• 한국지형공간정보학회:학술대회논문집
• /
• 2002.11a
• /
• pp.73-80
• /
• 2002

RFM is believed to be universally applicable to any type of the sensor. Most of researches carried out lately are concentrated on terrain-independent method, but the researches about approvement of accuracy by way of terrain-dependent method are required to increase a practical use of satellite imagery in nonprofessional groups. This research focused on a means to improve RFM solution, a matching technique, and a generation of DEM through a correlation analysis, with terrain-dependent solution. The result shows that accuracy problem which is caused by over-parameterization on RFCs was removed through correlation analysis, and it was possible to generate a accurate DEM with terrain-dependent solution. And also, the application of RFM with different satellite images show sensor independent characteristics of RFM

• The Research Journal of the Costume Culture
• /
• v.16 no.5
• /
• pp.785-794
• /
• 2008

This study systematically analyzes the specific characteristics of clothes that each person owned by applying morphological analysis, one of the creative conception technique and suggests a way that person owned on clothes through better fashion coordination according to personal style change. The result of this study is like below. Firstly, we could draw a successful fashion coordination technique by compounding solutions classified by each important variable totally through morphological analysis. Second, we suggested a personal style analysis technique that is systematic and visual through morphological analysis. Third, we could draw a various fashion coordination technique by mixture of partial solution for important variables in short time, and concluded that it is helpful to idea quest to emphasize personal individuality in shopping. Finally a study on program development that can do expansion of fashion coordination efficiently in submitting a morphological analysis table should continue.

• Wind and Structures
• /
• v.9 no.6
• /
• pp.441-455
• /
• 2006

A more applicable optimization model for extracting flutter derivatives of bridge decks is presented, which is suitable for time-varying weights for fitting errors and different lengths of vertical bending and torsional free vibration data. A stochastic search technique for searching the optimal solution of optimization problem is developed, which is more convenient in understanding and programming than the alternate iteration technique, and testified to be a valid and efficient method using two numerical examples. On the basis of the section model test of Sutong Bridge deck, the flutter derivatives are extracted by the stochastic search technique, and compared with the identification results using the modified least-square method. The Empirical Mode Decomposition method is employed to eliminate noise, trends and zero excursion of the collected free vibration data of vertical bending and torsional motion, by which the identification precision of flutter derivatives is improved.

• Proceedings of the KSME Conference
• /
• 2001.06e
• /
• pp.100-106
• /
• 2001

The size distributions of electrospray droplets from the Taylor cone in cone-jet mode are directly measured by using a freezing method and a transmission electron microscope (TEM) image processing technique. These results are compared with the data obtained by an aerodynamic size spectrometer (TSI Aerosizer DSP). The use of glycerol seeded with NaI and a freezing method make it possible to sample droplets with their original sizes preserved. Since pictures of droplets are taken with TEM with very low vapor pressure of the solution, evaporation is suppressed by freezing. For liquid flow rates below 1 nl/sec, the measured droplet diameters by the TEM image processing technique and the aerosizer are in the range of 0.25 to $0.32{\mu}m$ and 0.30 to $0.40{\mu}m$, respectively. Comparing the TEM data with the aerosizer measurements, it has been revealed that the TEM image processing technique can afford more accurate values of droplet size distributions in the submicron range of 0.1 to $0.4{\mu}m$.

• The KIPS Transactions:PartC
• /
• v.12C no.5 s.101
• /
• pp.633-642
• /
• 2005

Ubiquitous computing system is about networked processors, which is constructed with one or more computers interconnected by the networks. However, traditional security solution lacks a Proactive maintenance technique because of its focusing on developing the qualitative detection and countermeasure after attack. Thus, in this paper, we propose a quantitative assessment modeling technique, by which the general infrastructure can be improved and the attacks on a specific infrastructure be detected and protected. First of all, we develop the definition of survivality and modeling technique for quantitative assessment modeling with the static information on the system random information, and attack-type modeling. in addition, the survivality analysis on TCP-SYN attack and code-Red worm attack is performed for validating the proposed technique.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.9
• /
• pp.968-977
• /
• 2008

In this paper, an analysis of TE-wave scattering from transversal-shifted tandem slits using fourier transform analysis and Wiener-Hopf technique are derived and the electrical performances have been compared with a commercially availabel software. In Fourier transform analysis, it is shown that a fast-convergent series solution can be obtained when the distance between the slits is very narrow, while in Wiener-Hopf technique, it is found that the highly-accurate approximation can be obtained when the gap between the slits becomes wider. In addition, this paper has dealt with a good agreement between two analytical solutions.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.5
• /
• pp.899-909
• /
• 1992

An iterative solution technique is presented to analyze the dynamic systems of rigid bodies subjected to kinematic constraints. Lagrange multipliers associated with the constraints are iteratively computed by monotonically reducing an appropriately defined constraint error vector, and the resulting equation of motion is solved by a well-established ODE technique. Constraints on the velocity and acceleration as well as the position are made to be satisfied at joints at each time step. Time integration is efficiently performed because decomposition or orthonormalization of the large matrix is not required at all. An acceleration technique is suggested for the faster convergence of the iterative scheme.

• Archives of Pharmacal Research
• /
• v.28 no.3
• /
• pp.370-375
• /
• 2005

The objective of this study was to develop a new reverse micelle-based microencapsulation technique to load tetracycline hydrochloride into PLGA microspheres. To do so, a reverse micellar system was formulated to dissolve tetracycline hydrochloride and water in ethyl formate with the aid of cetyltrimethylammonium bromide. The resultant micellar solution was used to dissolve 0.3 to 0.75 g of PLGA, and microspheres were prepared following a modified solvent quenching technique. As a control experiment, the drug was encapsulated into PLGA microspheres via a conventional methylene chloride-based emulsion procedure. The micro­spheres were then characterized with regard to drug loading efficiency, their size distribution and morphology. The reverse micellar procedure led to the formation of free-flowing, spherical microspheres with the size mode of 88 ~m. When PLGA microspheres were prepared follow­ing the conventional methylene chloride-based procedure, most of tetracycline hydrochloride leached to the aqueous external phase: A maximal loading efficiency observed our experimental conditions was below $5\%$. Their surfaces had numerous pores, while their internal architecture was honey-combed. In sharp contrast, the new reverse micellar encapsulation technique permitted the attainment of a maximal loading efficiency of 63.19 $\pm$$0.64\%$. Also, the microspheres had smooth and pore-free surfaces, and hollow cavities were absent from their internal matrices. The results of this study demonstrated that PLGA microspheres could be successfully prepared following the new reverse micellar encapsulation technique.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.7C
• /
• pp.624-632
• /
• 2005

We consider an adaptive bit-loading technique for bit interleaved coded modulation-orthogonal frequency division multiplexing(BICM-OFDM) systems. By adjusting transmission parameter of each subcarrier adaptively depending on the subchannel state, the performance of OFDM system can be improved dramatically. In this paper, the number of bits for each subcarrier is allocated to minimize bit error rate keeping the constant throughput for the adaptive transmission technique of BICM-OFDM system which can be applied to real time transmission. Also, We use the discrete Lagrange multiplier method to get the optimum solution under the integer bit allocation constraint. Simulation results show that computational amount of the proposed bit allocation technique is not high and BICM-OfDM system using the proposed technique can get the SNR gain by 2$\~$3 dB over nonadaptive one.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.1231-1236
• /
• 2004

In the present work, the practical thermal design process of 1 DIN car DVD receiver described. In the course of its efficient design, CAE technique was essentially used. CAE technique has reduced research period, man power and material cost but has increased research convenience, organized results and persuasive power. CAE technique helped to study parameters such as vent, fan and heat sink. Using these elements, it tried to meet optimal thermal solution. But safety standard, printed circuit board and framework mechanism should be considered as the constraint. To overcome these constraints, we tried to communicate and compromise with projectors in charge. After all, the price of those efforts has made the most competitive heat sink for heat dissipation in the 1 DIN car DVD receiver market. Moreover, we are trying to save $3 per product by removing fan. This paper is supposed to show an example of the CAE technique and help thermal designers to make electronic packaging goods.