• Journal of Oral Medicine and Pain
• /
• v.40 no.1
• /
• pp.10-16
• /
• 2015

Purpose: Pilocarpine has the effects on improvement of salivary flow and subjective symptoms for xerostomic patients. Because of unwanted side effects following its systemic administration, topical pilocarpine has been paid attention as an alternative. This study aimed to investigate effects of pilocarpine solution as mouthwash on salivary flow and adverse effects compared to systemic administration of 5 mg pilocarpine tablet in healthy subjects. Methods: The study was a double blind, placebo-controlled, crossover clinical trial. Five milligrams pilocarpine tablets, 4 mL of 2% pilocarpine solution and placebo solution were given to 12 healthy volunteers (6 males and 6 females) in a predetermined order with wash-out period of at least two days and unstimulated whole saliva was collected before and after administration of each drug. Blood pressure and pulse rate was also measured and subjective effect and potential side effects were evaluated by a self-administrated questionnaire. Results: Systemic (5 mg tablet) and topical (2% solution) use of pilocarpine significantly increased salivary flow rate in healthy subjects compared to placebo (p<0.001). In both the pilocarpine solution and tablet groups, salivary flow rates at 120 minutes after administration remained increased. Subjective effect on salivation was the largest in the pilocarpine tablet group, followed by the pilocarpine solution group (p<0.05). There was no significant difference in blood pressure and pulse rate after administration of all three drugs. Fewer side effects reported in the pilocarpine solution group than in the tablet group. Conclusions: Two percents pilocarpine solution as mouthwash increases salivary flow rate, definitely superior to placebo solution and comparable to pilocarpine tablet, with fewer side effects in healthy subjects. It indicates a possibility of pilocarpine solution as a useful alternative of pilocarpine tablets for the xerostomic patients with systemic diseases.

• Korean Journal of Materials Research
• /
• v.12 no.1
• /
• pp.58-67
• /
• 2002

In this study copper chloride(CuCl$_2$) solution was used as raw material to produce the fine copper oxide powder which has less than 1 $\mu\textrm{m}$ average particle size and has uniform particle size distribution by spray pyrolysis process. In the present study, the effects of reaction temperature, the injection speed of solution and air, the nozzle tip size and the concentration of raw material solution on the properties of produced powder were studied. The structure of the powder became much more compact with increasing the reaction temperature regardless of copper concentration of the raw material solution. The particle size of the powder increased accordingly with increasing the reaction temperature in case of 30 g/$\ell$ copper concentration of the solution. The particle size of the powder increased accordingly, and the surface structure of the powder became more porous with increasing the copper concentration of the raw material solution. When copper concentration in raw material solution was more than 100 g/$\ell$, all produced powder was CuCl regardless of reaction temperatures. When copper concentration in solution was below 30 g/$\ell$ and reaction temperature was higher than 90$0^{\circ}C$, CuO was the main phase. The surface of the powder tended to become porous with increasing the injection speed of solution. Particle size was increased and the surface of the powder showed severely disrupted state with increasing the nozzle tip size. The particle size was decreased and the particle size distribution was more uniform with increasing the air pressure through the nozzle.

• Journal of Environmental Science International
• /
• v.24 no.8
• /
• pp.981-992
• /
• 2015

This study is mainly focused on micellar effect of tetradecyltrimethyl ammonium bromide(TTABr) solution including alkylbenzimidazole(R-BI) on dephosphorylation of diphenyl-4-nitrophenylphosphinate(DPNPIN) in carbonate buffer(pH 10.7). Dephosphorylation of DPNPIN is accelerated by $BI^{\Theta}$ ion in $10^2$ M Carbonate buffer(pH 10.7) of $4{\times}10^{-4}$ M TTABr solution up to 80 times as compared with the reaction in Carbonate buffer by no benzimidazole(BI) solution of TTABr. The value of pseudo first order rate constant($k_{\psi}$) of the reaction in TTABr solution reached a maximum rate constant increasing micelle concentration. The reaction mediated by $R-BI^{\Theta}$ in micellar solutions are obviously slower than those by $BI^{\Theta}$, and the reaction rate were decreased with increase of lengths of alkyl groups. It seems due to steric effect of alkyl groups of $R-BI^{\Theta}$ in Stern layer of micellar solution. The surfactant reagent, TTABr, strongly catalyzes the reaction of DPNPIN with R-BI and its anion($R-BI^{\Theta}$) in Carbonate buffer(pH 10.7). For example, $4{\times}10^{-4}$ M TTABr in $1{\times}10^{-4}$ M BI solution increase the rate constant($k_{\psi}=99.7{\times}10^{-4}1/sec$) of the dephosphorylation by a factor ca. 28, when compared with reaction($k_{\psi}=3.5{\times}10^{-4}1/sec$) in BI solution(without TTABr). And no TTABr solution, in BI solution increase the rate constant($k_{\psi}=3.5{\times}10^{-4}1/sec$) of the dephosphorylation by a factor ca. 39, when compared with reaction ($k_{\psi}=1.0{\times}10^{-5}1/sec$) in water solution(without BI).

• Journal of Pharmaceutical Investigation
• /
• v.16 no.2
• /
• pp.43-54
• /
• 1986

To increase the bioavailability of clonixin, clonixin argininate was prepared and compared with clonixin by determining solubility, pKa, lipid-water partition coefficient, dissolution rate and in vivo tests. The results are summerized as followings; 1) The solubility of clonixin argininate was increased by 20 times in water, about 1.2 times in pH 1.2 and pH 8.0 buffer solution, and about 1.8 times in pH 6.8 buffer solution compared with that of clonixin. 2) pKa values of clonixin, clonixin lysinate and clonixin argininate were 6.32, 7.20 and 7.45, respectively. 3) The lipid-water partition coefficient of clonixin argininate was increased more than that of the clonixin in n-hexane, carbon tetrachloride, chloroform, methylene chloride, and n-butanol, but the partition coefficient of clonixin was increased more than that of clonixin argininate in benzene/pH 1.2 buffer solution, ether/pH 8.0 buffer solution, and 3-methylbutyl acetate/pH 1.2, pH 8.0 buffer solution. 4) The time required to dissolve 60% $(T_{60%},\;min.)$ of clonixin argininate was about 1.5 min. in water and pH 1.2 buffer solution, and about 5 min. in pH 6.8 buffer solution. $T_{60%}$ of clonixin lysinate was about 1.5 min. in water, about 1.8 min. in pH 6.8 buffer solution, and about 8 min. in pH 1.2 buffer solution. But $T_{60%}$ of clonixin was about 96 min. in pH 6.8 buffer solution, over 2 hours in water and pH 1.2 buffer solution. 5) Anti-inflammatory effect of clonixin argininate was increased more than that of clonixin over 6 hours, and that of clonixin lysinate was followed by lapse of time. 6) Analgesic effect of clonixin argininate was increased by 1.5 times more than that of clonixin and the effect of clonixin argininate was nearly identical with that of clonixin lysinate. 7) The absorption rates (Ka) of clonixin, clonixin lysinate and clonixin argininate were $0.169\;hr^{-1},\;0.652\;hr^{-1}$ and $0.723\;hr^{-1}$ in situ, respectively.

• Journal of Embryo Transfer
• /
• v.14 no.3
• /
• pp.145-153
• /
• 1999

This study was conducted to investigate the effects of vitrification solution and developmental stage on the survival rate of vitrified-thawed human blastocyst embryos. Human blastocyst embryos were cryopreserved by vitrification using EFS and GE solution, and their survival rates were examined after thawing and further culture. EFS solution was consisted of 40% ethylene glycol, 18% Ficoll 70 and 0.3M sucrose. GE solution was consisted of 25% glycerol and 25% ethylene glycol. Embryos were exposed to EFS and GE solution by 2 steps and 3 steps, respectively, and plunged into liquid nitrogen after loading into 0.25ml plastic straws. Blastocysts were classified into 4 groups in accordance with their developmental stage: into 1) EEB, 2) MEB and 3) EdB, of blastocysts developed on day 5, and 4) 6d-Bla(the blastocysts which formed on day 6). The blastocysts at each stage were vitrified by GE solution and cryopreserved in LN2. After thawing them, we examined their survival rates, respectively. The resulted of this study were as follows: 1. The survival rate of blastocysts vitrified by GE solution was 64.4%, significantly higher than that (5.7%) vitrified by EFS solution (P<0.001). 2. When the blastocysts were vitrified by GE solution according to each developmental stage, the survival rates of EEB, MEB, EdB and 6d-Bla were 65.9%, 65.9%, 73.2% and 58.1%, respectively. In conclusion, the cryopreservation of human blastocysts by vitrification is likely to have a marked advantage in terms of cost, work and time as compared to the conventional slow freezing in IVF-ET programs.

• Proceedings of the KSME Conference
• /
• 2001.06d
• /
• pp.292-297
• /
• 2001

This paper discusses the effect of varying LiBr solution circuits flow rates for a direct fired double effect commercial absorption chiller in the parallel flow configuration. The effects of solution flow rates have been investigated for generator, condenser, solution heat exchanger, absorber and evaporator. According to the result of this work, it was found that sensible heat rate of generator increases and refrigerant vapor generated in that decreases when inlet solution flow rate of that increases. As solution flow rate of absorber increases, the degree of superheat increases because of decreasing solution heat exchanger efficiency. The flashing vapor at the top of absorber increases in proportion to the degree of superheat whileas decreases cooling capacity inversely.

• Journal of the Korea Furniture Society
• /
• v.18 no.4
• /
• pp.275-281
• /
• 2007

This study was carried out to know bending process property of bentwood by treatment methods such as microwave and ammonia solution treatment. Bentwood processing was operated on bending-jig form with 60mm and 100mm radius of curvature (ROC). The species was used to Korean red pine (Pinus densiflora). No significant difference was shown in bentwood processing method on ROC. In treatment method, ammonia solution treatment for bentwood was better in dimensional stability and working ability than that of microwave treatment. However, bentwood stress was reduced with ammonia solution treatment. Color of bentwood surface appearance has a dark tendency in ammonia solution treatment. But it seems to beautiful effect of apparent annual ring is rising esthetically by ammonia solution treatment. To utilize wood as a exterior material for living amenity, it has to be closely examined from various angles including surface property, degree of swelling and shrinkage, drying state, retaining strength, durability, safety, and insect damage.

• Journal of Environmental Health Sciences
• /
• v.27 no.3
• /
• pp.107-112
• /
• 2001

This work reports the application of a hollow fiber module(HFM) for Cr(VI) extraction from heavy metal salts mixed solution by using microporous hydrophobic hollow fiber module. In HFM configuration, the organic extraction used for the extraction of Cr(VI) was di-(2-ethyl hexyl) phosphoric acid(D2EHPA) diluted with n-heptane. The study of HFM includes the influence of hydrodynamic and chemical condition, i.e., the flow rate of feed solution, the time of reactive extraction, the concentration of feed solution, and the pH of aqueous phase solutions. Several experiments with synthetic solution of different mixed components system of Cr(VI) solutions established optimum condition to achieve a clean separation of Cr(VI). It was possible to separate Cr(VI) in the presence of metal salts mixed solution, such as Zn(II), Ni(II), Cu(II), and Cd(II) using the HFM technique.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.20 no.5
• /
• pp.461-471
• /
• 2008

An analytical solution of one dimensional mild slope equation is derived by use of the WKB method, which has a form similar to Porter's solution(2003). The present solution is so general in the sense of application that it is comparable to the corresponding numerical solutions. In the derivation we also presented the solution of refraction equation in terms of surface displacement. Some numerical results of the present solution by use of Bremmer's method are presented which agree with existing numerical solutions.

• Textile Coloration and Finishing
• /
• v.5 no.2
• /
• pp.91-98
• /
• 1993

The silk fabrics were treated with color solution extracted from leaf of Camellia. The depression effect of destruction and yellowing of silk treated with color solution, shift of UV-VIS spectra of color solution, color difference of silk fabrics by dyeing with acid dyes and drycleaning fastness of silk treated with color solution were studied. UV-VIS spectra appeared to hypsochromic shift by irradiation. The decrease of tensile strength and the elongation of the silk treated with color solution showed depressed but those of untreated silk increased by irradiation. The yellowness index of silk treated with color solution showed a little change by irradiation. The color difference after dyeing with several acid dyes on treated and untreated silk showed not remarkable changes. Dsrycleaning fastness of silk treated by color solution was excellent.