• Journal of the Korean Magnetic Resonance Society
• /
• v.24 no.4
• /
• pp.96-103
• /
• 2020

A new NMR method to monitor solvent-localized NMR signals in the two-phase liquid system is suggested. This method based on intermolecular single-quantum coherence (iSQC). Here, we exploited the feature of the local action of distant dipolar field (DDF) effect in order to filter out specific NMR signals dissolved in different solvents. This solvent specific iSQC spectroscopy was carried out on a model two-phase liquid system (D-glucose in water/palmitic acid in chloroform), and showed solvent-localized NMR signals. We believe our approaches might be useful in metabolic analysis such as two-phase liquid extraction scheme for labile chemical species.

• Journal of the Korean Society of Safety
• /
• v.20 no.3 s.71
• /
• pp.134-142
• /
• 2005

This study is to find out how organic solvent will be propagated from painting inside the steel box girder of bridge. $2.9m{\times}3.0m$ of inside size of steel box girder is not suitable for painters to do his work comfortably and hygienically. Substance density(ppm)inside the space of the box unsatisfactory hygienical condition. Most of organic solvent(mainly toluene) came down to 0.5m in two minutes and 53sec. But personal protection for painter should be properly kept against flying this heavy organic solvent. longitudinally 27.1m in length is a cell unit of the whole length of bridge. Model XP-3l6A made in Japan is a main instrumentation adjusted to sense organic solvent especially toluene which can be measured up to 10,000ppm. Scenario analysis by computer program, safer release 2.0 has been performed first to estimate how the organic solvent will be propagated. And then actual test was done as a model. This has been measured for approximately five(5) minutes, with 30 sec interval. Actual measurement results showed much higher $10{\sim}20%$ than result analyzed by the computer program, meaning that this painting work can give worse effect to the worker who is painting inside the box girder of the bridge. The first meas urement level over the floor set up at 30cm height from the floor, because organic solvent was estimated to stay at the level. and then, they were measured at 1.0m, 1.5m level respectively, more.

• Composites Research
• /
• v.35 no.1
• /
• pp.47-51
• /
• 2022

In order to efficiently control the heat generation of electronic devices, many research has been conducted on thermally conductive composite materials. In this study, milled carbon fiber was dispersed in four solvent to investigate the relationship of carbon fiber alignment according to dispersion by solvents, and carbon fiberreinforced composite material(CFRP) was manufactured using vacuum filtration. To evaluate the arrangement of CFRP the arrangement of the prepared specimen was observed under an optical microscope, and thermal conductivity was measured by Laser Flash Analysis. The Through-plane thermal conductivity of CFRP using NMP and Ethanol was 10.79 W/mK and 10.57 W/mK respectively, which were improved by 218% and 209% compared to the In-plane thermal conductivity. The high viscosity of the solvent greatly affects the shear of the fluid, and it seemed to determine the alignment of the filler.

• The Journal of Internal Korean Medicine
• /
• v.1 no.1
• /
• pp.64-69
• /
• 1976

Kami Eui In Tang is being used as a treatment oral medicament on the appendicitis and peritonitis without surgical operation resulting good effect. The component of the medicament are as follow : Coix ma yuen, Paeonia moutan, Patrinia scabiosifolia, Rheum, Coreanum, Cory-dalis nakaii, Trichosanthes kirilowii, Lonicera japonica, Prunus persica, Tarxacum officinale, Author tried to make clear the ant inflammatory effect on rat paw which has become edema formation by carrageenin and detect the active ingredients by thin layer chromatography method. The material was extracted with three kind of solvent; distilled water, 50% ethyl alcohol, and ether which were immersed in material for 48 hours and concentrated to 10ml by evaporation of solvents. The result was as follow: 1. The anti-inflammatory effect of the sample material on the. edema formed at the rat paw was obviously clear. 2. Many spots of active ingredients were detected on the silica gel G plate spotted by ether extracted material than water one. 3. The good developing solvent was the mixture of $CHCl_3$ ; Acetone : Diethylamine (5:4:1).

• The Korea Journal of Herbology
• /
• v.26 no.4
• /
• pp.181-185
• /
• 2011

Objectives : The Zanthoxylum pericarpium has been used as oriental spicy seasoning and a medicinal plant from old times. This study was performed to determine the anti-oxidant efficacy of Zanthoxylum pericarpium extract and the anti-microbial effects. Methods : We got Zanthoxylum pericarpium extract using PSE (pressurized solvent extraction) method. The anti-microbial effect of Zanthoxylum pericarpium extract was assessed on Streptococcus mutans(S. mutans) and anti-oxidant effect of the extract was assessed by measuring DPPH radical scavenging activity and SOD like activity. Results : 1. Zanthoxylum pericarpium extract had high anti-microbial activity on S. mutans. 2. DPPH radical scavenging activity significantly increased in the Zanthoxylum pericarpium extract. 3. SOD like activity also significantly increased in the Zanthoxylum pericarpium extract. Conclusions : The PSE extract from Zanthoxylum pericarpium has good anti-microbial and anti-oxidant effects in a concentration-dependent manner.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.99-99
• /
• 2009

Two different micro-flows during the evaporation of ink droplets were achieved by engineering both surface tension gradient and compositional gradient across the ink droplet: (1) Coffee-ring generating flow resulting from the outward flow inside the ink droplet & (2) Marangoni flow leading to the circulation flow inside the ink droplet. The surface tension gradient and the compositional gradient in the ink droplets were tailored by mixing two different solvents with difference surface tension and boiling point. In order to create the coffee-ring generating flow (outward flow), a single-solvent system using N,N-dimethylformamide with nano-sized spherical alumina particles was formulated, Marangoni flow (circulation flow) was created in the ink droplets by combining N,N-dimethylformamide and fotmamide with the spherical alumina powders as a co-solvent ink system. We have investigated the effect of these two different flows on the formation of ceramic films by inkjet printing method, The packing density of the ceramic films printed with two different ink systems (single- and co-solvent systems) and their surface roughness were characterized. The dielectric properties of these inkjet-printed ceramic films such as dielectric constant and dissipation factor were also studied in order to evaluate the feasibility of their application to the electronic ceramic package substrate.

• Applied Chemistry for Engineering
• /
• v.7 no.1
• /
• pp.203-213
• /
• 1996

In physical and reactive extraction system using equilibrium extraction equipment, the effects of extractants, concentration of extractant, and solvent on the degree of extraction were investigated. The organic acids used were acrylic acid and metacrylic acid. Extractants were n-octylamine(OA), di-n-octylamine(DOA), tri-n-octylamine(TOA) and tri-octylmetyl ammonium chloride(TOMAC ; Aliquat 336). We found that the degree of extraction for reactive extraction was 2~9 times than that for physical extraction and that effect of extractants on the degree of extraction of organic acid was the order of OA

• Korean Journal of Organic Agriculture
• /
• v.20 no.3
• /
• pp.399-409
• /
• 2012

Effects of pretreatment and extraction conditions on total polyphenol yield from licorice root were investigated using statistical method. For pretreatment, heat treatment at $121^{\circ}C$ for 10 min was applied. Licorice root content in solvent (10, 20, and 30%) ethanol concentration (20, 40, and 60%) and reaction time (1, 2, and 3 h) were used as variables for extraction conditions. Two experiments, with heat treated and no treated licorice, were prepared with same experimental design. Box behnken design was employed and produced a total of 15 trials. Total polyphenol yield from licorice root was not affected by heat treatment. Among variables, licorice content in solvent showed most significant effect regardless of other variables (p<0.05). Finally, optimum conditions for the extraction of total polyphenol from licorice root was detected as following: 10% of licorice in solvent, 52% ethanol as solvent, 2 h of reaction time and non-heat treatment and the extraction yield from optimized condition was 17.6 mg/g licorice root.

• Bulletin of the Korean Chemical Society
• /
• v.23 no.8
• /
• pp.1089-1096
• /
• 2002

Solvolyses rate constants of trimethylacetyl chloride (2), isobutyryl chloride (3), diphenylacetyl chloride (4) and p-methoxyphenylacetyl chloride (5) in 2,2,2-trifluoroethanol (TFE)-water, 1,1,1,3,3,3-hexafluoro-2-propanol (HFIP)-water and TFE-et hanol solvent systems at $10^{\circ}C$ are determined by a conductimetric method. Kinetic solvent isotope effects (KSIE) are reported from additional kinetic data for methanolyses of various substituted acetylchlorides in methanol According to the results of those reactions analyzed in terms of rate-rate profiles,extended Grunwald-Winstein type correlations, application of a third order reaction model based a general base catalyzed (GBC) and KSIE values. Regardless of the kind of neighboring groups (CH3- or Ph-groups) of reaction center, for aqueous fluorinated alcohol systems, solvolyses of 2, 3, 4, and 5 were exposed to the reaction with the same mechanism (a loose SN2 type mechanism by electrophilic solvation) controlled by a similarity of solvation of the transition sate (TS). Whereas, for TFE-ethanol solvent systems, the reactivity depended on whether substituted acetyl chloride have aromatic rings (Ph-) or alkyl groups (CH3-); the solvations by the predominant stoichiometric effect (third order reaction mechanism by GBC and/or by push-pull type) for Ph- groups (4 and 5) and the same solvation effects as those shown in TFE-water solvent systems for CH3- groups (2 and 3) were exhibited Such phenomena can be interpreted as having relevance to the inductive effect ( $\sigmaI)$ of substituted groups; the plot of log (KSIE) vs. ${\sigma}I$ parameter give an acceptable the linear correlation with r = 0.970 (slope = 0.44 $\pm$ 0.06, n = 5).

• Ocean and Polar Research
• /
• v.41 no.2
• /
• pp.79-88
• /
• 2019

In this study, the inhibitory effect of Atriplex gmelinii C. A. Mey. against the activity of MMP-2 and MMP-9 secreted from phorbol-12-myristate-13-acetate (PMA)-stimulated HT-1080 cells was evaluated by gelatin zymography and enzyme-linked immunosorbent assay (ELISA), reverse transcription polymerase-chain reaction (RT-PCR), and Western blot assay. Specimens of the halophyte A. gmelinii were extracted twice for 24 hr with methylene chloride ($CH_2Cl_2$), and then twice with methanol (MeOH), in turn. Each extract significantly inhibited the enzymatic activities in gelatin zymography and MMP ELISA kit, and expression of MMP-2 and 9 in mRNA and protein levels. Two crude extracts were combined and then the combined crude extracts were fractionated into n-hexane, 85% aqueous methanol (85% aq.MeOH), n-butanol (n-BuOH), and water ($H_2O$) fractions, according to solvent polarity. Among solvent-partitioned fractions, the 85% aq.MeOH fraction showed the strongest inhibitory effect against MMP-2 and -9 in gelatin zymography and MMP ELISA kit. In RT-PCR, all solvent-partitioned fractions significantly suppressed mRNA expression of MMP-2 and -9. On the other hand, in Western blot assay, all solvent-partitioned fractions except $H_2O$ significantly reduced expression levels of protein. HT 1080 cell migration was most significantly inhibited by the n-BuOH fraction followed by the 85% aq.MeOH and $H_2O$ fractions. These results suggest that A. gmelinii could be used as a potential source to inhibit tumor cell metastasis.