References
- A. Atkinson, S. Barnett, R. J. Gorte, J. Irvine, A. J. McEvoy, M. Mogensen, S. C. Singhal, and J. Vohs, "Advanced Anodes for High-Temperature Fuel Cells," Nat. Mater., 3 [1] 17-7 (2004). https://doi.org/10.1038/nmat1040
- R. O'Hayre, S. W. Cha, W. Colella, and F. B Prinz, Fuel Cell Fundamentals; Wiley, 2009.
- K. Huang and J. B. Goodenough, Solid Oxide Fuel Cell Technology: Principles, Performance and Operations; Elsevier, 2009.
- J. T. Irvine, D. Neagu, M. C. Verbraeken, C. Chatzichrist odoulou, C. Graves, and M. B. Mogensen, "Evolution of the Electrochemical Interface in High-Temperature Fuel Cells and Electrolysers," Nat. Energy, 1 [1] 15014 (2016). https://doi.org/10.1038/nenergy.2015.14
- W. H. Kan and V. Thangadurai, "Challenges and Prospects of Anodes for Solid Oxide Fuel Cells (SOFCs)," Ionics, 21 [2] 301-18 (2015). https://doi.org/10.1007/s11581-014-1334-6
- E. D. Wachsman and K. T. Lee, "Lowering the Temperature of Solid Oxide Fuel Cells," Science, 334 [6058] 935-39 (2011). https://doi.org/10.1126/science.1204090
- J. Huijsmans, F. Van Berkel, and G. Christie, "Intermediate Temperature SOFC-a Promise for the 21st Century," J. Power Sources, 71 [1-2] 107-10 (1998). https://doi.org/10.1016/S0378-7753(97)02789-4
- N. Q. Minh and T. Takahashi, Science and Technology of Ceramic Fuel Cells, Elsevier Science B.V., Amsterdam, 1995.
- A. S. Thorel, "Tape Casting Ceramics for High Temperature Fuel Cell Applications, Ceramic Materials," pp. 1-68 in Ceramic Materials. Ed. By W. Wunderlich, Sciyo, 2010.
- A. B. Stambouli and E. Traversa, "Solid Oxide Fuel Cells (SOFCs): a Review of an Environmentally Clean and Efficient Source of Energy," Renewable Sustainable Energy Rev., 6 [5] 433-55 (2002). https://doi.org/10.1016/S1364-0321(02)00014-X
- S. C. Singhal, "Solid Oxide Fuel Cells for Stationary, Mobile, and Military Applications," Solid State Ionics, 152 405-10 (2002). https://doi.org/10.1016/S0167-2738(02)00349-1
- B. Zhu, "Functional Ceria-Salt-Composite Materials for Advanced ITSOFC Applications," J. Power Sources, 114 [1] 1-9 (2003). https://doi.org/10.1016/S0378-7753(02)00592-X
- D. Nikbin, "Micro SOFCs: Why Small is Beautiful," Fuel Cell Review, 3 [2] 21-4 (2006).
- S. C. Singhal, "Solid Oxide Fuel Cells," Electrochem. Soc. Interface, 16 41-4 (2007). https://doi.org/10.1149/2.F06074IF
- S. C. Singhal and K. Kendall, High-Temperature Solid Oxide Fuel Cells: Fundamentals, Design and Applications; Elsevier, 2003.
- J. Fergus, R. Hui, X. Li, D. P. Wilkinson, and J. Zhang, Solid Oxide Fuel Cells: Materials Properties and Performance; CRC Press, Taylor & Francis Group, 2016.
- L. Fan, C. Wang, M. Chen, and B. Zhu, "Recent Development of Ceria-Based (Nano) Composite Materials for Low Temperature Ceramic Fuel Cells and Electrolyte-Free Fuel Cells," J. Power Sources, 234 154-74 (2013). https://doi.org/10.1016/j.jpowsour.2013.01.138
- V. Haanappel, "Advances in Solid Oxide Fuel Cell Development between 1995 and 2010 at Forschungszentrum Julich GmbH, Germany," pp. 247-74 in Fuel Cell Science and Engineering. Ed. by D. Stolten and B. Emonts, Wiley-VCH Verlag GmbH & Co. KGaA; 2012.
- A. Bieberle-Hutter, D. Beckel, U. P. Muecke, J. L. Rupp, A. Infortuna, and L. J. Gauckler, "Micro-Solid Oxide Fuel Cells as Battery Replacement," MST News, 4 12 (2005).
- D. Beckel, A. Bieberle-Hütter, A. Harvey, A. Infortuna, U. P. Muecke, M. Prestat, J. L. Rupp, and L. J. Gauckler, "Thin Films for Micro Solid Oxide Fuel Cells," J. Power Sources, 173 [1] 325-45 (2007). https://doi.org/10.1016/j.jpowsour.2007.04.070
- N. Q. Minh, "Solid Oxide Fuel Cell Technology-Features and Applications," Solid State Ionics, 174 [1-4] 271-77 (2004). https://doi.org/10.1016/j.ssi.2004.07.042
- F. Tietz, H.-P. Buchkremer, and D. Stover, "Components Manufacturing for Solid Oxide Fuel Cells," Solid State Ionics, 152 373-81 (2002). https://doi.org/10.1016/S0167-2738(02)00344-2
- Y. Leng, S. Chan, K. Khor, and S. Jiang, "Performance Evaluation of Anode-Supported Solid Oxide Fuel Cells with Thin Film YSZ Electrolyte," Int. J. Hydrogen Energy, 29 [10] 1025-33 (2004). https://doi.org/10.1016/j.ijhydene.2004.01.009
- L. Blum, L. B. De Haart, J. Malzbender, N. H. Menzler, J. Remmel, and R. Steinberger-Wilckens, "Recent Results in Jülich Solid Oxide Fuel Cell Technology Development," J. Power Sources, 241 477-85 (2013). https://doi.org/10.1016/j.jpowsour.2013.04.110
- C. Sun and U. Stimming, "Recent Anode Advances in Solid Oxide Fuel Cells," J. Power Sources, 171 [2] 247-60 (2007). https://doi.org/10.1016/j.jpowsour.2007.06.086
- R. Scataglini, M. Wei, A. Mayyas, S. Chan, T. Lipman, and M. Santarelli, "A Direct Manufacturing Cost Model for Solid-Oxide Fuel Cell Stacks," Fuel Cells, 17 [6] 825-42 (2017). https://doi.org/10.1002/fuce.201700012
- J. Otomo, J. Oishi, T. Mitsumori, H. Iwasaki, and K. Yamada, "Evaluation of Cost Reduction Potential for 1 kW Class SOFC Stack Production: Implications for SOFC Technology Scenario," Int. J. Hydrogen Energy, 38 [33] 14337-47 (2013). https://doi.org/10.1016/j.ijhydene.2013.08.110
- K. Sopian and W. R. W. Daud, "Challenges and Future Developments in Proton Exchange Membrane Fuel Cells," Renewable energy, 31 [5] 719-27 (2006). https://doi.org/10.1016/j.renene.2005.09.003
- I. Bar-On, R. Kirchain, and R. Roth, "Technical Cost Analysis for PEM Fuel Cells," J. Power Sources, 109 [1] 71-5 (2002). https://doi.org/10.1016/S0378-7753(02)00062-9
- V. Mehta and J. S. Cooper, "Review and Analysis of PEM Fuel Cell Design and Manufacturing," J. Power Sources, 114 [1] 32-53 (2003). https://doi.org/10.1016/S0378-7753(02)00542-6
- B. D. James, A. B. Spisak, and W. G. Colella, Manufacturing Cost Analysis of Stationary Fuel Cell Systems; Strategic Analysis Inc. Arlington, VA, 2012.
- R. Mueke, "Introduction to SOFC Technologies: Manufacturing of SOFCs," Joint European Summer School for Fuel Cell and Hydrogen Technology, Viterbo, Italy, 2011.
- R. Knibbe, J. Hjelm, M. Menon, N. Pryds, M. Sogaard, H. J. Wang, and K. Neufeld, "Cathode-Electrolyte Interfaces with CGO Barrier Layers in SOFC," J. Am. Ceram. Soc., 93 [9] 2877-83 (2010). https://doi.org/10.1111/j.1551-2916.2010.03763.x
- A. Tsoga, A. Gupta, A. Naoumidis, and P. Nikolopoulos, "Gadolinia-Doped Ceria and Yttria Stabilized Zirconia Interfaces: Regarding Their Application for SOFC Technology," Acta Mater., 48 [18-19] 4709-14 (2000). https://doi.org/10.1016/S1359-6454(00)00261-5
- X.-D. Zhou, B. Scarfino, and H. U. Anderson, "Electrical Conductivity and Stability of Gd-Doped Ceria/Y-doped Zirconia Ceramics and Thin Films," Solid State Ionics, 175 [1-4] 19-22 (2004). https://doi.org/10.1016/j.ssi.2004.09.040
-
G. C. Kostogloudis and C. Ftikos, "Chemical Compatibility of
$RE_{1−x}Sr_xMnO_{3{\pm}{\delta}}$ (RE= La, Pr, Nd, Gd, 0${\leq}$ x${\leq}$ 0.5) with Yttria Stabilized Zirconia Solid Electrolyte," J. Eur. Ceram. Soc., 18 [12] 1707-10 (1998). https://doi.org/10.1016/S0955-2219(98)00096-X -
J. Labrincha, F. Marques, and J. Frade, "Protonic and Oxygen-Ion Conduction in
$SrZrO_3$ -Based Materials," J. Mater. Sci., 30 [11] 2785-92 (1995). https://doi.org/10.1007/BF00349644 -
S. P. Simner, J. P. Shelton, M. D. Anderson, and J. W. Stevenson, "Interaction between
$La(Sr)FeO_3$ SOFC Cathode and YSZ Electrolyte," Solid State Ionics, 161 [1-2] 11-8 (2003). https://doi.org/10.1016/S0167-2738(03)00158-9 - F. Tietz, D. Sebold, A. Brisse, and J. Schefold, "Degradation Phenomena in a Solid Oxide Electrolysis Cell after 9000 h of Operation," J. Power Sources, 223 129-35 (2013). https://doi.org/10.1016/j.jpowsour.2012.09.061
- H. Shi, R. Ran, and Z. Shao, "Wet Powder Spraying Fabrication and Performance Optimization of IT-SOFCs with Thin-Film ScSZ Electrolyte," Int. J. Hydrogen Energy, 37 [1] 1125-32 (2012). https://doi.org/10.1016/j.ijhydene.2011.02.077
- T. L. Nguyen, K. Kobayashi, T. Honda, Y. Iimura, K. Kato, A. Neghisi, K. Nozaki, F. Tappero, K. Sasaki, and H. Shirahama, "Preparation and Evaluation of Doped Ceria Interlayer on Supported Stabilized Zirconia Electrolyte SOFCs by Wet Ceramic Processes," Solid State Ionics, 174 [1-4] 163-74 (2004). https://doi.org/10.1016/j.ssi.2004.06.017
-
D. Wang, J. Wang, C. He, Y. Tao, C. Xu, and W. G. Wang, "Preparation of a
$Gd_{0.1}Ce_{0.9}O_{2-{\delta}}$ Interlayer for Intermediate-Temperature Solid Oxide Fuel Cells by Spray Coating," J. Alloys Compd., 505 [1] 118-24 (2010). https://doi.org/10.1016/j.jallcom.2010.06.017 - Z. Gao, V. Y. Zenou, D. Kennouche, L. Marks, and S. A. Barnett, "Solid Oxide Cells with Zirconia/Ceria Bi-Layer Electrolytes Fabricated by Reduced Temperature Firing," J. Mater. Chem. A, 3 [18] 9955-64 (2015). https://doi.org/10.1039/C5TA01964H
-
D. Chen, G. Yang, Z. Shao, and F. Ciucci, "Nanoscaled Sm-Doped
$CeO_2$ Buffer Layers for Intermediate-Temperature Solid Oxide Fuel Cells," Electrochem. Commun., 35 131-34 (2013). https://doi.org/10.1016/j.elecom.2013.08.017 - H.-S. Noh, K. J. Yoon, B.-K. Kim, H.-J. Je, H.-W. Lee, J.-H. Lee, and J.-W. Son, "The Potential and Challenges of Thin-Film Electrolyte and Nanostructured Electrode for Yttria-Stabilized Zirconia-Base Anode-Supported Solid Oxide Fuel Cells," J. Power Sources, 247 105-11 (2014). https://doi.org/10.1016/j.jpowsour.2013.08.072
- T. Tsai, E. Perry, and S. Barnett, "Low-Temperature Solid-Oxide Fuel Cells Utilizing Thin Bilayer Electrolytes," J. Electrochem. Soc., 144 [5] L130-32 (1997). https://doi.org/10.1149/1.1837635
-
D.-H. Myung, J. Hong, K. Yoon, B.-K. Kim, H.-W. Lee, J.-H. Lee, and J.-W. Son, "The Effect of an Ultra-Thin Zirconia Blocking Layer on the Performance of a 1-
${\mu}m$ -Thick Gadolinia-Doped Ceria Electrolyte Solid-Oxide Fuel Cell," J. Power Sources, 206 91-6 (2012). https://doi.org/10.1016/j.jpowsour.2012.01.117 - Z. Lu, J. Hardy, J. Templeton, J. Stevenson, D. Fisher, N. Wu, and A. Ignatiev, "Performance of Anode-Supported Solid Oxide Fuel Cell with Thin Bi-Layer Electrolyte by Pulsed Laser Deposition," J. Power Sources, 210 292-96 (2012). https://doi.org/10.1016/j.jpowsour.2012.03.036
- E. O. Oh, C. M. Whang, Y. R. Lee, S. Y. Park, D. H. Prasad, K. J. Yoon, J. W. Son, J. H. Lee, and H. W. Lee, "Extremely Thin Bilayer Electrolyte for Solid Oxide Fuel Cells (SOFCs) Fabricated by Chemical Solution Deposition (CSD)," Adv. Mater., 24 [25] 3373-77 (2012). https://doi.org/10.1002/adma.201200505
- E.-O. Oh, C.-M. Whang, Y.-R. Lee, J.-H. Lee, K. J. Yoon, B.-K. Kim, J.-W. Son, J.-H. Lee, and H.-W. Lee, "Thin Film Yttria-Stabilized Zirconia Electrolyte for Intermediate- Temperature Solid Oxide Fuel Cells (IT-SOFCs) by Chemical Solution Deposition," J. Eur. Ceram. Soc., 32 [8] 1733-41 (2012). https://doi.org/10.1016/j.jeurceramsoc.2012.01.021
- E.-O. Oh, C.-M. Whang, Y.-R. Lee, S.-Y. Park, D. H. Prasad, K. J. Yoon, B.-K. Kim, J.-W. Son, J.-H. Lee, and H.-W. Lee, "Fabrication of Thin-Film Gadolinia-Doped Ceria (GDC) Interdiffusion Barrier Layers for Intermediate- Temperature Solid Oxide Fuel Cells (IT-SOFCs) by Chemical Solution Deposition (CSD)," Ceram. Int., 40 [6] 8135-42 (2014). https://doi.org/10.1016/j.ceramint.2014.01.008
- X. Zhang and M. Robertson, C. Deces-Petit, Y. Xie, R. Hui, S. Yick, E. Styles, J. Roller, O. Kesler, R. Maric, "NiO-YSZ Cermets Supported Low Temperature Solid Oxide Fuel Cells," J. Power Sources, 161 [1] 301-7 (2006). https://doi.org/10.1016/j.jpowsour.2006.03.057
- N. Q. Minh, "Ceramic Fuel Cells," J. Am. Ceram. Soc., 76 [3] 563-88 (1993). https://doi.org/10.1111/j.1151-2916.1993.tb03645.x
- O. Yamamoto, "Solid Oxide Fuel Cells: Fundamental Aspects and Prospects," Electrochim. Acta, 45 [15-16] 2423-35 (2000). https://doi.org/10.1016/S0013-4686(00)00330-3
- S. C. Singhal, "Advances in Solid Oxide Fuel Cell Technology," Solid State Ionics, 135 [1-4] 305-13 (2000). https://doi.org/10.1016/S0167-2738(00)00452-5
- L. Blum, L. De Haart, J. Malzbender, N. Margaritis, and N. H. Menzler, "Anode-Supported Solid Oxide Fuel Cell Achieves 70000 Hours of Continuous Operation," Energy Technol., 4 [8] 939-42 (2016). https://doi.org/10.1002/ente.201600114
- C. Duan, J. Tong, M. Shang, S. Nikodemski, M. Sanders, S. Ricote, A. Almansoori, and R. J. S. O'Hayre, "Readily Processed Protonic Ceramic Fuel Cells with High Performance at Low Temperatures," Science, 349 [6254] 1321-26 (2015). https://doi.org/10.1126/science.aab3987
-
H. An, H.-W. Lee, B.-K. Kim, J.-W. Son, K. J. Yoon, H. Kim, D. Shin, H.-I. Ji, and J.-H. Lee, "
$A5{\times}5cm^2$ Protonic Ceramic Fuel Cell with a Power Density of$1.3Wcm^{-2}$ at$600^{\circ}C$ ," Nat. Energy, 3 [10] 870 (2018). https://doi.org/10.1038/s41560-018-0230-0 - F. Han, R. Mucke, T. Van Gestel, A. Leonide, N. H. Menzler, H. P. Buchkremer, and D. Stover, "Novel High-Performance Solid Oxide Fuel Cells with Bulk Ionic Conductance Dominated Thin-Film Electrolytes," J. Power Sources, 218 157-62 (2012). https://doi.org/10.1016/j.jpowsour.2012.06.087
- J.-D. Kim, G.-D. Kim, J.-W. Moon, H.-W. Lee, K.-T. Lee, and C.-E. Kim, "The Effect of Percolation on Electrochemical Performance," Solid State Ionics, 133 [1-2] 67-77 (2000). https://doi.org/10.1016/S0167-2738(00)00681-0
- M. Park, H. Y. Jung, J. Y. Kim, H. Kim, K. J. Yoon, J.-W. Son, J.-H. Lee, B.-K. Kim, and H.-W. Lee, "Effects of Mixing State of Composite Powders on Sintering Behavior of Cathode for Solid Oxide Fuel Cells," Ceram. Int., 43 [15] 11642-47 (2017). https://doi.org/10.1016/j.ceramint.2017.05.347
- V. Haanappel, J. Mertens, D. Rutenbeck, C. Tropartz, W. Herzhof, D. Sebold, and F. Tietz, "Optimisation of Processing and Microstructural Parameters of LSM Cathodes to Improve the Electrochemical Performance of Anode-Supported SOFCs," J. Power Sources, 141 [2] 216-26 (2005). https://doi.org/10.1016/j.jpowsour.2004.09.016
- H. S. Song, W. H. Kim, S. H. Hyun, J. Moon, J. Kim, and H.-W. Lee, "Effect of Starting Particulate Materials on Microstructure and Cathodic Performance of Nanoporous LSM-YSZ Composite Cathodes," J. Power Sources, 167 [2] 258-64 (2007). https://doi.org/10.1016/j.jpowsour.2007.01.095
- M. J. Jorgensen, S. Primdahl, C. Bagger, and M. Mogensen, "Effect of Sintering Temperature on Microstructure and Performance of LSM-YSZ Composite Cathodes," Solid State Ionics, 139 [1-2] 1-11 (2001). https://doi.org/10.1016/s0167-2738(00)00818-3
- F. F. Lange, "Powder Processing Science and Technology for Increased Reliability," J. Am. Ceram. Soc., 72 [1] 3-15 (1989). https://doi.org/10.1111/j.1151-2916.1989.tb05945.x
-
M. D. Sacks and T. Y. Tseng, "Preparation of
$SiO_2$ Glass from Model Powder Compacts: II, Sintering," J. Am. Ceram. Soc., 67 [8] 532-37 (1984). https://doi.org/10.1111/j.1151-2916.1984.tb19165.x -
H. W. Lee and M. D. Sacks, "Pressureless Sintering of SiC-Whisker-Reinforced
$Al_2O_3$ Composites: I, Effect of Matrix Powder Surface Area," J. Am. Ceram. Soc., 73 [7] 1884-93 (1990). https://doi.org/10.1111/j.1151-2916.1990.tb05240.x - T. S. Yeh and M. D. Sacks, "Effect of Green Microstructure on Sintering of Alumina," Ceramic. Trans., 7 309-31 (1990).
- L. C. De Jonghe, M. N. Rahaman, and C. J. Hsueh, "Transient Stresses in Bimodal Compacts during Sintering," Acta Mater., 34 [7] 1467-71 (1986). https://doi.org/10.1016/0001-6160(86)90034-9
- M. W. Weiser and L. C. De Jonghe, "Inclusion Size and Sintering of Composite Powders," J. Am. Ceram. Soc., 71 [3] C125-27 (1988).
-
O. Sudre and F. F. Lange, "Effect of Inclusions on Densification: I, Microstructural Development in an
$Al_2O_3$ Matrix Containing a High Volume Fraction of$ZrO_2$ Inclusions," J. Am. Ceram. Soc., 75 [3] 519-24 (1992). https://doi.org/10.1111/j.1151-2916.1992.tb07836.x - O. Sudre, G. Bao, B. Fan, F. F. Lange, and A. G. Evans, "Effect of Inclusions on Densification: II, Numerical Model," J. Am. Ceram. Soc., 75 [3] 525-31 (1992). https://doi.org/10.1111/j.1151-2916.1992.tb07837.x
- O. Sudre and F. F. Lange, "The Effect of Inclusions on Densification; III, the Desintering Phenomenon," J. Am. Ceram. Soc., 75 [12] 3241-51 (1992). https://doi.org/10.1111/j.1151-2916.1992.tb04417.x
- M. Rahaman and L. C. De Jonghe, "Effect of Rigid Inclusions on the Sintering of Glass Powder Compacts," J. Am. Ceram. Soc., 70 [12] C348-51 (1987).
- D. Stauer, A. Aharony, Introduction to Percolation Theory; Taylor and Francis, London, 1994.
- M. Sahini and M. Sahimi, Applications of Percolation Theory; CRC Press, 2014.
- S. Timoshenko and J. N. Goodier, Theory of Elasticity; McGraw-Hill, New York, 1982.
- R. M. German, "Prediction of Sintered Density for Bimodal Powder Mixtures," Metal. Trans. A, 23 [5] 1455-65 (1992). https://doi.org/10.1007/BF02647329
- F. F. Lange, "Constrained Network Model for Predicting Densification Behavior of Composite Powders," J. Mater. Res., 2 [1] 59-65 (1987). https://doi.org/10.1557/JMR.1987.0059
- H.-W. Lee, M. Park, J. Hong, H. Kim, K. J. Yoon, J.-W. Son, J.-H. Lee, and B.-K. Kim, "Constrained Sintering in Fabrication of Solid Oxide Fuel Cells," Materials, 9 [8] 675 (2016). https://doi.org/10.3390/ma9080675
- J. V. Milewski, "The Combined Packing of Rods and Spheres in Reinforcing Plastics," Ind. Eng. Chem. Prod. Res. Dev., 17 [4] 363-66 (1978). https://doi.org/10.1021/i360068a016
- J. V. Milewski, "Efficient Use of Whiskers in the Reinforcement of Ceramics," Adv. Ceram. Mat., 1 36-41 (1986).
- R. M. German, Particle Packing Characteristics; pp. 135-80, Metal Powder Industries Federation, Princeton, 1989.
- J. R. Wilson, A. T. Duong, M. Gameiro, H.-Y. Chen, K. Thornton, D. R. Mumm, and S. A. Barnett, "Quantitative Three-Dimensional Microstructure of a Solid Oxide Fuel Cell Cathode," Electrochem. Commun., 11 [5] 1052-56 (2009). https://doi.org/10.1016/j.elecom.2009.03.010
- V. Dusastre and J. A. Kilner, "Optimisation of Composite Cathodes for Intermediate Temperature SOFC Applications," Solid State Ionics, 126 [1-2] 163-74 (1999). https://doi.org/10.1016/S0167-2738(99)00108-3
-
E. P. Murray, M. Sever, and S. A. Barnett, "Electrochemical Performance of (La, Sr)(Co, Fe)
$O_3$ -(Ce, Gd)$O_3$ Composite Cathodes," Solid State Ionics, 148 [1-2] 27-34 (2002). https://doi.org/10.1016/S0167-2738(02)00102-9 - J. Moon, J.-A. Park, S.-J. Lee, and T. Zyung, "Insight into the Shear-Induced Ordering of Colloidal Particles by a Spin-Coating Method," Jpn. J. Appl. Phys., 47 [10R] 7968 (2008). https://doi.org/10.1143/JJAP.47.7968
- M. D. Sacks, "Properties of Silicon Suspensions and Cast Bodies," Am. Ceram. Soc. Bull., 63 [12] 1510 (1984).
- D. J. Jeffrey and A. Acrivos, "The Rheological Properties of Suspensions of Rigid Particles," AlChE J., 22 [3] 417-32 (1976). https://doi.org/10.1002/aic.690220303
- W. H. Boersma, J. Laven, and H. N. Stein, "Shear Thickening (Dilatancy) in Concentrated Dispersions," AlChE J., 36 [3] 321-32 (1990). https://doi.org/10.1002/aic.690360302
- R. L. Hoffman, "Interrelationships of Particle Structure and Flow in Concentrated Suspensions," MRS Bull., 16 [8] 32-7 (1991). https://doi.org/10.1557/S088376940005630X
- D. J. Green, O. Guillon, and J. Rodel, "Constrained Sintering: A Delicate Balance of Scales," J. Eur. Ceram. Soc., 28 [7] 1451-66 (2008). https://doi.org/10.1016/j.jeurceramsoc.2007.12.012
- O. Guillon, S. Kraus, and J. Rodel, "Influence of Thickness on the Constrained Sintering of Alumina Films," J. Eur. Ceram. Soc., 27 [7] 2623-27 (2007). https://doi.org/10.1016/j.jeurceramsoc.2006.10.007
- O. Guillon, L. Weiler, and J. Rödel, "Anisotropic Microstructural Development during the Constrained Sintering of Dip-Coated Alumina Thin Films," J. Am. Ceram. Soc., 90 [5] 1394-400 (2007). https://doi.org/10.1111/j.1551-2916.2007.01565.x
- J. Bernal and J. Mason, "Packing of Spheres: Co-Ordination of Randomly Packed Spheres," Nature, 188 [4754] 910-11 (1960). https://doi.org/10.1038/188910a0
- W. M. Visscher and M. Bolsterli, "Random Packing of Equal and Unequal Spheres in Two and Three Dimensions," Nature, 239 [5374] 504-7 (1972). https://doi.org/10.1038/239504a0
- E. Tory, N. Cochrane, and S. R. Waddell, "Anisotropy in Simulated Random Packing of Equal Spheres," Nature, 220 [5171] 1023-24 (1968). https://doi.org/10.1038/2201023a0
- R. Zallen, The Physics of Amorphous Solids; John Wiley & Sons, 2008.
- G. W. Scherer, "Viscous Sintering of Particle-Filled Composites," Ceram. Bull., 70 [6] 1059-63 (1991).
- K. R. Iler, The Chemistry of Silica; pp. 480−488, John Wiley & Sons, New York, 1979.
- P. Plonczak, M. Joost, J. Hjelm, M. Sogaard, M. Lundberg, and P. V. Hendriksen, "A High Performance Ceria Based Interdiffusion Barrier Layer Prepared by Spin-Coating," J. Power Sources, 196 [3] 1156-62 (2011). https://doi.org/10.1016/j.jpowsour.2010.08.108
- R. K. Bordia and A. Jagota, "Crack Growth and Damage in Constrained Sintering Films," J. Am. Ceram. Soc., 76 [10] 2475-85 (1993). https://doi.org/10.1111/j.1151-2916.1993.tb03969.x
-
F. F. Lange, "Processing-Related Fracture Origins: I, Observations in Sintered and Isostatically Hot-Pressed
$A1_2O_3/ZrO_2$ Composites," J. Am. Ceram. Soc., 66 [6] 396-98 (1983). https://doi.org/10.1111/j.1151-2916.1983.tb10068.x - F. F. Lange, "Densification of Powder Rings Constrained by Dense Cylindrical Cores," Acta Metall., 37 [2] 697-704 (1989). https://doi.org/10.1016/0001-6160(89)90253-8
- R. Bordia and R. Raj, "Sintering Behavior of Ceramic Films Constrained by a Rigid Substrate," J. Am. Ceram. Soc., 68 [6] 287-92 (1985). https://doi.org/10.1111/j.1151-2916.1985.tb15227.x
- G. W. Scherer and T. Garino, "Viscous Sintering on a Rigid Substrate," J. Am. Ceram. Soc., 68 [4] 216-20 (1985). https://doi.org/10.1111/j.1151-2916.1985.tb15300.x
- C. H. Hsueh, "Sintering of a Ceramic Film on a Rigid Substrate," Scripta Metall., 19 [10] 1213-17 (1985). https://doi.org/10.1016/0036-9748(85)90240-6
- R. Zuo, E. Aulbach, and J. Rodel, "Viscous Poisson's Coefficient Determined by Discontinuous Hot Forging," J. Mater. Res., 18 [9] 2170-76 (2003). https://doi.org/10.1557/JMR.2003.0303
- P. Z. Cai, D. J. Green, and G. L. Messing, "Constrained Densification of Alumina/Zirconia Hybrid Laminates, I: Experimental Observations of Processing Defects," J. Am. Ceram. Soc., 80 [8] 1929-39 (1997). https://doi.org/10.1111/j.1151-2916.1997.tb03075.x
- P. Z. Cai, D. J. Green, and G. L. Messing, "Constrained Densification of Alumina/Zirconia Hybrid Laminates, II: Viscoelastic Stress Computation," J. Am. Ceram. Soc., 80 [8] 1940-48 (1997). https://doi.org/10.1111/j.1151-2916.1997.tb03076.x
- T. V. Gestel, D. Sebold, W. A. Meulenberg, and H.-P. Buchkremer, "Development of Thin-Film Nano-Structured Electrolyte Layers for Application in Anode-Supported Solid Oxide Fuel Cells," Solid State Ionics, 179 [11-12] 428-37 (2008). https://doi.org/10.1016/j.ssi.2008.02.010
- T. V. Gestel, D. Sebold, and H. P. Buchkremer, "Processing of 8YSZ and CGO Thin Film Electrolyte Layers for Intermediate- and Low-Temperature SOFCs," J. Eur. Ceram. Soc., 35 [5] 1505-15 (2015). https://doi.org/10.1016/j.jeurceramsoc.2014.11.017
- Y. Pan, J. Zhu, M. Z. Hu, and E. A. Payzant, "Processing of YSZ Thin Films on Dense and Porous Substrates," Surf. Coat. Technol., 200 [5-6] 1242-47 (2005). https://doi.org/10.1016/j.surfcoat.2005.07.083
- K. Mehta, R. Xu, and A. V. Virkar, "Two-Layer Fuel Cell Electrolyte Structure by Sol-Gel Processing," J. Sol-Gel Sci. Technol., 11 [2] 203-7 (1998). https://doi.org/10.1023/A:1008605816691
- H. Lin, C. Ding, K. Sato, Y. Tsutai, H. Ohtaki, M. Iguchi, C. Wada, and T. Hashida, "Preparation of SDC Electrolyte Thin Films on Dense and Porous Substrates by Modified Sol-Gel Route," Mater. Sci. Eng., B, 148 [1-3] 73-6 (2008). https://doi.org/10.1016/j.mseb.2007.09.039
- C. Peters, A. Weber, B. Butz, D. Gerthsen, and E. Ivers-Tiffee, "Grain-Size Effects in YSZ Thin-Film Electrolytes," J. Am. Ceram. Soc., 92 [9] 2017-24 (2009). https://doi.org/10.1111/j.1551-2916.2009.03157.x
- K. Lee, J. Kang, S. Jin, S. Lee, and J. Bae, "A Novel Sol-Gel Coating Method for Fabricating Dense Layers on Porous Surfaces Particularly for Metal-Supported SOFC Electrolyte," J. Int. Hydrogen Energy, 42 [9] 6220-30 (2017). https://doi.org/10.1016/j.ijhydene.2016.12.004
- L. C. De Jonghe, C. P. Jacobson, and S. J. Visco, "Supported Electrolyte Thin Film Synthesis of Solid Oxide Fuel Cells," Annu. Rev. Mater. Res., 33 [1] 169-82 (2003). https://doi.org/10.1146/annurev.matsci.33.041202.103842
- I.-Y. Kim, M. Biswas, J. Hong, K. J. Yoon, J.-W. Son, J.-H. Lee, B.-K. Kim, H.-J. Je, and H.-W. Lee, "Effect of Internal and External Constraints on Sintering Behavior of Thin Film Electrolytes for Solid Oxide Fuel Cells (SOFCs)," Ceram. Int., 40 [8] 13131-38 (2014). https://doi.org/10.1016/j.ceramint.2014.05.016
- R. Tomov, M. Krauz, J. Jewulski, S. Hopkins, J. Kluczowski, D. Glowacka, and B. A. Glowacki, "Direct Ceramic Inkjet Printing of Yttria-Stabilized Zirconia Electrolyte Layers for Anode-Supported Solid Oxide Fuel Cells," J. Power Sources, 195 [21] 7160-67 (2010). https://doi.org/10.1016/j.jpowsour.2010.05.044
- K. Miller, F. Lange, and D. B. Marshall, "The Instability of Polycrystalline Thin Films: Experiment and Theory," J. Mater. Res., 5 [1] 151-60 (1990). https://doi.org/10.1557/JMR.1990.0151
- E.-O. Oh, Thin Film Solid Oxide Fuel Cells (SOFCs) Fabricated by Chemical Solution Deposition (CSD) Route for Intermediate Temperature Operation, Ph.D. Thesis, Inha University, Incheon, 2012.
- X. Xu, C. Xia, S. Huang, and D. Peng, "YSZ Thin Films Deposited by Spin-Coating for IT-SOFCs," Ceram. Int., 31 [8] 1061-64 (2005). https://doi.org/10.1016/j.ceramint.2004.11.005
- Y.-Y. Chen and W.-C. J. Wei, "Processing and Characterization of Ultra-Thin Yttria-Stabilized Zirconia (YSZ) Electrolytic Films for SOFC," Solid State Ionics, 177 [3-4] 351-57 (2006). https://doi.org/10.1016/j.ssi.2005.10.010
- D. Perednis and L. J. Gauckler, "Solid Oxide Fuel Cells with Electrolytes Prepared via Spray Pyrolysis," Solid State Ionics, 166 [3-4] 229-39 (2004). https://doi.org/10.1016/j.ssi.2003.11.011
- D. Young, A. Sukeshini, R. Cummins, H. Xiao, M. Rottmayer, and T. Reitz, "Ink-Jet Printing of Electrolyte and Anode Functional Layer for Solid Oxide Fuel Cells," J. Power Sources, 184 [1] 191-96 (2008). https://doi.org/10.1016/j.jpowsour.2008.06.018
- W. Bao, G. Zhu, J. Gao, and G. Meng, "Dense YSZ Electrolyte Films Prepared by Modified Electrostatic Powder Coating," Solid State Ionics, 176 [7-8] 669-74 (2005). https://doi.org/10.1016/j.ssi.2004.10.023
Cited by
- Protonic ceramic electrolysis cells for fuel production: a brief review vol.57, pp.5, 2020, https://doi.org/10.1007/s43207-020-00059-4
- Naturally diffused sintering aid for highly conductive bilayer electrolytes in solid oxide cells vol.7, pp.40, 2019, https://doi.org/10.1126/sciadv.abj8590
- 3D-printed cobalt-rich tungsten carbide hierarchical electrode for efficient electrochemical ammonia production vol.58, pp.6, 2019, https://doi.org/10.1007/s43207-021-00142-4