• 대한소아치과학회지
• /
• 제50권2호
• /
• pp.217-228
• /
• 2023

이 연구의 목적은 4가지 규산 칼슘계 시멘트를 대상으로 물리적 특성을 비교하고 평가하는 것이다. 2종의 분말-용액 혼합형 재료인 RetroMTA^® [RTMX], Endocem^® MTA Zr [EZMX] 그리고 2종의 기혼합형 재료인 Well-Root^TMPT [WRPR], Endocem MTA^® premixed [ECPR]를 사용하여 경화시간, 용해도 및 압축강도를 비교하였다. 가장 짧은 경화 시간은 EZMX (123.33 ± 5.77초)에서 관찰되었으며, RTMX (146.67 ± 5.77초), ECPR (260.00 ± 17.32초) 및 WRPR (460.00 ± 17.32초) 순으로 증가하였다. 가장 높은 용해도는 WRPR (9.01 ± 0.55%)에서 관찰되었으며, RTMX (2.17 ± 0.07%), EZMX(0.55 ± 0.03%) 및 ECPR (0.17 ± 0.03%) 순으로 감소하였다. 또한 압축강도는 ECPR(76.67 ± 25.67 Mpa)에서 가장 높게 나타났고, WRPR (38.39 ± 7.25 Mpa), RTMX(35.07 ± 5.34 Mpa), EZMX (4.07 ± 0.60 Mpa) 순으로 감소하였다. 결론적으로 기혼합형 규산 칼슘계 시멘트들은 분말-용액 혼합형에 비해 긴 경화 시간을 나타내었다. 용해도 실험 결과 가장 낮은 용해도를 보인 ECPR과 가장 높은 용해도를 보인 WRPR에서 통계적 차이가 관찰되었다(p < 0.0083). 압축강도 실험결과 가장 낮은 압축 강도를 보인 EZMX와 가장 높은 압축 강도를 보인 ECPR에서 통계적 차이가 관찰되었다(p < 0.0083). ECPR은 분말-용액 혼합형에 비해 긴 경화 시간을 나타내지만, 미리 혼합되어 있어 혼합 시간이 필요하지 않고 용해도와 압축 강도가 개선되었으므로 임상 사용 시 선택될 수 있는 유망한 재료이다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2003년도 봄 학술발표회 논문집
• /
• pp.597-604
• /
• 2003

In the soil washing process, the contaminants are usually removed by abrasion from soil particles using mechanical energy and water However, organic contaminants with low water solubility like polycyclic aromatic hydrocarbons (PAH) are remained on soil particles. Previous studies have shown that surfactant possessing amphipathic activity enhances the solubility of organic materials. For this reason solutions with surfactants have been used to improve removal of organic contaminants on soil washing process. But, in this manner, many problems were found like complete loss of surfactants and additional contamination by surfactant. The remediation method using microemulsion has been introduced to overcome these disadvantages. In this case, surfactants are recycled by phase separation of microemulsion after remediation. In microemulsion process, the surfactant will be recycled by phase separation of the microemulsion into a surfactant-rich aqueous phase and an oil phase after extraction. That is why remediation concept applying microemulsion as washing media has been Introduced. Suitable microemulsion have to be used in order to have the chance of refilling the soil after decontamination and to avoid any risk due to toxicity. The purpose of this research is to evaluate effect of microemulsion to remediation of contaminated soil. We performed test with various organic contaminants like Pyrene and BTEX, also compared efficiency of remediation in microemulsion process with soil washing

• 한국지반공학회논문집
• /
• 제18권4호
• /
• pp.349-356
• /
• 2002

본 연구는 유류 화합물 중 phenol을 대표적인 친수성 유기 화합물로, phenanthrene을 대표적인 소수성 유기오염물로 선정하여 실내에서 인위적으로 오염시킨 세립질 지반에 EK 정화 실험을 실시하였다. 또한, 유기 오염물의 제거효율을 높이기 위해 기존의 양수처리에서 향상기법으로 사용하는 계면활성제를 이용한 향상기법을 연구하였다. 실내 bench 스케일 실험결과, 물에 대한 용해도가 높은 phenol은 비교적 쉽게 제거되었지만, 용해도가 낮은 phenanthrene은 거의 제거되지 않음을 알 수 있었다. 또한, 계면활성제를 적용한 향상기법에서 phenanthrene이 음극부 근처에서 누적되는 지연현상을 보였지만, 농도가 증가할수록 제거효율은 증가하였다. 가동시간을 증가시킨 실험을 통해 시간을 증가시키는 것이 계면활성제의 농도를 증가시키는 것보다 효과적인 것을 알 수 있었다.

• 한국환경보건학회지
• /
• 제22권4호
• /
• pp.25-32
• /
• 1996

The Bioconcentration factor(BCF) is used as an important criterion in the risk assessment of environmental contaminants. Also it can be used as indicator of biomagnification of environmentally hazardous chemicals through food-chain as well as a tool for ranking the bioconcentration potential of the chemicals in the environment. This paper reports the measured BCF value on carbofuran in Carassius auratus(goldfish), under steady state, and examined corelation between the BCF value and the depuration rate constant. Carassius auratus(goldfish) was chosen as test organism and test periods were 1-day, 3-day and 5-day. Experimental concentrations were 0.05, 0.10 and 0.50 ppm. Carbofuran in fish tissue and in test water was extracted with n-hexane and acetonitril. GC-ECD was used to detect and quantitate carbofuran. The depuration rate of carbofuran from the whole body of goldfish is determined over the 24-h period after treatment. The obtained results were as follows: 1. It was possible to determine short term BCFs of carbofuran through relatively simple procedure in environmental concentrations. 2. $BCF_1$ of carbofuran in concentration of 0.05, 0.10 and 0.50 ppm were 1.66, 1.64 0.61, $BCF_3$ were 2.08, 2.14, 0.66 and $BCF_5$ were 2.21, 2.57, 0.86, respectively. 3. Carbofuran concentration in fish extract was increased as increasing test concentration and prolonging test period, but $BCF_s$ in concentration of 0.50 ppm was greately decreased. 4. Determined deputation rate constants of carbofuran in concentration of 0.05, 0.10, 0.50 ppm were 0.076, 0.082 and 0.089, respectively. 5. It is considered that great decrease of $BCF_s$ in concentration of 0.50 ppm is due to high water solubility and stability of carbofuran in testwater. 6. It is suggested that low BCF of carbofuran is due to its relatively high water solubility and depuration rate, compared to BPMC, carbaryl and chlorothalonil.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 1999년도 추계학술발표회
• /
• pp.7-11
• /
• 1999

Soil washing process being operated in ex-situ mode using surfactants could be appropriate one of the most effective one for remediation. The choice of surfactants has been considered most significantly to accomplish tile reduction of expenditure and the increase of efficiency. This study was carried out screening test and solubility, washing experiment, and surfactant sorption experiments for 18 kinds of surfactant obtained. Results from each surfactant's PSR obtained by the slope indicated that nonionic surfactants have much higher solubility for HOCs than anion surfactants for that. The washing experiment to find out a removal efficiency of each surfactant's TPH, LE1017 and LE1019 showed high removal efficiency. Through on the result of estimating the extent of adsorption of surfactants for soils, nonion surfactants showed higher adsorption to soils than anion surfactants.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 1999년도 추계학술발표대회 논문집
• /
• pp.32-35
• /
• 1999

Poly(arylene ether phosphin oxide) (PEPO), Udel$^{\circledR}$ P-1700, Ultem$^{\circledR}$ 1000. poly(hydroxy ether) (PHE), carboxy modified poly(hydroxy ether)(C-PHE) and poly(hydroxy ether ethanol amine) (PHEA) were utilized for a coating of carbon fibers. Interfacial shear strength(IFSS) of polymers to carbon fibers was also evaluated in order to understand the adhesion mechanism. IFSS was measured via micro-droplet tests, and failure surfaces were analyzed by SEM. Diffusion between polymer and vinyl ester resin was investigated as a function of styrene content; 33. 40 or 50wt.% and the solubility parameters of polymers were calculated. The results were correlated to the interfacial shear strength. The highly enhanced interfacial shear strength (IFSS) was obtained with PEPO coating, and marginally improved IFSS with PHE, Udel$^{\circledR}$ and C-PHE coatings, but no improvement with PHEA and Ultem$^{\circledR}$ coatings.

• The Journal of Advanced Prosthodontics
• /
• 제5권3호
• /
• pp.241-247
• /
• 2013

PURPOSE. To evaluate the effect of various metal oxides on impact strength (IS), fracture toughness (FT), water sorption (WSP) and solubility (WSL) of heat-cured acrylic resin. MATERIALS AND METHODS. Fifty acrylic resin specimens were fabricated for each test and divided into five groups. Group 1 was the control group and Group 2, 3, 4 and 5 (test groups) included a mixture of 1% $TiO_2$ and 1% $ZrO_2$, 2% $Al_2O_3$, 2% $TiO_2$, and 2% $ZrO_2$ by volume, respectively. Rectangular unnotched specimens ($50mm{\times}6.0mm{\times}4.0mm$) were fabricated and drop-tower impact testing machine was used to determine IS. For FT, compact test specimens were fabricated and tests were done with a universal testing machine with a cross-head speed of 5 mm/min. For WSP and WSL, disc-shaped specimens were fabricated and tests were performed in accordance to ISO 1567. ANOVA and Kruskal-Wallis tests were used for statistical analyses. RESULTS. IS and FT values were significantly higher and WSP and WSL values were significantly lower in test groups than in control group (P<.05). Group 5 had significantly higher IS and FT values and significantly lower WSP values than other groups (P<.05) and provided 40% and 30% increase in IS and FT, respectively, compared to control group. Significantly lower WSL values were detected for Group 2 and 5 (P<.05). CONCLUSION. Modification of heat-cured acrylic resin with metal oxides, especially with $ZrO_2$, may be useful in preventing denture fractures and undesirable physical changes resulting from oral fluids clinically.

• 한국광물학회지
• /
• 제15권2호
• /
• pp.114-121
• /
• 2002

제주도 안디졸(Andisol) 토양 분포지역 중 화산성 쇄설물과 현무암으로부터 기원된 두 토양의 Bo층을 대상으로 완충능력을 계산하고 토양의 알루미늄 용해도가 완충능력에 미치는 영향을 연구하였다. 주상실험 결과는 pH 6.0과 4.0 부근에서 완충작용이 일어남을 보여 주며, 현무암기원의 토양보다 화산쇄설암기원 토양의 완충능력이 더 큰 것으로 나타났다. 다양한 pH조건에서의 배치평형실험 결과 다량의 알루미늄 함유 광물상을 갖는 제주도 안디졸 토양 Bo층에서의 알루미늄 거동은 $Al(OH)_3$, 이모골라이트 혹은 프로토-이모골라이트 등의 고상에 주로 영향을 받는 것으로 나타났다. Bo층 토양의 광물조성, 배치 평형실험결과, 그리고 주상실험 결과를 종합해 볼 때, pH 4.0 부근에서 나타나는 뚜렷한 완충능력($\beta$)은 깁사이트 및 프로토-이모골라이트의 용해도 특성에 의해서 좌우되는 것으로 해석된다. pH 6.0 내외의 완충작용은 규산염광물의 용해도 및 염기성양이온의 양이온교환반응에 의해 진행되고 있으나, 낮은 염기성 포화도는 토양산성화가 더 진행될 경우 이러한 완충효과가 오래 지속되지 못할 것임을 지시한다.

• Restorative Dentistry and Endodontics
• /
• 제35권5호
• /
• pp.344-352
• /
• 2010

연구목적: 본 연구의 목적은 glass ionomer cement (GIC)와 혼합한 mineral trioxide aggregate (MTA)의 경화 시간, 압축 강도, 용해도, pH를 평가하고 이것을 MTA, GIC, IRM, SuperEBA와 비교하는 것이다. 연구 재료 및 방법: 경화 시간과 압축 강도는 ISO 9917, 그리고 용해도는 ISO 6876 기준에 따라 측정하였다. pH는 고체시편 전용 전극이 연결된 pH meter를 이용하여 측정하였다. 결과: GIC와 혼합한 MTA의 경화시간은 MTA보다 유의하게 짧았으며 압축 강도는 7일간 모든 시점에서 다른 재료보다 유의하게 낮았다. GIC와 혼합한 MTA 중에서 1 : 1과 2 : 1 시편의 용해도는 다른 실험군보다 유의하게 높았다. 또한 GIC와 혼합한 MTA의 pH는 혼합직후 2-4의 범위에서 1일 후 5-7 사이로 증가하였다. 결론: GIC와 혼합한 MTA의 경화시간은 MTA에 비해 개선되었으나 압축강도 및 pH와 같은 다른 성질들은 MTA에 비해 오히려 열등한 것으로 밝혀졌다. 임상적 사용이 가능하려면, MTA의 기존 장점을 저해하지 않으면서 단점을 개선하기 위한 적절한 혼합비를 찾아내고 생체친화성을 평가하는 추가적인 연구가 필수적이다.

• The Journal of Advanced Prosthodontics
• /
• 제12권5호
• /
• pp.259-264
• /
• 2020

PURPOSE. The aim of this study was to investigate and compare the color stability of provisional restorative materials fabricated by 3D printing, dental milling, and conventional materials. MATERIALS AND METHODS. For the experimental groups, two commercially available 3D-printing provisional resins (E-Dent 100; EnvisionTEC GmbH, Germany & VeroGlaze™; Stratasys^®, USA), two dental milling blocks (PMMA Disk; Yamahachi Dental Co., Japan & Telio^®CAD; Ivoclar Vivadent AG, Liechtenstein), and two conventional materials (Alike™; GC Co., Japan & Luxatemp automix plus; DMG, Germany) were used. The water sorption and solubility test were (n=10, respectively) carried out according to ISO4049:2000 (International Standards Organization, Geneva, Switzerland). For the color stability test (n=10), coffee and black tea were used as staining solutions, and the specimens were stored for 12 weeks. Data were analyzed by one-way ANOVA and Tukey's HSD using SPSS version 22.0 (SPSS Inc. Chicago, IL, USA) (P<.05). RESULTS. Alike and Veroglaze showed the highest values and Luxatemp showed the lowest water sorption. In the color stability test, the ΔE of conventional materials varied depending on the staining solution. PMMA milling blocks showed a relatively low ΔE up to 4 weeks, and then significantly increased after 8 weeks (P<.05). 3D-printed materials exhibited a high ΔE or a significant increase over time (P<.05). CONCLUSION. The degree of discoloration increased with time, and a visually perceptible color difference value (ΔE) was shown regardless of the materials and solutions. PMMA milled and 3D-printed materials showed more rapid change in discoloration after 8 weeks.