• Journal of Ginseng Research
• /
• 제45권1호
• /
• pp.1-21
• /
• 2021

Panax species have gained numerous attentions because of their various biological effects on cardiovascular, kidney, reproductive diseases known for a long time. Recently, advanced analytical methods including thin layer chromatography, high-performance thin layer chromatography, gas chromatography, high-performance liquid chromatography, ultra-high performance liquid chromatography with tandem ultraviolet, diode array detector, evaporative light scattering detector, and mass detector, two-dimensional high-performance liquid chromatography, high speed counter-current chromatography, high speed centrifugal partition chromatography, micellar electrokinetic chromatography, high-performance anion-exchange chromatography, ambient ionization mass spectrometry, molecularly imprinted polymer, enzyme immunoassay, 1H-NMR, and infrared spectroscopy have been used to identify and evaluate chemical constituents in Panax species. Moreover, Soxhlet extraction, heat reflux extraction, ultrasonic extraction, solid phase extraction, microwave-assisted extraction, pressurized liquid extraction, enzyme-assisted extraction, acceleration solvent extraction, matrix solid phase dispersion extraction, and pulsed electric field are discussed. In this review, a total of 219 articles published from 1980 to 2018 are investigated. Panax species including P. notoginseng, P. quinquefolius, sand P. ginseng in the raw and processed forms from different parts, geographical origins, and growing times are studied. Furthermore, the potential biomarkers are screened through the previous articles. It is expected that the review can provide a fundamental for further studies.

• 한국환경과학회지
• /
• 제24권12호
• /
• pp.1569-1582
• /
• 2015

The analytical method for 16 organophosphorus pesticides was developed in this study. The 16 organophosphorus pesticides were analyzed by liquid chromatography-tandem mass spectrometry (LC/MS/MS) using on-line solid phase extraction (on-line SPE) with PLRP- S cartridge. Analysis of all analytes in the MS/MS was processed in the electrospray ioni-zation (ESI) positive mode. They are Azinphos ethyl, Chlorfenvinphos, Ethion, Famphur, Phosmet, Phosphamidon, Terbufos, Aspon, Chlorpyrifos-methyl, Crotoxyphos, Dichlofenthi-on, Dicrotophos, Fonofos, Thionazin, Dimethoate and Iprobenfos. Limits of detection (LODs) and Limits of quantification(LOQs) were obtained as 0.8~2.0 ng/L and 2.6~6.4 ng/L, respectively. All compounds were not detected at the 8 sampling points of the raw water and clean water.

• 한국물환경학회지
• /
• 제32권6호
• /
• pp.600-627
• /
• 2016

Korea is one of the countries with a large veterinary antibiotics market, although antimicrobial resistance in bacteria is becoming a serious issue in many countries. The Korean government started to take interest in estimating the effects of livestock manure on rivers and agricultural soils and in monitoring of heavy metals, organic pollutants and antibiotics in the ambient water and soil. In this paper, pre-treatment methods to separate the selected antibiotics from solid samples were reviewed. It is essential to select an efficient and appropriate procedure for pre-treatment due to the high proportion of proteins and organics in biosolid samples. Pre-treatment consists of extraction followed by clean-up. Initially, homogenized samples were extracted by sonication, mechanical agitation or pressurized liquid extraction with methanol/acetonitrile/water mixture under acidic/basic conditions depending on the compound. However, aminoglycosides and colistin were extracted with 5% trichloroacetic acid and HCl, respectively. Since the ${\beta}-lactams$ are easily decomposed in acidic and basic conditions, they were extracted in neutral pH. Filtration with a membrane (pore size, $0.2{\mu}m$) or solid phase extraction with HLB and methanol, as eluents, was normally applied for the clean-up. At least, three different pre-treatment procedures should be adopted to screen all the selected antibiotics in solid samples.

• 대한환경공학회지
• /
• 제35권7호
• /
• pp.485-494
• /
• 2013

본 연구에서는 어류에서 16종의 과불화합물을 분석하기 위한 최적 전처리법을 확립하고자 이온쌍 추출법(IPE)과, 액-액 추출법(LLE), 고체상 추출법(SPE), 이온쌍 + 고체상 추출법(IPE + SPE) 각각에 대하여 내부표준물질의 주입 시기를 달리하여 회수율을 비교하였다. 내부표준물질을 추출 전에 주입하는 IPE-before법이 가장 효율적인 전처리법으로 평가되었다. 추가로 RPM 및 pH 테스트를 통해 IPE-before법을 적용한 분석 전처리 효율을 더 개선할 수 있었다. 확립된 전처리법을 이용해 국내 마트에서 구입한 33개의 어류 및 어류의 간과 내장시료에서 과불화합물을 분석하였다. 16종 과불화합물의 검출범위는 ND~1.67 ng/g이었으며, 검출빈도는 100%로 나타났다. 어류의 근육부와 간, 내장을 비교 모니터링 한 결과, 간(17.8 ng/g) > 내장(13.3 ng/g) > 근육부(1.67 ng/g) 순으로 과불화합물이 검출됨을 확인하였다. 국외 선행연구 결과와 비교하였을 때, 본 연구에서의 어류의 농도는 비슷하거나 낮게 검출되었다.

• 한국식품영양학회지
• /
• 제17권4호
• /
• pp.412-419
• /
• 2004

쇠고기 엑기스 분말로부터 방사선 조사 휘발성 화합물의 검출에 의한 새로운 검지방법의 개발을 위한 기초 자료를 마련하고자 S-PD 법, S-CD 법, P&T 법 및 LLCE 법 등 4종의 방법을 대상으로 휘발성 화합물의 추출을 위한 최적의 방법을 선정하고자 하였다. 그 결과 쇠고기 엑기스 분말로부터 탄화수소류, 알데히드류, 케톤류, 알콜류, 함황화합물류, 함질소화합물류, 방향족화합물류, 테르펜류, 푸란류 및 기타 화합물류로 구성된 106종의 휘발성 화합물이 검출되었으며, 이 중 S-PD법에 의해 62종의 화합물이 검출됨으로써 가장 많은 화합물을 나타내었고, 다음으로 P&T 법(43종), LLCE 법(38종) 및 S-CD 법(30종) 순이었다. S-PD 법은 RI 1200 이상의 휘발성이 약하며 분자량이 높은 화합물에 대한 검출능이 높았고, P&T 법은 RI 1200 이하의 화합물의 검출능이 높은 경향을 나타냄으로서, 위 두 방법은 상호보완적인 경향을 나타내었다. 한편 S-CD법에 의해 검출된 화합물은 3종을 제외하고 S-PD 법에 의해서도 검출 가능하였으며, LLCE 법의 경우는 5종의 화합물을 제외하고 S-PD 법과 P&T법을 병용할 경우 모두 검출 가능한 화합물로 구성되어 있었다. 따라서 비극성 fiber(PDMS/DVB)를 사용한 SPME 법과 P&T 법을 병용하는 방법이 쇠고기 엑기스 분말의 휘발성 화합물을 추출하기 위한 최적의 방법으로 선정되었다.

• 한국식품과학회지
• /
• 제50권5호
• /
• pp.474-479
• /
• 2018

포도의 안토사이아닌과 페놀 화합물의 고효율 추출을 위해 초음파 추출방법을 이용하여 반응표면분석법으로 조건을 최적화하였다. Box-Behnken design을 사용하여 시료-용매 비율, 추출시간, 초음파의 진폭을 독립변수로 하였으며, 총 안토사이아닌과 총 페놀 함량을 최대로 하는 추출조건을 최적화하였다. 총 안토사이아닌 함량은 3가지 독립변수가 유의적인 요인으로 시료-용매 비율이 증가할수록, 추출시간과 진폭은 감소할수록 총 안토사이아닌 함량이 증가하는 경향을 보였으나, 총 페놀 함량은 3가지 독립변수 모두 유의적인 요인이 아닌 것으로 나타났다. 총 안토사이아닌과 총 페놀 함량의 예측 값과 실측 값이 유사하여 본 연구에서 예측된 회귀식을 신뢰할 수 있음을 보여주었다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.259-263
• /
• 2001

There are several steps such as slicing, lapping, chemical etching and mechanical polishing in the silicon wafer production process. The chemical etching step is necessary to remove damaged layer caused In the slicing and lapping steps. The typical etching liquor is the acid mixture comprising nitric acid, acetic acid and hydrofluoric acid. At present, the waste acid is treated by a neutralization method with a high alkali cost and balky solid residue. A solvent extraction method is applicable to separate and recover each acid. Acetic acid is first separated from the waste liquor using 2-ethlyhexyl alcohols as an extractant. Then, nitric acid is recovered using TBP(Tri-butyl phosphate) as an extractant. Finally hydrofluoric acid is separated with the TBP solvent extraction. The expected recovered acids in this process are 2㏖/l acetic acid, 6㏖/1 nitric acid and 6㏖/l hydrofluoric acid. The yields of this process are almost 100% for acetic acid and nitric acid. On the other hand, it is important to recover and reuse the metal values contained in various industrial wastes in a viewpoint of environmental preservation. Most of industrial products are made through the processes to separate impurities in raw materials, solid and liquid wastes being necessarily discharged as industrial wastes. Chemical methods such as solvent extraction, ion exchange and membrane, and physical methods such as heavy media separation, magnetic separation and electrostatic separation are considered as the methods for separation and recovery of the metal values from the wastes. Some examples of the application of solvent extraction to the treatment of wastes such as Ni-Co alloy scrap, Sm-Co alloy scrap, fly ash and flue dust, and liquid wastes such as plating solution, the rinse solution, etching solution and pickling solution are introduced.

• Bulletin of the Korean Chemical Society
• /
• 제32권8호
• /
• pp.2637-2642
• /
• 2011

A new ultrasonic-assisted micellar extraction and cloud-point pre-concentration method was developed for the determination of major saikosaponins, namely saikosaponins -A, -C and -D, in Radix Bupleuri by high performance liquid chromatography with evaporative light scattering detection (HPLC-ELSD). The non-ionic surfactant Genapol X-080 (oligoethylene glycol monoalkyl ether) was chosen as the extraction additive and parameters affecting the extraction efficiency were optimized. The highest yield was obtained with 10% (w/v) Genapol X-080, a liquid/solid ratio of 200:1 (mL/g) and ultrasonic-assisted extraction for 40 min. In addition, the optimum cloud-point pre-concentration was reached with 10% sodium sulfate and equilibration at $60^{\circ}C$ for 30 min. Separation was achieved on an Ascentis Express C18 column (100 ${\times}$ 4.6 mm i.d., 2.7 ${\mu}M$) using a binary mobile phase composed of 0.1% acetic acid and acetonitrile. Saikosaponins were detected by ELSD, which was operated at a $50^{\circ}C$ drift tube temperature and 3.0 bar nebulizer gas ($N_2$) pressure. The water-based solvent modified with Genapol X-080 showed better extraction efficiency compared to that of the conventional solvent methanol. Recovery of saikosaponins ranged from 93.1 to 101.9%. An environmentally-friendly extraction method was successfully applied to extract and enrich major saikosaponins in Radix Bupleuri.

• 상하수도학회지
• /
• 제18권5호
• /
• pp.638-648
• /
• 2004

In many drinking water treatment plants, chlorination process is one of the main techniques used for the disinfection of water. This disinfecting treatment leads to the formation of haloacetic acid (HAAs). In this study, headspace solid-phase microextraction (HS-SPME) was studied as a possible alternative to liquid-liquid extraction for the analysis of HAAs in drinking water. The method involves direct derivatization of the acids to their methyl esters without methyl tert-butyl ether (MTBE) extraction, followed by HS-SPME with a $2cm-50/30{\mu}m$ divinylbenzene/carboxen/polydimethylsiloxane fiber. The effects of experimental parameters such as selection of SPME fiber, the volume of sulphuric acid and methanol, derivatization temperature and time, the addition of salts, extraction temperature and time, and desorption time on the analysis were investigated. Analytical parameters such as linearity, repeatability and limit of detection were also evaluated. The $2cm-50/30{\mu}m$-divinylbenzene/carboxen/polydimethylsiloxane fiber, sulphuric acid of 1ml, methanol of 3ml, derivatization temperature of $50^{\circ}C$ derivatization time of 2hrs, sodium chloride salt of 10g, extraction time of 30 minutes, extraction temperature of $20^{\circ}C$ and desorption time of 1 minute at $260^{\circ}C$ were selected as the optimal experimental conditions for the analysis of HAAs. The linearities ($r^2$), relative standard deviations (%RSD) and limits of detection (LOD) for HAAs were 0.9978~0.9991, 1.1~9.8% and $0.05{\sim}0.2{\mu}g/l$, respectively.

• Journal of Dairy Science and Biotechnology
• /
• 제33권1호
• /
• pp.27-34
• /
• 2015

본 연구에서는 dispersive-SPE를 사용하여 간편하고, 신속하며, 경제적인 우유 내 19종 잔류농약의 동시 다성분 분석법을 설정하고자 하였다. Liquid-liquid partitioning method와 low-temperature cleanup method를 적용한 추출방법과 PSA 및 PSA + C18의 sorbent가 사용된 dispersive-SPE를 사용한 정제방법을 비교 실험하였으며, GC/MS의 선택이온 검색법(selected ion monitoring, SIM)으로 정량 분석하였다. matrix-matched standards와 matrix-free standards를 사용하여 분석방법의 matrix enhancement effect를 확인하였고, 분석방법 설정을 위한 비교실험의 결과, low-temperature cleanup 방법으로 추출하여 dispersive-SPE(PSA + C18)로 정제하는 방법이 시료 추출물의 간섭물질을 제거하는데 가장 효과적이고, 첨가한 $1{\mu}g/mL$에 대한 개별 농약 성분의 회수율 또한 전체적으로 가장 높은 수준을 나타내었으며, 모든 농약 성분의 RSD(%)가 20% 이하로서 기준에 적합한 재현성을 나타내었다.