• KSBB Journal
• /
• v.23 no.6
• /
• pp.546-550
• /
• 2008

Basic characteristics of astaxanthin including solubility and stability were investigated. Astaxanthin showed a very poor solubility in water, but it was highly soluble in organic solvents such as acetone and acetic acid. The solubility of astaxanthin in acidic condition was 10-20 times higher than those in neutral and basic conditions. Astaxanthin was very unstable in acidic condition under UV irradiation and in the presence of oxygen. Also, heating even for a very short time accelerated the degradation of astaxanthin. In conclusion, it is required to enhance the water-solubility and stability of astaxanthin for industrial application in food and cosmetic area.

• Fisheries and Aquatic Sciences
• /
• v.24 no.12
• /
• pp.406-414
• /
• 2021

The objective of this study was to investigate the yield and characteristics of collagen protein extracted from the muscle of four different species of mantis shrimp: Miyakella nepa, Harpiosquilla harpax, Erugosquilla woodmasoni, and Odontodactylus cultrifer. Mantis shrimp muscle was extracted by using a pepsin-solubilization technique, with 0.5 M acetic acid and 5% pepsin enzyme. The highest collagen yield was from M. nepa muscle (0.478 ± 0.06%), which was significantly greater (p < 0.05) than that from H. harpax, O. cultrifer, and E. woodmasoni (0.313 ± 0.03%, 0.123 ± 0.02%, and 0.015 ± 0.00%, respectively). The freeze-dried collagen appeared as thin fibers, and formed an opaque film. The pepsin-soluble collagen (PSC) from four mantis shrimp species was analyzed by gel electrophoresis. The results showed that all species of mantis shrimp contained type I collagen, consisting of β, α1, and α2 subunits with average molecular weights of 250, 145, and 118 kDa, respectively. The study of the solubility of collagen showed that, for NaCl, collagen had the highest relative solubility in 2% NaCl (80.20 ± 4.95%). In contrast, the solubility decreased at higher NaCl concentrations. However, in terms of pH, collagen had the highest relative solubility at pH 3 (91.32 ± 5.14%), and its solubility decreased at higher pH. FT-IR spectroscopy was used to compare the collagen with a model compound. Five wavenumbers in the spectrum for model collagen were identified: Amide A (3,406-3,421 cm^-1), amide B (2,916-2,940 cm^-1), amide I (1,639-1,640 cm^-1), amide II (1,539-1,570 cm^-1), and amide III (1,234-1,250 cm^-1).

• Journal of the Korean Society of Safety
• /
• v.11 no.1
• /
• pp.90-98
• /
• 1996

In order to investigate the effects on intumescence to fire protective coatings, the characteristics of solubility, hygroscopic nature and X-ray diffration results on soluble silicate were determined. Solubility is depended on the mutual action of each silicate. In the result of hygroscopic characteristics by water absorption under several kinds of relative humidity, lithium silicate is more stable than sodium and potassium silicate over moistures. Eventhough free water is evaporated over $100^{\circ}C$ , physically adsorption water and ionic water are eliminated about $200^{\circ}C$, but evolution of structural water is expected to be emitted between 400~$600^{\circ}C$ range. Those are considered to be contributed intumescence on soluble silicate.

• Journal of Pharmaceutical Investigation
• /
• v.10 no.3
• /
• pp.33-45
• /
• 1980

In order to increase the solubility of metoclopramide, various ratio coprecipitates with polyvinylpyrrolidone (M.W. 40,000) were prepared. The experiments of the solubility, physicochemical characteristics were quantitatively developed. The solubility increased as the ratio of rnetoclopramide to polyvinylpyrrolidone in metoclopramide-polyvinylpyrrolindone coprecipitate increased. In powder state, the dissolution rate of metoclopramide-polyvinylpyrrolidone coprecipitate was greater than that of metoclopramide and metoclopramide-polyvinylpyrrolidone physical mixture. Dissolution characteristics of non-disintegrating disk with constant surfacearea was in accord with Noyes-Nernst equation. The intrinsic dissolution rate, G, at $37^{\circ}C$ was $3.98{\times}10^{-7}M/cm^2{\cdot}min$ for metoclopramide, $2.26{\times}10^{-6}\;M/cm^2{\cdot}min$ for 1 : 5 metoclopramide-polyvinylpyrrolidone coprecipitate, respectively. Accordingly, activation energy of metoclopramide was 15,061cal/M, 9,178cal/M for 1 : 5 metoclopramide-polyvinylpyrrolidone coprecipitate and the activation energy decreased as the coprecipitate was formed. X-ray diffraction study revealed the fact that metoclopramide was crystalline, in contrast, there was no crystallinity evident in the 1 : 5 metoclopramide-polyvinylpyrrolidone coprecipitate. There was no difference between physical mixture and coprecipitate in TLC, UV and NMR studies. From the comparision between physical mixture and coprecipitate in IR spectrum, the interaction such as association between metoclopramide and polyvinylpyrrolidone was considered. But the association was easily dissociated in methanol solution.

• Journal of Korea Foundry Society
• /
• v.15 no.6
• /
• pp.566-573
• /
• 1995

In this study, the microstructural characteristics such as primary silicon, eutectic silicon, $SiC_p$ dispersion behavior, compound amount and Si solubility in $Al/SiC_p$ composite fabricated by the squeeze casting under various conditions were investigated systematically. As applied pressure(MPa) increases, cooling rate and compound amount are increased. In gravity casting, the cooling rate of hypereutectic composite is slower than of hypoeutectic composite by exothermic reaction of primary Si crystallization. But the cooling rate of hypereutectic composite is faster than that of hypoeutectic composite fabricated by same applied pressure, because amount of primary Si crystallization in hypereutectic composite was decreased, on the contrary, primary ${\alpha}-Al$ in hypoeutetic composite was increased due to increase of Si solubility in matrix by applied pressure. The crystalized primary silicon in hypereutectic composite fabricated by squeeze casting become more fine than that in non-pressure casting This is because mush zone became narrow due to increase of Si content of eutectic composition by pressure and time for growth of primary silicon got shorter according to applied pressure. It is turned out that eutectic temperature and liquidus are decreased by the increasing of squeeze pressure in all the composite due to thermal unstability of matrix owing to increasing of Si solubility in matrix by the increasing of applied pressure, as indicated in thermal anaiysis(DSC) results.

• Journal of the Korean Society of Safety
• /
• v.10 no.1
• /
• pp.28-34
• /
• 1995

To improve fire proofing characteristics of protective coating using ternary soluble silicate from two component mixture, the method of reducing solubility, increasing intumescence and protection time have been studied. Intumescence and solubility of ternary silicate mixtures were dependent on many kinds of water release and the strength of cation cross-links between polysilicate particles. Especially the effect of additive, for example, corn starch was investigated. However the solubility of ternary mixture is decrease in order of Na$^{+}$ >K$^{+}$ >Li$^{+}$, and the magnitute of intumescence is increased $K^{+}$ >Na$^{+}$ >Li$^{+}$.}$ +/.

• Journal of Mechanical Science and Technology
• /
• v.19 no.5
• /
• pp.1216-1225
• /
• 2005

$CO_{2}$ ocean sequestration is one of the promising options to reduce $CO_{2}$ concentration in the atmosphere because the ocean has vast capacity for $CO_{2}$ absorption. Therefore, in the present investigation, calculations for solubility and dissolution behavior of liquid $CO_{2}$ droplets released at 1000 m and 1500 m deep in the ocean from a moving ship and a fixed pipeline have been carried out in order to estimate the $CO_{2}$ dissolution characteristics in the ocean. The results show liquid $CO_{2}$ becomes bubble at around 500 m in depth, and the solubility of seawater is about $5{\%}$ less than of pure water. Also, it is shown that the injection of liquid from a moving ship is a more effective method for dissolution than from a fixed pipeline, and the presence of hydrate on liquid $CO_{2}$ acts as a resistant layer in dissolving liquid $CO_{2}$.

• Journal of the Korean Society of Safety
• /
• v.8 no.2
• /
• pp.30-38
• /
• 1993

To increase fire proofing characteristics of protective coating based on soluble alkali silicate, silicate coatings were studied on thermal properties, IR spectroscopy, solubility and intumescence. Intumescence and solubility of the samples were dependent on the strength of cationic cross-links between polysilicate particles. The degree of intumescence and solubility decrease K-silicate > Na-silicate > Li-silicate in the order. Especially Si$_2$O$_{5}$ $^{-2}$ crystalline regions were found to exist in Potassium silicate sample. Mixture of two kinds of silicate, for example, Lithium silicate when added to sodium silicate or potassium silicate was find to significantly reduce efflorescence and increase water resistance. This appears to be a result of stronger crosslinking between polysilicate particles by the small lithium cation.

• Journal of Sericultural and Entomological Science
• /
• v.41 no.3
• /
• pp.211-215
• /
• 1999

The pure-separation of calcium chloride-treated fibroin hydrolysates could be carried out using gel filtration chromatography. Also, the effect of its enzymatic hydrolysis was investigated in order to find out the enhancement of their functionality. The average molecular weight(Mw), solubility and free amino acid compositions of three hydrolysates samples (calcium chloride, calcium chloride-flavourzyme and calcium chloride-thermoase)were measured to compare their characteristics. The molecular weight of calcium chloride hydrolysate was about Mw 46,800 and it can be reduced to Mw 12,500 and 1,070 upon the enzymatic hydrolysis by flavourzyme and thermoase, repectively. A solubility of calcium chloride-treated samples shows about 60% while calcium chloride/enzyme-treated samples are perfectly soluble (100% solubility). The total amino acid composition of calcium chloride enzymatic hydrolysates are much higher than that of calcium chloride hydrolysate.

• Journal of the East Asian Society of Dietary Life
• /
• v.16 no.4
• /
• pp.453-457
• /
• 2006

This study investigated the extractability, solubility, Mg$^{2+}$-, Ca$^{2+}$- and EDTA-ATPase activity of actomyosin prepared from leg and breast muscle of dog meat. The actomyosin extractability of breast muscle(2,100.6 mg/l00 g) was higher than that of leg muscle(500.8 mg/l00 g). The Mg$^{2+}$-ATPase activity of actomyosin had a high ionic strength of 0.02$\sim$0.05 M KCI and did not differ between leg and breast muscle. The Ca$^{2+}$-ATPase activity of actomyosin had a high ionic strength of 0.02$\sim$0.10 M KCI and leg muscle had a higher level of Ca$^{2+}$-ATPase activity than breast muscle did. The EDTA-ATPase activity was lower in low ionic strength and showed higher in high ionic strength, and increased sharply with increasing ionic strength up to 0.3 M KCI. The solubility of actomyosin did not differ between leg and breast muscle, and the solubility started and ended at KCI concentrations of 0.35 M and 0.4 M, respectively.