• 한국가시화정보학회지
• /
• 제15권2호
• /
• pp.21-25
• /
• 2017

If a liquid droplet evaporates on a solid substrate, when it completely dries, it leaves a peculiar pattern, which depends on the composition of the liquid. Not only a single component liquid but also complex liquids are studied for a different purpose. In particular, a binary mixture droplet has been widely studied and used for an ink-jet printing technology. In this study, we focus on investigating to visualize the internal flow field of an ethanol-water mixture by varying a concentration ratio between two liquids. We measure the in-plane velocity vector fields and vorticities. We believe that this fundamental study about the internal flow field provides a basic idea to understand the dried pattern of the binary mixture droplet.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제37회 추계학술대회논문집
• /
• pp.821-826
• /
• 2011

액체로켓 엔진의 개발을 위한 터보펌프+가스발생기(TP+GG) 연계시험을 수행하였으며, 본 시험결과와 Flowmaster를 이용한 엔진 시동해석 결과를 비교함으로써 시동해석 방법의 검증을 수행하였다. 이로부터 엔진 시동해석에 있어서, 초기 터빈의 압력비를 계산하는 방법을 개선하였으며, 특히 시동 초기의 터빈 출구 온도가 시동 해석의 오차에 미치는 영향을 확인하였다.

• 한국광학회지
• /
• 제28권5호
• /
• pp.221-228
• /
• 2017

프리즘 분광계를 사용하여 액체 상태와 고체 상태의 혼합 폴리머(NOA61, NOA84) 굴절률을 측정하였다. 먼저 속이 빈 작은 프리즘을 제작하고 UV (ultra-violet) 에폭시를 채운 다음 프리즘의 꼭지각과 최소 편향각을 측정하여 굴절률을 측정하였다. 고체 상태의 폴리머는 속이 빈 프리즘에 추가 구조물을 넣고 UV 에폭시를 경화하여 고체 폴리머가 채워진 프리즘을 제작하고 굴절률을 측정하였다. 액체 상태나 고체 상태인 경우 모두, 두 종류의 에폭시를 섞어서 혼합 폴리머를 만들고 혼합비를 조절하면서 굴절률을 측정한 결과 혼합비에 비례하는 굴절률 측정값을 얻었다. 이러한 결과는 UV 에폭시를 사용한 원통형 이중 미세 렌즈배열의 초점거리를 조절할 수 있는 방법을 제공한다.

• 한국전기전자재료학회논문지
• /
• 제37권4호
• /
• pp.445-450
• /
• 2024

The expansion of lithium-ion battery usage beyond portable electronic devices to electric vehicles and energy storage systems is driven by their high energy density and favorable cycle characteristics. Enhancing the stability and performance of these batteries involves exploring solid electrolytes as alternatives to liquid ones. While sulfide-based solid electrolytes have received significant attention for commercialization, research on amorphous-phase glass solid electrolytes in oxide-based systems remains limited. Here, we investigate the glass transition temperatures and sintering behaviors by changing the molecular ratio of Li₂O/B₂O₃ in borate glass comprising Li₂O-B₂O₃-Al₂O₃ system. The glass transition temperature is decreasing as increasing the amount of Li₂O. When we sintered at 450℃, just above the glass transition temperature, the samples did not consolidate well, while the proper sintered samples could be obtained under the higher temperature. We successfully obtained the borate glass ceramics phases by melt-quenching method, and the sintering characteristics are investigated. Future studies could explore optimizing ion conductivity through refining processing conditions, adjusting the glass former-to-modifier ratio, and incorporating additional Li salt to enhance the ionic conductivity.

• 한국추진공학회지
• /
• 제17권5호
• /
• pp.132-139
• /
• 2013

액체 추진제 로켓이 큰 추력과 특히 무게 대비 추력 때문에 세계적으로 널리 사용되고 있다. 액체 추진기관은 기계적으로 복잡한 시스템이지만 발사 성공률은 고체 추진기관과 거의 비슷하게 나타나고 있다. 일반적으로 액체추진기관은 성숙된 기술이지만, 우주 탐험에 대한 새로운 관심은, 추력과 수명요구의 다양성에 따른 생산과 사용의 간편성, 그리고 설계 마진 등을 갖는 새로운 엔진 종류의 개발을 필요로 하고 있다.

• 한국분말재료학회지
• /
• 제27권6호
• /
• pp.468-476
• /
• 2020

The bone cement used for vertebroplasty must be sufficiently injectable. The introduction of granules reduces the amount of liquid required for liquefaction, implying that higher fluidity is achieved with the same amount of liquid. By employing β-tricalcium phosphate granules with an average diameter of 50 ㎛, changes in injectability are observed based on the paste preparation route and granular fraction. To obtain acceptable injectability, phase separation must be suppressed during injection, and sufficient capillary pressure to combine powder and liquid must work evenly throughout the paste. To achieve this, the granules should be evenly distributed. Reduced injection rates are observed for dry mixing and excessive granular content, owing to phase separation. All these correspond to conditions under which the clustered granules weakened the capillary pressure. The injected ratio of the paste formed by wet mixing displayed an inverted U-type shift with the granular fraction. The mixture of granules and powder resulted in an increase in the solid volume fraction, and a decrease in the liquid limit. This resulted in the enhancement of the liquidity, owing to the added liquid. It is inferred that the addition of granules improves the injectability, provided that the capillary pressure in the paste is maintained.

• KSBB Journal
• /
• 제28권1호
• /
• pp.48-53
• /
• 2013

Pretreatment of wastepaper using aqueous glycerol was investigated to enhance the enzymatic hydrolysis. The effects of four factors (solid/liquid ratio, glycerol concentration, acid concentration, and reaction time) on the dissolution yield, the removal of cellulose, hemicellulose and lignin, and the enzymatic digestibility were examined at $150^{\circ}C$. The 1/8 of solid/liquid was determined to perform the reaction uniformly, and the 93% of glycerol concentration was found to be a minimum concentration to conduct the reaction under atmospheric pressure. Also, it was found that the acid concentration and reaction time were strongly related to the dissolution yield and the removal of cellulose, hemicellulose and lignin, but moderately to the enzymatic digestibility. At an optimum condition of $150^{\circ}C$, 1 h and 1% acid concentration, 56% and 49% of hemicellulose and lignin, respectively, were removed, while only 4% of cellulose was removed. The enzymatic digestibility at this condition was 86%, meaning that 83% of the glucan present in the initial substrate was converted to glucose. Compared to glycerol with ethylene glycol as a pretreatment solvent, glycerol is much cheaper than ethylene glycol, but ethylene glycol is superior to glycerol in delignification.

• Korean Chemical Engineering Research
• /
• 제53권2호
• /
• pp.216-223
• /
• 2015

The present work explores the potential of wet air oxidation (WAO) for pretreatment of mixed lignocellulosic biomass to enhance enzymatic convertibility. Rice husk and wheat straw mixture (1:1 mass ratio) was used as a model mixed lignocellulosic biomass. Post-WAO treatment, cellulose recovery in the solid fraction was in the range of 86% to 99%, accompanied by a significant increase in enzymatic hydrolysis of cellulose present in the solid fraction. The highest enzymatic conversion efficiency, 63% (by weight), was achieved for the mixed biomass pretreated at $195^{\circ}C$, 5 bar, 10 minutes compared to only 19% in the untreated biomass. The pretreatment under the aforesaid condition also facilitated 52% lignin removal and 67% hemicellulose solubilization. A statistical design of experiments on WAO process conditions was conducted to understand the effect of process parameters on pretreatment, and the predicted responses were found to be in close agreement with the experimental data. Enzymatic hydrolysis experiments with WAO liquid fraction as diluent showed favorable results with sugar enhancement up to $10.4gL^{-1}$.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.53-53
• /
• 2008

Piezoelectric transformers have been widely used such as DC-DC convertor, invertor, Ballast, etc. Because, the y have some merits compared with electro-magnetic transformers such as step-up ratio, high efficiency, small size and lg hit weight, etc. Piezoelectric transformer require high electromechanical coupling factor kp in order to induce a large out put power in proportional to applied electric field. And also, high mechanical quality factor Qm is required to prevent mechanical loss and heat generation. In general, PZT system ceramics should be sintered at high temperatures between 1200 and $1300^{\circ}C$ in order to obtain complete densification. Accordingly, environmental pollution due to its PbO evaporation. Hence, to reduce its sintering temperature, various kinds of material processing methods such as hot pressing, high energy mill, liquid phase sintering, and using ultra fine powder have been performed. Among these methods, liquid phase sintering is basically an effective method for aiding densification at low temperature. In this study, In order to comparis on low temperature sintering and solid state sintering piezoelectric transformers, rosen type transformers were fabricated u sing two PZT ceramics compositions and their electrical properties were investigated.

• Journal of Welding and Joining
• /
• 제23권6호
• /
• pp.99-105
• /
• 2005

The mixing ratio effect of the GTD-111(base metal) powder and the GNI-3 (Ni-l4Cr-9.5Co-3.5Al-2.5B) powder on TLP(Transient Liquid Phase) bonding phenomena and mechanism was investigated. At the mixing ratio of the base metal powder under $50wt\%$, the base metal powders fully melted at the initial time and a large amount of the base metal near the bonded interlayer was dissolved by liquid inter metal. Liquid insert metal was eliminated by isothermal solidification which was controlled by the diffusion of B into the base metal. The solid phases in the bonded interlayer grew epitaxially from the base metal near the bonded interlayer inward the insert metal during the isothermal solidification. The number of grain boundaries farmed at the bonded interlayer corresponded with those of base metal. At the mixing ratio above $60wt\%$, the base metal powder melted only at the surface of the powder and the amount of the base metal dissolution was also less at the initial time. Nuclear of solids firmed not only from the base metal near the bonded interlayer but also from the remained base metal powder in the bonded interlayer. Finally, the polycrystal in the bonded interlayer was formed when the isothermal solidification finished. When the isothermal solidification was finished, the contents of the elements in the boned interlayer were approximately equal to those of the base metal. Cr-W borides and Cr-W-Ta-Ti borides formed in the base metal near the bonded interlayer. And these borides decreased with the increasing of holding time.