• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.6 no.2
• /
• pp.174-185
• /
• 1994

This paper presents a modal solution of linear three-dimensional hydrodynamic equations using similarity transform technique. The solution over the vertical space domain is obtained using the Galerkin method with linear shape funtions (Galerkin-FEM model). Application of similarity transform to resulting tri-diagonal matrix equations gives rise 掠 a set of uncoupled partial differential equations of which the unknowns are coefficients of mode shape vectors. The proposed method.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.2
• /
• pp.423-432
• /
• 2014

Non-dominated Sorting Genetic Algorithm-II (NSGA-II) is applied for solving Combined Economic Emission Dispatch (CEED) problem with valve-point loading of thermal generators. This CEED problem with valve-point loading is a nonlinear, constrained multi-objective optimization problem, with power balance and generator capacity constraints. The valve-point loading introduce ripples in the input-output characteristics of generating units and make the CEED problem as a nonsmooth optimization problem. To validate its effectiveness of NSGA-II, two benchmark test systems, IEEE 30-bus and IEEE 118-bus systems are considered. To compare the Pareto-front obtained using NSGA-II, reference Pareto-front is generated using multiple runs of Real Coded Genetic Algorithm (RCGA) with weighted sum of objectives. Comparison with other optimization techniques showed the superiority of the NSGA-II approach and confirmed its potential for solving the CEED problem. Numerical results show that NSGA-II algorithm can provide Pareto-front in a single run with good diversity and convergence. An approach based on Technique for Ordering Preferences by Similarity to Ideal Solution (TOPSIS) is applied on non-dominated solutions obtained to determine Best Compromise Solution (BCS).

• Restorative Dentistry and Endodontics
• /
• v.7 no.1
• /
• pp.131-138
• /
• 1981

The purpose of this study was to evaluate the marginal leakage of composite resin. Preparing 144 class V cavities on freshly extracted noncarious teeth, composite resins were prepared and inserted by one dentist according to the manufacturer's instructions. The experiments were performed in two different groups; In group I; Class V cavities with $90^{\circ}$ cavosurface angle, In group II; Class V cavities with $135^{\circ}$ cavosurface angle. And each group was divided 2 subgroups; In control group; composite resin restoraions without acid etch technique. In experimental group; composite resin restorations with acid etch technique. All specimens were immersed in 0.05% crystal violet solution. Before examination, the restored teeth were subjected to thermal stress. The specimens were sectioned occlusogingivally through the center of the restorations with a diamond disk. The sections were examined under a reflected light microscope at 1 day, 7 days and 30 days after immersing the specimens in dye solution. The results were as follows; 1. Control group of group I and group II showed marginal leakage. 2. The degree of marginal leakage in experimental group was greater reduced than control group. 3. In control group, the degree of marginal leakage in group I was greater than group II. 4. In experimental group, there is not statistical differences of the degree of marginal leakage between group I & group II.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.294-294
• /
• 2010

CdS는 $CuInSe_2$계, CdTe계 이종접합 태양전지의 junction partner로 많이 이용되어 왔다. CdS는 전극으로 쓰일 뿐만 아니라 빛을 투과시키는 창문층으로 사용되어 높은 변환 효율을 나타낸다. 이종접합 태양전지에서 창문층은 가시광 영역에서 광투과율이 높고, 전기적으로 비저항이 낮아야 에너지 손실 없이 태양광을 광흡수층까지 투과시킬 수 있다. CdS 박막은 CBD법(solution growth technique), 진공증착법(vacuum evaporation), 스퍼터법(sputtering), 스프레이 열분해법(spray pyrolysis), 전착법(electrodeposition)에 의해 제조되고, 그 중 용액성장법(solution growth technique)이라고도 불리는 CBD법(chemical bath deposition)을 이용하여 CdS 박막을 제조하였다. CBD법은 다른 방법에 비해 제조 과정이 비교적 간단할 뿐만 아니라 제조 단가가 저렴하고, 넓은 면적의 박막 제조가 가능하며 재현성도 우수하다는 장점이 있다. CdS 박막을 제조하기 위한 cadmuim 이온공급원으로는 $CdSO_4$를 사용하였고 sulfur 이온공급원으로는 $SC(NH_2)_2$를 사용하였다. CBD법에서 박막의 물성에 영향을 미칠 수 있는 요인인 sulfur 이온공급원과 cadmium 이온공급원의 비, 용액의 온도, pH를 변화시켜 CdS 박막을 제조하였다. 각각의 조건에 의해 제조된 CdS의 박막의 두께는 Tencor P-1을 이용하여 측정되었고, UV-Visible spectrometer를 이용하여 파장에 따른 광투과율을 측정하였다. CdS 박막의 결정 구조를 조사하기 위해 X선 회절분석(XRD ; X-ray diffraction)을 하였고, AFM(Atomic Force Microscope)으로 표면 특성을 관찰하였다.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.12 no.19
• /
• pp.25-30
• /
• 1989

This study is concerned with a job sequencing method using the concept of sampling technique. This sampling technique has never been applied to develop the scheduling algorithms. The most job sequencing algorithms have been developed to determine the best or good solution under the special conditions. Thus, it is not only very difficult, but also taken too much time to develop the appropriate job schedules that satisfy the complex work conditions. The application areas of these algorithms are also very narrow. Under these circumstances it is very desirable to develop a simple job sequencing method which can produce the good solution with the short tine period under any complex work conditions. It is called a sampling job sequencing method in this study. This study is to examine the selection of the good job sequence of 1%-5% upper group by the sampling method. The result shows that there is the set of 0.5%-5% job sequence group which has to same amount of performance measure with the optimal job sequence in the case of experiment of 2/n/F/F max. This indicates that the sampling job sequencing method is a useful job sequencing method to find the optimal or good job sequence with a little effort and time consuming. The results of ANOVA show that the two factors, number of jobs and the range of processing time are the significant factors for determining the job sequence at $\alpha$=0.01. This study is extended to 3 machines to machines job shop problems further.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.4
• /
• pp.177-182
• /
• 2021

Generally, the linear programming (LP) with O(n⁴) time complexity is applied to mixture optimization problem that can be produce the given ingredients grade product with minimum cost from mixture of various raw materials. This paper suggests heuristic algorithm with O(n log n) time complexity to obtain the solution of this problem. The proposed algorithm meets the content range of the components required by the alloy steel plate while obtaining the minimum raw material cost, decides the quantity of raw material that is satisfied with ingredients grade for ascending order of unit cost. Although the proposed algorithm applies simple decision technique with O(n log n) time complexity, it can be obtains same solution as or more than optimization technique of linear programing.

• Horticultural Science & Technology
• /
• v.30 no.6
• /
• pp.686-693
• /
• 2012

To develop a technique for mass-propagation of virus-free sweet potato [Ipomoea batatas (L.) Lam.] plant using nutrient film technique (NFT), the growth characteristics of 4 cultivars as affected by nutrient solution composition and cutting size were investigated. 72 cells (35 mL/cell) plug trays filled with vermiculite and perlite (1:1, v/v) were used. Vine length, fresh and dry weights of virus-free plants were the greatest in the nutrient solution recommended by National Horticultural Research Station in Japan, followed by that recommended by National Institute of Horticultural & Herbal Science in Korea, and Yamazaki's nutrient solution for lettuce. The growth of uppershoot cuttings was the best among 4 subsections of cutting. Vine length, and fresh and dry weights increased in the longer cutting treatments, and were better in 'Shinzami' and 'Yeonhwangmi' than those in 'Mannami' and 'Shincheonmi'. Vine diameter and length of the longest root were not significantly affected by the cutting size and cutting source. The growth characteristics of the single node cutting were not significantly different from those in 2-node cutting. The efficiency of rapid mass-propagation could be promoted with single node cuttings and uppershoot cuttings grown in NFT system.

• Journal of Sensor Science and Technology
• /
• v.1 no.2
• /
• pp.183-194
• /
• 1992

Some silicon micromechanical structures useful in sensors and actuators have been fabricated by electropolishing or porous silicon formation technique by anodic reaction in HF solution. The microstructures were lightly doped single crystal silicon and the formation was isotropic independent of crystal directions. Porous silicon layer(PSL) was formed selectively in $n^{+}$ region of $n^{+}/n$ silicon structure by anodic reaction in concentrated HF(20-48%) solution. Characteristics of the formed PSL were investigated along with change of the reaction voltage, HF concentration and the reaction time. PSL was formed only in $n^{+}$ region. The porosity of the PSL was decreased with the increase of HF concentration and independent of reaction voltage. For the case of $n/n^{+}/n$ structures, the etched surface of silicon was fairly smooth and a cusp was not found. The thickness of the microstructures was the same as that of the epitaxial n-Si layer and good uniformity. We have fabricated acceleration sensors by anodic reaction in HF solution(5 wt%) and planar technology. The process was compatible with conventional It fabrication technique. Various micromechanical structures, such as rotors of motor, gears and linear actuator, were also fabricated by the technique and examined by SEM photographs.

• Journal of Information Processing Systems
• /
• v.7 no.2
• /
• pp.363-384
• /
• 2011

As the complexity of software is increasing, generating an effective test data has become a necessity. This necessity has increased the demand for techniques that can generate test data effectively. This paper proposes a test data generation technique based on adequacy based testing criteria. Adequacy based testing criteria uses the concept of mutation analysis to check the adequacy of test data. In general, mutation analysis is applied after the test data is generated. But, in this work, we propose a technique that applies mutation analysis at the time of test data generation only, rather than applying it after the test data has been generated. This saves significant amount of time (required to generate adequate test cases) as compared to the latter case as the total time in the latter case is the sum of the time to generate test data and the time to apply mutation analysis to the generated test data. We also use genetic algorithms that explore the complete domain of the program to provide near-global optimum solution. In this paper, we first define and explain the proposed technique. Then we validate the proposed technique using ten real time programs. The proposed technique is compared with path testing technique (that use reliability based testing criteria) for these ten programs. The results show that the adequacy based proposed technique is better than the reliability based path testing technique and there is a significant reduce in number of generated test cases and time taken to generate test cases.

• Horticultural Science & Technology
• /
• v.35 no.4
• /
• pp.456-464
• /
• 2017

We examined the effect of nutrient solution concentration in the second half of growing period on the pre- and postharvest characteristics of two leaf lettuce cultivars, 'Geokchima' and 'Cheongchima'. Plants were grown hydroponically in a deep flow technique (DFT) system at different concentrations of National Horticulture Research Institute hydroponic nutrient solution: 1/2 strength (S), 1S, 2S, and 4S. Lettuce leaf growth, number of leaves, and shoot fresh weight of both cultivars were greatest in plants grown in the 1S treatment. Compared to other treatments, pigment and nutrient ion contents were greater in the 4S treatment. Growth of lettuce was greatest in the 1S treatment, and decreased at higher or lower concentrations of nutrient solution. However, postharvest characteristics such as fresh weight loss, leaf chlorophyll level, and external appearance were better in both cultivars when grown in 2S solution. Variations in weight loss and SPAD values were smallest in the 2S treatment. These results show that the optimal nutrient concentration for growth does not necessarily provide the optimal postharvest storability.