• 한국연소학회지
• /
• 제13권1호
• /
• pp.17-22
• /
• 2008

A partly implicit/quasi-explicit method is introduced for the solution of detailed chemical kinetics with stiff source terms based on the standard fourth-order Runge-Kutta scheme. Present method solves implicitly only the stiff reaction rate equations, whereas the others explicitly. The stiff equations are selected based on the survey of the chemical Jaconian matrix and its Eigenvalues. As an application of the present method constant pressure combustion was analyzed by a detailed mechanism of hydrogen-air combustion with NOx chemistry. The sensitivity analysis reveals that only the 4 species in NOx chemistry has strong stiffness and should be solved implicitly among the 13 species. The implicit solution of the 4 species successfully predicts the entire process with same accuracy and efficiency at half the price.

• 한국세라믹학회지
• /
• 제35권10호
• /
• pp.1078-1084
• /
• 1998

금속 질산염과 urea를 사용하여 연소합성법에 의해 LaCrO3 분말을 제조하고, 용액의 pH를 HNO3와 NH4OH로 조절한 후, 용매의 가열방법에 따른 연소 생성물인 LaCrO3의 형상을 고찰하였다. 연소생성물의 수율은 용액의 pH에 의해 크게 좌우되었다. 용액의 pH가 0.7~4 사이에서는 90% 이상의 수율이 얻어졌으나, 5 이상 또는 0.5 이하의 pH에서는 수율이 크게 감소하였다. 한편, 연소생성물의 형상은 용액의 pH에 무관하였고 용액의 가열방법에 좌우되었다. 용액을 저항가열법으로 가열하여 연소반응시킨 경우의 분말은 미세한 일차입자들이 2차원적으로 연결된 응집체를 형성하고 있었으나, 마이크로파를 인가하여 가열한 경우에는 용액의 pH에 관계없이 미세한 LaCrO3 분말이 얻어졌다. BET 분석 결과, 마이크로파 가열에 의해 얻어진 입자의 비표면적은 25~32m2/g으로 저항가열법으로 가열한 경우의 10-14m2/g에 비해 더 큰 값을 보였다. 이러한 결과는 마이크로파에 의한 연소반응물의 균일한 가열이 연소생성물의 2차원적인 강항 응집체 형성을 억제할 수 있음을 보여 주었다.

• 한국재료학회지
• /
• 제25권9호
• /
• pp.492-496
• /
• 2015

Hydroxyapatite (HA), which is an important calcium phosphate mineral, has been applied in orthopedics, dentistry, and many other fields depending upon its morphology. HA can be synthesized with different morphologies through controlling the synthesis method and several parameters. Here, we synthesize various morphologies of HA using two simple methods: hydrothermal combustion and solution combustion. The phase purity of the synthesized HA is confirmed using X-ray diffractometry. It demonstrates that pure phased hydroxyapatite can be synthesized using both methods. The morphology of the synthesized powder is examined using scanning electron microscopy. The effects of pH and temperature on the final powder are also investigated. At $140^{\circ}C$, using the hydrothermal method, nano-micro HA rods with a hexagonal crystal structure can be synthesized, whereas using solution combustion method at $600^{\circ}C$, a dense cubic morphology can be synthesized, which exhibits monoclinic crystal structures.

• 약학회지
• /
• 제13권2_3호
• /
• pp.84-87
• /
• 1969

Microanalysis of organic sulfur compounds by means of combining thin layer chromatography and oxygen combustion flask method was attempted. The following procedure was found to be very simple and to give accurate results. The mixture of sulfa drugs was separated with T.L.C., and it was burned in a flask filled with oxygen, and the gas formed was absorbed in a dilute solution of sodium hydroxide. The solution was neuralized with hydrochloric acid and heated in a water bath. The sulfate ion formed was then treated with barium chromate solution and its absorbancy at 370 m.mu. was measured.

• 분석과학
• /
• 제23권6호
• /
• pp.615-618
• /
• 2010

An oxygen bomb combustion procedure were studied for determination of heavy metal in polymer materials such as polyvinyl chloride and polypropylene by ICP-AES. This method is proposed as a rapid and simple sample preparation for decomposition of polymer containing certified contents of the analytes by teflon coated oxygen bomb combustion using different absorbing solution. The recoveries of metal were found to be 30~102% from absorbed solution by ICP-AES method using polypropylene certified reference material(PP CRM-As, Ba, Cd, Hg, Pb, Zn). The recoveries of metal using PVC CRM(Cd, Hg, Pb) was found to be 45 ~101% with same procedures.

• The Korean Journal of Ceramics
• /
• 제6권2호
• /
• pp.172-176
• /
• 2000

Solid solutions of Ti$_{0.5}$Zr$_{0.5}$B$_2$were successfully synthesized and densified simultaneously from elemental reactants by the use of a field-activated, pressure-assisted synthesis method. The method involves the application of an electric current and mechanical pressure across reactant compacts to achieve combustion synthesis. Dense solid solutions with relative densities of up to 99% were produced and characterized by XRD, SEM, and EPMA methods. With a maximum measured temperature of 145$0^{\circ}C$ under a load of 86 MPa for 30 min, the desired dense solid solution wad synthesized.

• 한국세라믹학회지
• /
• 제39권1호
• /
• pp.74-78
• /
• 2002

본 연구에서는 전구체 용액의 산화환원 발열반응을 이용하여 다성분계 산화물을 제조할 수 있는 용액연소합성법을 이용하여 페로브스카이트 구조 PZT 세라믹스를 합성하고자 하였다. 산화제/환원제 전구체 혼합물의 열분석(DTA/TG) 결과 산화제와 환원제의 열분해 거동의 차이로 인해 214$^{\circ}C$와 35$0^{\circ}C$에서 발열 피크가 나타났다. PZT세라믹스 합성을 위한 승온 과정에서는 37$0^{\circ}C$에서 연소반응이 일어났으나, 페로브스카이트로의 상전이는 일어나지 않았다. 용액연소과정 중 산화제와 연료의 열분해 거동을 고려하여 $600^{\circ}C$에서 제조한 생성물은 결정크기가 50nm인 정방정의 단일상으로 이루어진 PZT세라믹스이었다. 격자상수를 측정한 결과 a는 3.997$\pm$0.001 $\AA$이었으며, c는 4.147$\pm$0.001 $\AA$으로 나타났다.

• 한국재료학회지
• /
• 제11권9호
• /
• pp.797-801
• /
• 2001

In this study, the solution combustion method was employed to synthesize stoichiometric mullite, and hence the attrition process was employed to prepare ultrafine mullite particles with nano size. The thermal decomposition behavior and partial pressure of equilibrium species of both oxidizer and fuel were considered during solution combustion process. The synthesized product was mullite phase with 40 nm crystalline size, and the alumina contents of the product by TEM/EDS quantity analysis was 3.12$\pm$04 mole. The result showed that the synthesized mullite was almost close to the it's stoichiometric composition. For attrition process, the dispersion behavior of the mullite suspension was controlled and was comminuted with the condition of 800 rpm for 4 hours using 0.3 mm zirconia ball media. As a result of comminution, the mean particle size was 80 nm.

• 한국연소학회지
• /
• 제3권1호
• /
• pp.21-29
• /
• 1998

Mathematical modeling of combustion characteristics in HVOF thermal spray processes was carried out on the basis of equilibrium chemistry. The main objective of this work was the development of a computation code which allows to determine chemical composition of combustion products, adiabatic flame temperature, thermodynamic and transport properties. The free energy minimization method was employed with the descent Newton-Raphson technique for numerical solution of systems of nonlinear thermochemical equations. Adiabatic flame temperature was calculated by using a Newton#s iterative method incorporating the computation module of chemical composition. The performance of this code was verified by comparing computational results with data obtained by ChemKin code and in the literature. Comparisons between the calculated and measured flame temperatures showed a deviation less than 2%. It was observed that adiabatic flame temperature augments with increase in combustion pressure; the influence was significant in the region of low pressure but becomes weaker and weaker with increase in pressure. Relationships of adiabatic flame temperature, dissociation ratio and combustion pressure were also analyzed.

• 한국세라믹학회지
• /
• 제53권1호
• /
• pp.122-127
• /
• 2016

Tin oxide ($SnO_2$) nanoparticles have been synthesized by solution combustion method using citric acid as a fuel. The oxide to fuel ratio has been varied to obtain ultrafine nanoparticles with better surface area; such particles will be useful in many applications. With this synthesis method, spherical particles are formed having a particle size in the range of 11-30 nm and BET surface area of ~ $24m^2/g$. The degree of agglomeration of $SnO_2$ nanoparticles has been calculated.