• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1997년도 한국재료학회 추계학술발표회
• /
• pp.140-140
• /
• 1997

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2000년도 추계학술발표강연 및 논문개요집
• /
• pp.77-77
• /
• 2000

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1998년도 추계학술발표강연 및 논문개요집
• /
• pp.55-55
• /
• 1998

• 한국연소학회지
• /
• 제7권3호
• /
• pp.16-22
• /
• 2002

Combustion performance of an internally cycloned circulating fluidized bed for paper sludge was discussed through a series of batch type experiments. Operation parameters such as water content, feeding mass of sludge and secondary air injection rate were varied to find out the effect on the combustion performance, which was examined with carbon conversion rate and pollutant emission such as CO and NOx. A conventional solid fuel reaction was observed in the experiments of varying water content and feeding mass of the sludge, which is characterized with kinetic limited reaction zone, diffusion limited reaction zone and transition zone. Secondary air injection with swirl enhances the mixing of the gas phase as well as the solid phase, and improves combustion efficiency accompanied with higher carbon conversion rate and lower pollutant emission rate.

• 한국세라믹학회지
• /
• 제34권11호
• /
• pp.1099-1106
• /
• 1997

In the present study, the effect of TiB2 addition on the sintering behavior of ZrB2 ceramics was studied with hot pressing under Ar atmosphere. Hot pressing experiments were carried out in graphite dies at the 1$700^{\circ}C$, 180$0^{\circ}C$ under Ar atmosphere. The sintering density increased with increasing TiB2 contents. With the addition of 10wt% TiB2 almost theoretical density could be achieved by hot-pressing at 180$0^{\circ}C$. Zr-Ti-Fe-B compound in liquid phase was observed from the EDS and WDS analysis. It was considered that sinterability was enhanced due to the mass transfer through liquid phase formed at the sintering temperature. In addition of TiB2, transition metal of groups IV, substitutional solid solution could be formed.

• Bulletin of the Korean Chemical Society
• /
• 제3권2호
• /
• pp.37-44
• /
• 1982

In this work we have studied the multilayer stepwise adsorption of gases on solid adsorbents based on the previously developed theory. It is shown that stepwise adsorption isotherms emerge from our theory if an ad hoc adsorption regarding the degree of occupation for each successive layer is abolished and the effect of lateral intermolecular interactions among adsorbate molecules is included. In addition to these the effect of vertical interactions has also been taken into consideration. It seems that the vertical interaction plays a role in deciding the shape and the position of steps in resulting isotherms. It is evident from this research that it is the lateral interaction that is responsible for stepwise adsorption as long as the adsorbent surface is uniform and temperature is sufficiently low.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.409-409
• /
• 2011

All solid-state thin film lithium batteries have many applications in miniaturized devices because of lightweight, long-life, low self-discharge and high energy density. The research of cathode materials for thin film lithium batteries that provide high energy density at fast discharge rates is important to meet the demands for high-power applications. Among cathode materials, lithium manganese oxide materials as spinel-based compounds have been reported to possess specific advantages of high electrochemical potential, high abundant, low cost, and low toxicity. However, the lithium manganese oxide has problem of capacity fade which caused by dissolution of Mn ions during intercalation reaction and phase instability. For this problem, many studies on effect of various transition metals have been reported. In the preliminary study, the Sn-substituted LiMn2O4 thin films prepared by pulsed laser deposition have shown the improvement in discharge capacity and cycleability. In this study, the thin films of LiMn2O4 and LiSn0.0125Mn1.975O4 prepared by RF magnetron sputtering were studied with effect of deposition parameters on the phase, surface morphology and electrochemical property. And, all solid-state thin film batteries comprised of a lithium anode, lithium phosphorus oxy-nitride (LiPON) solid electrolyte and LiMn2O4-based cathode were fabricated, and the electrochemical property was investigated.

• 한국세라믹학회지
• /
• 제56권2호
• /
• pp.130-145
• /
• 2019

Widespread commercialization of solid oxide fuel cells (SOFCs) is expected to be realized in various application fields with the advent of cost-effective fabrication of cells and stacks in high volumes. Cost-reduction efforts have focused on production yield, power density, operation temperature, and continuous manufacturing. In this article, we examine several issues associated with processing for SOFCs from the standpoint of the bimodal packing model, considering the external constraints imposed by rigid substrates. Optimum compositions of composite cathode materials with high volume fractions of the second phase (particles dispersed in matrix) have been analyzed using the bimodal packing model. Constrained sintering of thin electrolyte layers is also discussed in terms of bimodal packing, with emphasis on the clustering of dispersed particles during anisotropic shrinkage. Finally, the structural transition of dispersed particle clusters during constrained sintering has been correlated with the structural stability of thin-film electrolyte layers deposited on porous solid substrates.

• 한국결정성장학회지
• /
• 제16권5호
• /
• pp.210-215
• /
• 2006

본 연구에서는 순 Cu 및 Nb 혼합분말에 대하여 Ar 분위기 중 고에너지 볼밀처리를 실시하여 기계적 합금화(MA) 효과를 조사하였다. $Cu_xNb_{100-x}$(x=5-50) 조성의 혼합분말을 각각 120시간까지 MA 처리 한 결과, Cu의 bcc-Nb 과포화 고용체가 30 at% Cu까지 넓어짐을 X선 회절분석, DSC 열분석 및 저온비열 측정을 통한 초전도 천이온도 변화로부터 알수 있었다. 120시간 MA 처리한 $Cu_{30}Nb_{70}$ 조성합금의 열분석 결과 broad한 발열반응만이 관찰되었으며, 볼밀처리에 의하여 계에 축적되는 에너지는 볼밀시간에 따라 증가하여 7.5kJ/mol 에 포화됨을 알 수 있었다. Miedema et al.의 계산에 의하면 $Cu_{30}Nb_{70}$ 혼합분말과 과포화 고용체의 자유에너지 차가 7kJ/mol이며, 본 연구에서 MA에 의하여 계에 축적된 에너지 값과 거의 같은 사실로부터 이 계에서 열역학적으로 과포화 고용체가 충분히 얻어질 수 있음을 나타내는 것으로 판단된다.

• 진공이야기
• /
• 제5권1호
• /
• pp.13-17
• /
• 2018

Phase transition is not unique to solid state systems or homogeneous molecular systems but it is also observed in highly heterogeneous biological systems. Phase transition and phase separation in cells are recently being found to be central to many biological functions by temporarily and locally controlling the storage and exchange of certain proteins and RNAs. There are also clues suggesting them to be playing pivotal roles in the spatial organization of chromosomes into topological domains and its time-dependent control. Here we introduce early efforts to explain at the molecular level how the spatiotemporal organization of chromosomes are programmed and modulated by the sequence and chemical modifications of the DNA. Continuing works may provide a physical framework to understand the molecular level control of chromosome structure and dynamics that determine the epigenetic state and the fate of the cells.