• KEPCO Journal on Electric Power and Energy
• /
• 제1권1호
• /
• pp.115-120
• /
• 2015

$K_2CO_3$-based dry regenerable sorbents were prepared by spray-drying techniques to improve mass produced $K_2CO_3-Al_2O_3$ sorbents (KEP-CO2P, hereafter), and then tested for their $CO_2$ sorption capacity by a $2,000Nm^3/h$ (0.5 MWe) $CO_2$ capture pilot plant built for Unit 3 of the Hadong thermal power station in 2010. Each of the sample sorbents contained 35 wt.% $K_2CO_3$ as the active materials with various support materials such as $TiO_2$, MgO, Zeolite 13X, $Al_2O_3$, $SiO_2$ and hydrotalcite (HTC). Their physical properties and reactivity were tested to evaluate their applicability to a fluidized-bed or fast transport-bed $CO_2$ capture process. The $CO_2$ sorption capacity and percentage utilization of $K_2CO_3$-MgO based sorbent, Sorb-KM2, was $8.6g-CO_2/100g$-sorbents and 90%, respectively, along with good mechanical strength for fluidized-bed application. Sorbs-KM2 and KT were almost completely regenerated at $140^{\circ}C$. No degradation of Sorb-KM by $SO_2$ added as a pollutant in flue gas was observed during a cycle test.

• 한국기후변화학회지
• /
• 제4권3호
• /
• pp.245-254
• /
• 2013

정부에서는 지구온난화에 따른 이산화탄소 저감 및 자원순환형(Zero Waste) 사회구축을 위해 가연성 폐기물을 대상으로 한 고형연료화 사업을 추진 중에 있다. 본 연구에서는 가연성 폐기물 고형연료(SRF) 사업에 대하여 추가 편익을 고려한 경제성 평가를 실시하였다. 경세성 분석은 수도권매립지에 반입되는 폐기물을 대상으로 한 SRF 시설을 가정하였으며, 비용은 건설비와 운영비를 고려하고, 편익으로는 열 및 전력 판매비, 환경 편익, 매립대체 편익을 고려하였다. 결론적으로 SRF 사업은 환경편익 등 기타 사업시행에 대한 편익을 고려하면 1.0으로 산출되었으며, 이 결과는 전력가격 및 물가변동에 따른 인건비 등에 큰 영향을 받는 것으로 분석되었다. 따라서 SRF 사업의 지속성을 위해서는 정부의 투자비 지원뿐만 아니라, 전력판매에 따른 적정한 정책지원 방향 설정 등이 필요 하다.

• 한국의류산업학회지
• /
• 제24권5호
• /
• pp.557-566
• /
• 2022

This study aims to investigate Jinju silk companies, production items, and silk industry supporting projects from 2019 to 2021 in order to discuss the current status of the silk industry. The following are this study's methods: First, a list of Jinju silk companies that have been operating for the past three years (2019-2021) was prepared to investigate the current status of the Jinju silk industry. Second, an investigation was conducted into the representative products produced in Jinju over the past three years; this investigation was conducted using direct interview. Third, an investigation was conducted on the projects that supported the Jinju silk industry over the past three years, and the list of members of the Gyeongnam Textile and Jinju Silk Industry Cooperative Association-a facility of Gyeongsangnam-do Province, the Jinju City Hall brochure (2019), and the SMINFO(SMall business status INFOrmation System) were utilized for this purpose. The following are the results: First, Jinju silk companies are classified into four categories, namely weaving, dyeing, twisting, and designing companies. According to data from 2021, 83% (34 of 41) of silk companies were weavers. Second, the demand for solid fabrics has increased over the past three years. The demand for patterned jacquard fabrics in producing Hanbok and Western-style clothing has decreased. Third, support for the Jinju silk industry could be classified into five categories: support for the operation of silk research institutions, support for the diversification of Jinju silk, support for the promotion of Jinju silk, support for the operation of silk manufacturers, and others.

• 한국학교보건학회지
• /
• 제17권2호
• /
• pp.127-150
• /
• 2004

Objectives: The purpose of this study is to provide a basic structure for the establishment of the direction of school health programs, an overview of the historical changes of school health programs and their results, and a conceptual framework on school health programs. Methods: The data analysis has been done using a statistical almanac, relevant laws and regulations, operation handbook of the program, theses, reports, records of public hearings, and other reports as a technical research primarily based on evidence. The methodology of this research classifies the development and growth transition of school health programs during a historical period through the investigation of regulations, organization, manpower, and its program via its development process and to provide a basic tool to design a solid school health policy. Results: A The growth and development of school health programs The development of school health programs was classified into three different periods including the forthcoming period (1945~1967), the completion period (1967~1993), and the actualization period based on the establishment of legislation for School Health Law, other relevant legislation, and the contents of school health programs (1993~present). B. Policy direction of school health programs School health programs have reestablished their goals and range based on basic direction, and developed the W1it model of information structure for school health program management and its basic structure. Finally, the stepwise support system through the building of the school health support center is recommended. (1) The basic direction of school health programs has proposed 7 basic goals to reestablish the policy direction of health improvement based on total health. (2) The W1it model of information system and the school health information system for school health program management has been developed to utilize positive management. (3) School health policy through the study of the health laws and systems has been developed. The necessity of school health support center for the policy support, functional support and operation support has also been proposed. Conclusions: It is necessary to build a school health support center that consists of health professionals in charge of policy support, functional support, and program support of school health programs in order to realize and develop new policy.

• 한국지리정보학회지
• /
• 제13권1호
• /
• pp.1-15
• /
• 2010

본 연구는 GIS 기반의 SWAT (Soil and Water Assessment Tools) 모형을 이용하여 탁수발생 잠재가능성 평가지표를 개발하고 수계별 탁수 관리방안 대책을 지원하기 위해 기후변화에 따른 안동호와 임하호 유역의 유출량과 부유사량의 변화특성을 분석하였다. 장래 기후변화자료는 IPCC (Intergovernmental Panel on Climate Change)에서 제공하는 A1B 기후변화시나리오의 MIROC3.2 hires 모델의 결과값을 이용하여 생성하였다. 과거의 기후자료(1977~2006)를 기반으로 20C3M (20th Century Climate Coupled Model) 모의값을 이용하여 강수와 온도를 보정한 뒤 CF (Change Factor) 기법으로 downscaling 하였다. 미래 기후변화 시나리오는 세 기간(2020s, 2050s, 2080s)으로 나누어 분석하였고, SWAT 모형과 연계하여 기후변화에 따른 유출량 및 부유사량의 변화를 산출하였다. 2020s, 2050s, 2080s 기간동안의 안동호와 임하호 유역의 유출량과 부유사량은 기준년도(2006)에 비해 증가하였고, 계절적인 분석에서도 봄, 가을, 겨울철 안동호와 임하호 유역의 유출량과 부유사량이 기준년도에 비해 증가하는 것으로 모의되었다. 단, 여름철 유량과 부유사량은 2020s에만 증가하고 2080s에는 감소하는 것으로 분석되었다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.716-721
• /
• 2004

Several Solid Freeform Fabrication Systems(SFFS) are commercialized in a few companies for rapid prototyping. However, they have many technical problems including the limitation of applicable materials. A new method of speedy prototyping is required for the recent manufacturing environments of multi-item and small quantity production. The objectives of this paper include the development of a novel method of SFFS, the ${CAFL}^{VM}$(Computer Aided Fabrication of Lamination for Various Material), and the manufacture of the various material samples for the certification of the proposed system and the creation of new application areas. For these objectives, the technologies for a highly accurate robot path control, the optimization of support structure, CAD modeling, adaptive slicing was implemented. In this paper, we design an algorithm that the cutting path of a laser beam which is controlled with constant speed. The laser beam is tangentially controlled in order to solve the inaccuracy of a 3D model surface. The designed algorithm for constant-speed path control and tangent-cutting control is implemented and experimented in the ${CAFL}^{VM}$ system.

• 마이크로전자및패키징학회지
• /
• 제6권1호
• /
• pp.23-29
• /
• 1999

전착법(EPD)에 의한 음극지지형 SOFC 단전지용 전해질 제조를 위하여 NiO-YSZ 다공성 기판 위에 극성이 서로 다른 전착용액을 사용하여 안정화 지르코니아 균일막 형성을 위한 전착조건과 막특성을 조사하였다. 알콜계 용액과는 달리 수계 용액에서 정전류, 0.138mA/$\textrm{cm}^2$이상에서 전극반응으로 생성한 기포에 의한 막결함이 생성하였으며 막무게 증가율이 감소하였다. 균일막 형성은 알콜계 용액에서 전극반응없이 안정한 전압특성을 보이는 정전류 0.035 mA/$\textrm{cm}^2$를 10초간 인가하였을 때 얻어졌다.

• Genomics & Informatics
• /
• 제15권4호
• /
• pp.136-141
• /
• 2017

Accurate detection of genomic alterations, especially druggable hotspot mutations in tumors, has become an essential part of precision medicine. With targeted sequencing, we can obtain deeper coverage of reads and handle data more easily with a relatively lower cost and less time than whole-exome or whole-genome sequencing. Recently, we designed a customized gene panel for targeted sequencing of major solid cancers. In this study, we aimed to validate its performance. The cancer panel targets 95 cancer-related genes. In terms of the limit of detection, more than 86% of target mutations with a mutant allele frequency (MAF) <1% can be identified, and any mutation with >3% MAF can be detected. When we applied this system for the analysis of Acrometrix Oncology Hotspot Control DNA, which contains more than 500 COSMIC mutations across 53 genes, 99% of the expected mutations were robustly detected. We also confirmed the high reproducibility of the detection of mutations in multiple independent analyses. When we explored copy number alterations (CNAs), the expected CNAs were successfully detected, and this result was confirmed by target-specific genomic quantitative polymerase chain reaction. Taken together, these results support the reliability and accuracy of our cancer panel in detecting mutations. This panel could be useful for key mutation profiling research in solid tumors and clinical translation.

• 한국수소및신에너지학회논문집
• /
• 제21권6호
• /
• pp.526-532
• /
• 2010

The anode may inevitably undergo a number of reduction.oxidation (redox) cycles during solid oxide fuel cells (SOFCs) operation. The re-oxidation of Ni to NiO causes significant mechanical stress to be developed across the anode, which may destroy the integrity of the whole cell. In this study, the redox behavior of Ni-YSZ composite was examined at $800^{\circ}C$ using various characterization techniques.

• Journal of Microbiology and Biotechnology
• /
• 제12권1호
• /
• pp.14-17
• /
• 2002

To increase the efficiency of a two-stage anaerobic wastewater digestion system, various polymers were added to the methanogenic reactor as supports. The addition of polyurethane addition (6%, w/v) to the methanogenic reactor facilitated the organic loading rate (2-day Hydraulic Retention Time), higher than that of the conventional methanogenic reactor (6-day HRT). During the operation of the polyurethane-added reactor, a significant decrease in the organic mass in the effluent (COD 5-6 kg/l) was achieved, compared to that of the conventional reactor (COD 15-20 kg/l). The methane gas production rate also improved about 3-fold in the polyurethane-added reactor. More biomass was found to accumulate in the polyurethane-liquid phase (volatile solid, 26-28kg) than in the free-liquid phase (volatile solid, 5- 7 kg/l) after 90 days of operation. A scaled-up experiment with a polyurethane-added 2.5-1 reactor confirmed the previous results, and no adverse effects such as plugging or channeling due to decreased efficiency was observed even after 4 months of operation.