의한 무기 오염 물질의 이동 및 제거율을 조사하기 위해 일련의 흡착/탈착 실험 및 동전기 정화 실험을 실시하였다. 동전기적 효과로 인해 발생된 양극 부근에서의 탈착 현상 및 음극 부근에서의 침전 현상을 중금속으로 오염된 점토 시료의 흡착 및 탈착 특성과 비교하여 분석하였다. 제거 효율은 300 V/m의 전압구배로 약 4시간의 동전기적 처리 결과 80% 정도의 높은 제거 효율을 확인할 수 있었다.

• 상하수도학회지
• /
• 제33권2호
• /
• pp.131-140
• /
• 2019

This study used a packed column reactor and a horizontal flow mesh reactor to examine the removal of copper ions from aqueous solutions using pine bark, a natural adsorbent prepared from Korean red pine (Pinus densiflora). Both equilibrium and nonequilibrium adsorption experiments were conducted on copper ion concentrations of 10mg/L, and the removals of copper ions at equilibrium were close to 95%. Adsorption of copper ions could be well described by both the Langmuir and Freundlich adsorption isotherms. The bark was treated with nitric acid to enhance efficiency of copper removal, and sorption capacity was improved by about 48% at equilibrium; mechanisms such as ion exchange and chelation may have been involved in the sorption process. A pseudo second-order kinetic model described the kinetic behavior of the copper ion adsorption onto the bark. Regeneration with nitric acid resulted in extended use of spent bark in the packed column. The horizontal flow mesh reactor allowed approximately 80% removal efficiency, demonstrating its operational flexibility and the potential for its practical use as a bark filter reactor.

• 자원환경지질
• /
• 제51권6호
• /
• pp.531-542
• /
• 2018

대나무 활성탄을 흡착제로 사용하여 우라늄으로 오염된 지하수를 정화하는 흡착 배치실험을 수행하였다. 국내에서 판매되는 두 종류의 대나무 활성탄을 사용하여 다양한 우라늄 농도를 가지는 인공오염수를 대상으로 활성탄 투입량에 따른 제거효율 변화를 측정하였다. 인공오염수의 다양한 pH, 온도, 흡착 시간 조건에서 흡착실험을 반복하여, 최적의 제거효율을 나타내는 대나무 활성탄의 적용 조건을 결정하였다. 실험 결과, 인공오염수에 대한 대나무 활성탄의 우라늄 제거효율은 70 ~ 97 %를 나타내었으며, 우라늄 농도가 0.14 mg/L인 실제 우라늄 오염지하수에 대한 제거효율도 84 %로 매우 높았다. 오염수의 온도의 경우 $10{\sim}20^{\circ}C$ 범위, pH는 5 ~ 9 범위에서 우라늄 제거효율 변화가 크지 않아, 현장에서 별도의 추가 처리 없이 오염지하수에 적용할 수 있을 것으로 판단되었다. 흡착실험 결과로부터 대표적인 흡착등온선을 도시한 결과, 우라늄에 대하여 대나무 활성탄은 Langmuir 흡착특성을 나타내었으며, A type과 C type 대나무 활성탄의 최대흡착농도($q_m:mg/g$)값은 각각 200.0 mg/g와 16.9 mg/g으로 높게 나타났다. 오염수 100 mL에 대나무 활성탄 2 g(2 wt%)을 첨가한 경우, 초기 우라늄 농도가 0.04 ~ 10.8 mg/L 범위에서 분리상수 값(separation factor: $R_L$)과 표면흡착률 값(surface coverage: ${\theta}$)이 1 이하로 낮게 유지되어, 다양한 우라늄 농도 범위를 가지는 오염지하수에 대하여 적은 양의 대나무 활성탄으로 효과적으로 정화할 수 있을 것으로 판단되었다.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제27권4호
• /
• pp.49-62
• /
• 2022

The magnesium and iron-based layered double hydroxide (Mg-Fe LDH) was synthesized by the co-precipitation process and the bead type LDH (BLDH, 5~6 mm in diameter) was manufactured by using the Mg-Fe LDH and the starch as a binder. To evaluate the feasibility of the BLDH as the As stabilizer in the soil, various experiments were performed and the As stabilization efficiency of the BLDH was compared to that of powdered type LDH (PLDH, <149 ㎛ in diameter). For the As sorption batch experiment, the As sorption efficiency of both of the PLDH and the BLDH showed higher than 99%. For the stabilization experiment with soil, the As extraction reducing efficiency of the PLDH was higher than 87%, and for the BLDH, it was higher than 80%, suggesting that the BLDH has similar the feasibility of As stabilization for the contaminated soil, compared to the PLDH. From the continuous column experiments, when more than 7% BLDH was added into the soil, the As stabilization efficiency of the column maintained at over 91% for 7 pore volume flushing (simulating about 21 months of rainfall) and slowly decreased down to 64% after that time (to 36 months) under the non-equilibrium conditions. Results suggested that more than 7% of BLDH added in As-contaminated soil could be enough to stabilize As in soil for a long time. The main As fixation mechanisms on the LDH were also identified through the X-ray fluorescence (XRF), the X-ray diffraction (XRD), and the Fourier transform infrared (FT-IR) analyses. Results showed that the LDH has enough of an external surface adsorption capacity and an anion exchange capability at the interlayer spaces. Results of SEM/EDS and BET analyses also supported that the Mg-Fe LDH used in this study has sufficient porous structures and outer surfaces to fix the As. The reduction of carbonate (CO₃^2-) and sulfate (SO₄^2-) anions in the LDH after the reaction between As and the LDH was observed through the FT-IR, the XRF, and the XRD analyses, suggesting that the exchange of some of these anions with the arsenate (H₂AsO₄^- or HAsO₄^2-) occurs at the LDH interlayers during the stabilization process in soil.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 1999년도 추계학술발표회
• /
• pp.7-11
• /
• 1999

Soil washing process being operated in ex-situ mode using surfactants could be appropriate one of the most effective one for remediation. The choice of surfactants has been considered most significantly to accomplish tile reduction of expenditure and the increase of efficiency. This study was carried out screening test and solubility, washing experiment, and surfactant sorption experiments for 18 kinds of surfactant obtained. Results from each surfactant's PSR obtained by the slope indicated that nonionic surfactants have much higher solubility for HOCs than anion surfactants for that. The washing experiment to find out a removal efficiency of each surfactant's TPH, LE1017 and LE1019 showed high removal efficiency. Through on the result of estimating the extent of adsorption of surfactants for soils, nonion surfactants showed higher adsorption to soils than anion surfactants.

• Environmental Engineering Research
• /
• 제21권2호
• /
• pp.152-163
• /
• 2016

Present study investigates the potential of cassava peel and rubber tree bark for the removal of Cr (VI) from aqueous solution. Removal efficiency of more than 99% was obtained during the kinetic adsorption experiments with dosage of 3.5 g/L for cassava peel and 8 g/L for rubber tree bark. By comparing popular isotherm models and kinetic models for evaluating the kinetics of mass transfer, it was observed that Redlich-Peterson model and Langmuir model fitted well ($R^2$ > 0.99) resulting in maximum adsorption capacity as 79.37 mg/g and 43.86 mg/g for cassava peel and rubber tree bark respectively. Validation of pseudo-second order model and Elovich model indicated the possibility of chemisorption being the rate limiting step. The multi-linearity in the diffusion model was further addressed using multi-sites models (two-site series interface (TSSI) and two-site parallel interface (TSPI) models). Considering the influence of interface properties on the kinetic nature of sorption, TSSI model resulted in low mass transfer rate (5% for cassava peel and 10% for rubber tree bark) compared to TSPI model. The study highlights the employability of two-site sorption model for simultaneous representation of different stages of kinetic sorption for finding the rate-limiting process, compared to the separate equilibrium and kinetic modeling attempts.