• Journal of Korean Biological Nursing Science
• /
• v.17 no.2
• /
• pp.150-158
• /
• 2015

Purpose: This study aimed to evaluate the effects of gargling with S-solution and gargling with A-solution on salivary pH, coated tongue, and dental plaque index in preschool children. Methods: Non-equivalent control group pretest-posttest design was used to select the participants. 99 preschool children were divided into three groups. Dependent variables were recorded at baseline, 30 minutes, and 7 days after the first treatment was given. The data were analyzed using $X^2$-test, ANOVA, and repeated measures of ANOVA. Results: There were no significant differences in dependent variables in pre-test. However, the salivary pH in the S-solution group had significantly increased after 30 minutes (p<.05) and then again 7 days (p<.01) after the first treatment. Also, the S-solution and A-solution groups had greater decrease in dental plaque index after 30 minutes and again 7 days after the first treatment (p<.001) than the control group. With respect to coated tongue, there were no significant differences among the three groups. Conclusion: The results of this study indicate that essential oil gargling after brushing is helpful in improving oral health due to auxiliary oral hygiene effects with natural products. Specifically, gargling with S-solution is more effective than A-solution on oral health in preschool children by neutralizing salivary pH and reducing dental plaque index.

• Journal of Sericultural and Entomological Science
• /
• v.31 no.2
• /
• pp.121-126
• /
• 1989

Two kinds of solution for the measurement of solubilities of Sericin are prepared as followings at temperature 90 deg. C. One has the total carbonate concentration as 0, 50, 100mg CO2/l prepared with non-carbonate distilled water, sodium hydrogen carbonate and 0.1N HCI and NaOH, the other has total hardness, that is, calcium hardness or magnesium hardness as 0, 20, 50, 100mg CaCO2/l respectively prepared with non-carbonate distilled water, calcium carbonate and magnesium oxide. Solubilities of Cocoon layer Sericin at above solution gives following results ; 1. pH shows little effect on the solubility of Sericin at the non-carbonate solution but at the carbonate solution pH shows a sensitive effect on the solubility of Sericin. These means that pH controls the concentration of H2CO3, HCO3-and CO32- which prevent and promote the solution of Sericin. 2. After the cocoon layer treatment at the solution, the initial pH of 4.0, 7.0, 9.0 of the solution changed to 6.0-6.5 at the lower total carbonate solution. However in the higher total carbonate solution pH did not changed very much. This may be explained by the buffer action of carbonate. 3. The effect of the hardness on the solubility of Sericin was not found in the non-carbonate solution with the standard hardness after treatment of cocoon layer.

• Journal of the Microelectronics and Packaging Society
• /
• v.27 no.3
• /
• pp.29-34
• /
• 2020

The behavior of brittle fracture of electroless nickel immersion gold (ENIG) /Sn-3.0wt.%Ag-0.5wt.%Cu (SAC305) solder joints was evaluated. The pH of the electroless nickel plating solution for ENIG surface treatment was changed from 4.0 to 5.5. As the pH of the Ni plating solution increased, pin hole in the Ni-P layer increased. The thickness of the interfacial intermetallic compound (IMC) of the solder joint increased with pH of Ni plating solution. The high speed shear strength of the SAC305 solder joint on ENIG surface finish decreased with the pH of the Ni plating solution. In addition, the brittle fracture rate of the solder joint was the highest when the pH of the Ni plating solution was 5.

• Journal of Sericultural and Entomological Science
• /
• v.41 no.2
• /
• pp.116-121
• /
• 1999

This study was aimed to explain the essence of Hydroxylammonium hydrochloride(H.A.) effect on degummed silk fiber increasing the colour sites due to oxime generating reaction. H.A. in aqueous solution caues to increase the amount of [H+] and reduce pH values as the concentration of H.A. increases. The rate of [H+] absorption of silk fiker in acidic solution differs on the basic of solution pH and shows a specific uptake in each pH, the lower the pH of solution, the higher the amount [H+] absorption. The pH of solution after treating of silk fiber in H.A. and HCl, showed more remaining [H+] in H.A. solution due to [H+] releasing under the procedure of oxime production. Also it was revealed that in higher concentration of H.A. the reaction for oxime fixation in silk fiber carried out stonger and as a result the bigger gap with acid uptake curve appeared. FT-IR analysis of silk fiber treated with H.A. revealed the creating of intermolecular H-bond at the 2,981-2.930 cm-1, which was not appeared for nontraeted silk fibers and shows H-bond between N-OH group in oue chain and C=) group in another chain of silk protein. Colourimetry of dyed silk fiber after H.A. tratment showed that the silk fiber treated with the high concentration of H.A. compare to low concentration, absorbed more dyeing molecules and so Showed less percontage of Whiteness.

• The Korean Journal of Physiology and Pharmacology
• /
• v.21 no.2
• /
• pp.215-223
• /
• 2017

The effects of acidic pH on several voltage-dependent ion channels, such as voltage-dependent $K^+$ and $Ca^{2+}$ channels, and hyperpolarization-gated and cyclic nucleotide-activated cation (HCN) channels, were examined using a whole-cell patch clamp technique on mechanically isolated rat mesencephalic trigeminal nucleus neurons. The application of a pH 6.5 solution had no effect on the peak amplitude of voltage-dependent $K^+$currents. A pH 6.0 solution slightly, but significantly inhibited the peak amplitude of voltage-dependent $K^+$ currents. The pH 6.0 also shifted both the current-voltage and conductance-voltage relationships to the depolarization range. The application of a pH 6.5 solution scarcely affected the peak amplitude of membrane currents mediated by HCN channels, which were profoundly inhibited by the general HCN channel blocker $Cs^+$ (1 mM). However, the pH 6.0 solution slightly, but significantly inhibited the peak amplitude of HCN-mediated currents. Although the pH 6.0 solution showed complex modulation of the current-voltage and conductance-voltage relationships, the midpoint voltages for the activation of HCN channels were not changed by acidic pH. On the other hand, voltage-dependent $Ca^{2+}$ channels were significantly inhibited by an acidic pH. The application of an acidic pH solution significantly shifted the current-voltage and conductance-voltage relationships to the depolarization range. The modulation of several voltage-dependent ion channels by an acidic pH might affect the excitability of mesencephalic trigeminal nucleus neurons, and thus physiological functions mediated by the mesencephalic trigeminal nucleus could be affected in acidic pH conditions.

• Journal of the Korean Chemical Society
• /
• v.8 no.4
• /
• pp.147-152
• /
• 1964

Vanadium (IV) and vanadium (V) cupferrate compositions in benzene phase were determined by molar ratio method and continuous variation method spectrophotometrically at 450$m{\mu}$ or 445$m{\mu}$ of wavelength. Compositions of vanadium (IV) cupferrates, V(IV)/Cupf, varied from 1/2 to 1/4 with the acidity of solution from which the complexes were precipitated. The complexes precipitated were vanadium(IV) cupferrate($VCupf_4$) in solution with lower pH than 1.0, and vanadyl(IV) cupferrate ($VOCupf_2$) in solution with 1.8-4.3 of pH. It was considered, however, that the complexes in solution with 1.3-1.7 of pH might be hydrogen vanadyl(IV) cupferrate ($HVOCupf_3$) or nearly equimolar mixture of $VCupf_4\;and\;VOCupf_2$ complexes. Vanadium (V) cupferrate composition did not vary with the acidity of solution from which the complexes were precipitated. In solution with lower pH than 1.8, the complex precipitated was hydrogen vanadyl (V) cupferrate, $HVO_2Cupf_2$.

• Journal of the Korean Ceramic Society
• /
• v.25 no.2
• /
• pp.136-142
• /
• 1988

β-Al2O3, which is used for solid electrolyte membrances in sodium-sulfur batteries, was prepared by sol-gel process. Sodium-n-propoxide NaOC3H7 and aluminum-isopropoxide Al(OC3H7)3 were hydrolyzated in the solution at pH 3, pH 7, pH 9 and pH 11, respectively. The sol-gel processed samples were calcined at several temperature steps, respectively and analysed by thermal analyser(DT-TGA), infrared spectrum analyser and X-ray diffraction analyser. The gelling rate of solution at pH 7 was much higher than that of the solution at pH 3. Thermal exchanging behavior of the gels at pH 3 were similar to Na2O·Al2O3·6H2O and, above pH 7, were similar to Na2O·Al2O3·3H2O. When samples' composition ratio was 9.13 : 90.87 [NaOC3H7:Al(OC3H7)3] at pH 7, β-Al2O3 was formed at 1100℃.

• Journal of Fashion Business
• /
• v.22 no.1
• /
• pp.124-134
• /
• 2018

This study examined the dyeing characteristics and spectrum of cotton and silk by using dyeing solution extracted from aronia. The value $L^{\ast}$ which indicates the brightness of cotton regardless of mordant increases with increasing pH from pH 3.5 to pH 10.5. The color difference value(${\Delta}E$) of the cotton was generally high in pH 3.5 regardless of mordant existence. The silk showed the highest ${\Delta}E$ value in pH 3.5 dye solution as cotton did. On the other hand, the silk with mordant dyed showed the highest ${\Delta}E$ value in pH 7. Silk fabrics dyed with Aronia solution turns out red in pH 3.5, blue in pH 7 and yellow in pH 10.5. This is because of the amino acid, one of the silk ingredients, combines with a part of anthocyanin to show blue. As the result of the spectrum measurement, the maximum absorption wavelength of Aronia solution was increased in the order of pH 10.5, pH 3.5 and pH 7, regardless of extraction temperature and mordant. The measurement results of color fastness to washing and color fastness to light are generally low. Therefore, there is a need for further study to improve color fatness in the future.

• Korean Journal of Animal Reproduction
• /
• v.15 no.1
• /
• pp.7-13
• /
• 1991

This study was carried out to investigate the effects of pH of sperm-washing solution, sperm-washing frequency and individual bull on concentration of hydrogen ion in sperm-washed solution and sperm acrosome reaction. The results obtained were as follow. 1. When bovine sperm was washed at 4 times with SHP solution and incubated, the difference of light absorbance between sperm-washing and sperm-washed solution(${\Delta}$Ao-${\Delta}$At) was higher in 2nd sperm-washed solution than that in the other washed solutions. 2. When sperm was thrice washed with SHP solutions of pH 5.99, 6.38, 6.78, 7.10, 7.40, 7.69, 8.15, 8.45, and 8.83, ${\Delta}$Ao-${\Delta}$At was significantly increased at pH7.69 to 8.83, and ${\Delta}$Ao-${\Delta}$At in 1st sperm washed solution was significantly higher than that in 2nd and 3rd sperm washed solution. 3. When sperm of Holstein, KNC and Hereford was thrice washed with SHP solutions of pH 5.99, 6.38, 6.78, 7.10, 7.40, 7.69, 8.15, 8.45, and 8.83, Holstein showed higher ${\Delta}$Ao-${\Delta}$At of sperm Washed solution than KNC and Hereford, and ${\Delta}$Ao-${\Delta}$At in sperm washed solution was significantly increased at 7.69 for Holstein and at 8.15 for KNC and Hereford, respectively. 4. When sperm was thrice with SHP solution of pH 6.8, 7.1 and 7.4, and then incubated in mTALP of pH 7.4 for 15 minutes, in 1st and 2nd sperm washing ${\Delta}$Ao-${\Delta}$At of sperm washed solution was significantly higher at pH 7.1 and 7.4 than at pH 6.8, and the sperm acrosome reaction of pH 6.8, 7.1 and 7.4 was 49.1, 68.8 and 72.9%, respectively. The sperm acrosome reaction of pH 7.1 and 7.4 was higher than that of pH 6.8.

• Nuclear Engineering and Technology
• /
• v.45 no.1
• /
• pp.107-114
• /
• 2013

It is required that the pH of the sump solution should be above 7.0 to retain iodine in a liquid phase and be within the material compatibility constraints under LOCA condition of PWR. The pH of the sump solution can be determined by conventional chemical equilibrium constants or by the minimization of Gibbs free energy. The latter method developed as a computer code called SOLGASMIX-PV is more convenient than the former since various chemical components can be easily treated under LOCA conditions. In this study, SOLGASMIX-PV code was modified to accommodate the acidic and basic materials produced by radiolysis reactions and to calculate the pH of the sump solution. When the computed pH was compared with measured by the ORNL experiment to verify the reliability of the modified code, the error between two values was within 0.3 pH. Finally, two cases of calculation were performed for the SKN 3&4 and UCN 1&2. As results, pH of the sump solution for the SKN 3&4 was between 7.02 and 7.45, and for the UCN 1&2 plant between 8.07 and 9.41. Furthermore, it was found that the radiolysis reactions have insignificant effects on pH because the relative concentrations of HCl, $HNO_3$, and Cs are very low.