• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2001년도 추계학술발표회
• /
• pp.115-119
• /
• 2001

Contaminant retardation factor is derived from the colloidal and contaminant transport equations for a four-phase porous medium: an aqueous phase, two mobile colloidal phases, and a solid matrix. It is assumed that the contaminant sorption to solid matrix and colloidal particles and the colloidal deposition on solid matrix follow the linear isotherms. The behavior of the contaminant retardation factor in response to the change of model parameters is examined employing the experimental data of Magee et al. (1991) and Jenkins and Lion (1993). In the four-phase system, the contaminant retardation factor is determined by both the contaminant association with solid matrix and colloidal particles and the colloidal deposition on solid matrix. The contaminant mobility is enhanced when the affinity of contaminants to mobile colloids increases. In addition, as the affinity of colloids to solid matrix decreases, the contaminant mobility increases.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.236-239
• /
• 2008

In the present study, a transient glass particle distribution in a stirred solid/liquid mixer was investigated using computational fluid dynamics(CFD). The flow patterns and solid concentaration distriburion in a solid/liquid mixer formed by pitched paddle and baffles were predicted. The numerical results were compared to experimental data from the available literature. Eulerian multi-phase model was used to investigate the influence of the density of solid particle on the same impeller speed. A good agreement was obtained between the experimental data and simulation results.

• 소성∙가공
• /
• 제6권3호
• /
• pp.239-249
• /
• 1997

The behaviour of alloys in the semi-solid state strongly depends on the imposed stress state and on the morphology of the phase which can vary from dendritic to globular. To optimal net shape forging of semi-solid materials, it is important to investigate for filling phenomena in forging process of arbitrarily shaped dies. To produce a automotive part which has good mechanical property, the filling pattern according to die velocity and solid fraction distribution has to be estimated for arbitrarily shaped dies. Therefore, the estimation of filling characteristic in the forging simulation with arbitrarily shaped dies of semi-solid materials are calculated by finite element method with proposed algorithm. The proposed theoretical model and a various boundary conditions for arbitrarily shaped dies is investigated with the coupling calculation between the liquid phase flow and the solid phase deformation. The simulation process with arbitrarily shaped dies is performed to the isothermal conditions of two dimensional problems. To analysis of forging process by using semi-solid materials, a new stress-strain relationship is described, and forging analysis is performed by viscoelastic model for the solid phase and the Darcy's law for the liquid flow. The calculated results for forging force and filling limitations will be compared to experimental data. The filling simulation of simple products performed with the uniform billet temperature(584$^{\circ}C$) from the induction heating by the commercial package MAGMAsoft. The initial step of computation is the touching of semi-solid material with the end of die gate and the initial concept of proposed system just fit with the capability of MAGMAsoft.

• KSBB Journal
• /
• 제16권5호
• /
• pp.500-504
• /
• 2001

Sepharose CL-6B 의 기능기를 aldehyderl로 활성화시킨 후 urokinase와 공유결합 시켜 고정화하는 방법을 6mL 규모에서 250 mL 규모로 스케일업한 결과 고정화 수율 및 고정화 된 UK에 의한 절단반응 수율 등에서 스케일업 전후의 결과에 차이가 없었다. 따라서 위의 고정화 방법의 scale-up 효능은 매우 우수한 것으로 나타났다. hGH와 GST 절편으로 구성된 융합 단백질의 고정화 UK 컬럼에 의한 절단 반응 후 용출액의 pH를 3.5로 낮춤으로써 이물질들을 침전시키고 이를 expanded bed chromatography zf칼럼에 통과시킨 결과, 이 물질들의 제거와 hGH 단량체의 흡착분리가 동시에 이루어졌다. 흡착된 단량체는 NaCL에의해 용출되었으며 이 단계의 수율은 거의 100%이었다. 따라서 칼럼에 의한 절단 반응과 t산 침전에 의한 이물질 침전 바능, EBA에 의한 이물질 제거 및 단량체 회수 반응을 연속적으로 진행할 수 있는 기초를 제시하였다. 또한 고정화된 UK는 guanidine HCl(6 M)을 이용하여 unfolding 시키고 이를 세적하여 refolding 시킨 결과 20회의 반복적인 처리 후에도 초기 활성의 약 80% 수준을 유지하였다. 이는 UK 가 공유결합된 상태에서 solid-phase refolding이 가능하다는 증거이며, 고정화 효소 칼럼의 수명을 크게 향상시켜 경제성을 확보하는 방안으로 이용될 것으로 기대된다.

• 한국자기공명학회논문지
• /
• 제2권1호
• /
• pp.24-32
• /
• 1998

Drawn polyethylene was studied by 13C cross polarization magic angle spinning techniques. Solid-solid phase transition from orthorhombic to monoclinic crystalline phase by drawing was observed. In addition, using a synchronized magic angle spinning 2 dimension technique, we confirmed that macroscopic ordering of the polyethylene was produced by drawing.

• 한국세라믹학회지
• /
• 제31권4호
• /
• pp.443-447
• /
• 1994

Compacts of mixed SiO2-Si powder were liquid phase sintered at 145$0^{\circ}C$ for up to 60 min in a hydrogen atmosphere. In contrast to the conventional microstructures of liquid phase sintered materials, the specimens showed that the solid phase of SiO2 formed a matrix while the liquid phase of Si was the dispersed in the solid matrix. The dispersion of liquid Si pockets was attributed to the high wetting angle of liquid Si on solid SiO2. Because of relatively high solubility of SiO2 in liquid Si at 145$0^{\circ}C$, SiO2 particles accommodated their shape via a solution-reprecipitation process. The liquid Si pockets grew by coalescing with their neighbour pockets. In the latter stage of the sintering, plate-shape grains appeared in the liquid Si pockets. The grains were SiO2 phase precipitated from the liquid Si which was oversaturated with oxygen during cooling to room temperature. By the formation and subsequent removal of the gaseous SiO phase due to the reaction between SiO2 and Si, the specimens became porous.

• 대한핵의학회지
• /
• 제25권2호
• /
• pp.207-210
• /
• 1991

The purpose of this study was to examine the existence of a lag phase of gastric emptying of solid meals. We studied solid phase gastric emptying in 26 normal subject using continuous data aquisition for 30 minutes. Each ingested a 300 g meal containing $^{99m}Tc-labeled$ scrambled egg (solid 150g, milk 150 ml). Lag phase was determined by 1) inspection of the gastric emptying curve 2) time to a 2% decrease in stomach activity 3) the time of visual appearance of duodenal activity on computer image We concluded that solid meal lag phase exist.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2006년 제4회 한국유체공학학술대회 논문집
• /
• pp.471-474
• /
• 2006

The Mixer is apparatus that help precipitation or an inhomogeneous distribution of various phases to be mixed and that user makes necessary material mixing one or the other. Mainly the mixer which is used from chemical and food industry is very important system in engineering that mixes the material. The inside flow of the mixer under the actual states which put a basis in flow of the fluid is formed rotation of the impeller. The inside flow of impeller will be caused by various reasons change with shape of impeller, number of rotation, mixing material and flow pattern of free surface etc. Also mixer study depended in single-phase flow and experimental research. So the numerical analysis of flow mixing solid-fluid particle is simulated. It is become known, that the case where agitator inside working fluid includes the solid particle the sinkage reverse which the solid particle has decreases an agitation efficiency. From the research which it sees the hazard solid which examines the effect where the change of the sinkage territory which it follows agitation number of revolution and diameter of the particle goes mad to an agitator inside flow distribution - numerical analysis the inside flow distribution of liquid state with Eulerian Two-Phase Method.

• Archives of Pharmacal Research
• /
• 제27권8호
• /
• pp.811-815
• /
• 2004

Coumarin and its derivatives occur widely in nature. Many attempts were made for synthesis of various coumarin derivatives because of their interesting biological activities. In this study, solid phase synthetic approach of 3-(4-hydroxyphenyl)coumarin was achieved for combinatorial synthesis of substituted 3-phenylcoumarin analogues. Starting from 4-hydroxyphenylacetic acid methyl ester, release of 3-(4-hydroxypnehyl)coumarin from polymer support was accom-plished.

• The Korean Journal of Ceramics
• /
• 제5권3호
• /
• pp.205-210
• /
• 1999

The thermodynamic properties and phase diagram of the$ PbO-ZrO_2$ system have been critically assessed using the Thermo-Calc program. Excess Gibbs energies were expressed by Redlich-Kister polynomials for the solid phases, by the two-sublattice ionic liquid model for the liquid phase and by the compound energy model for the solid solution phase. All solid phases were treated as stoichimetric compounds.