• 정보학연구
• /
• 제5권2호
• /
• pp.69-80
• /
• 2002

일반적으로 초음파현미경시스템은 동작주파수로 단일 주파수를 사용해 왔다. 측정된 영상의 분해능과 질은 초음파현미경에서 사용된 초음파변환기에 의하여 결정된다. 본 논문에서는 SFR(Spatial Frequency Response)의 기저대역 조합을 통하여 반사형 초음파현미경의 수직분해능 개선에 대하여 연구하였다. 수직 분해능을 증가시키기 위해서는 하나 이상의 동작 주파수에서 얻어진 영상을 획득하고 이를 대수적으로 합성시켜 얻어진다. 실험결과 깊이 변화율이 개선된 영상들을 얻을 수 있었다.

• 한국대기환경학회지
• /
• 제33권4호
• /
• pp.351-360
• /
• 2017

In this study, we developed emission factors from solid-fuel fired combustors. In order to increase the reliability of emission factors, we conducted a joint research with the Institute of Health and Environment. As a result, PM average concentration was $8.19mg/m^3$. $SO_2$ and $NO_x$ were respectively 8.46 ppm, 50.64 ppm. Hazardous air pollutants such as Cr, Pb and Hg were detected in trace amounts continuously for 2 years in some solid-fuel fired combustors. The emission factors for the three kinds of PM, $SO_x$, $NO_x$ were developed based on the measurement data. For the PM emission factors, that of SRF was 15.93 g/kg and that of Bio-SRF was 14.18 g/kg. Compared with those of US. EPA, emission factors of this study showed the results of low values. $SO_x$ emission factors were 4.42 g/kg for SRF and 1.39 g/kg for Bio-SRF. $NO_x$ emission factors were 13.21 g/kg and 4.43 g/kg, respectively. Through the results of this study, we would support atmospheric administration policies such as the emission factor notification revision.

• Geomechanics and Engineering
• /
• 제13권1호
• /
• pp.173-194
• /
• 2017

Access shaft is of critical importance to the construction and operation of underground rock caverns. It usually has a relatively large cross-section and penetrates through fill materials, soil layers, and weathered rocks before reaching the caverns excavated in solid bedrock. In this paper, the design and construction of vertical shafts are reviewed in terms of diameter, depth, geological conditions, and support structure. Three shaft alternatives, namely alternative I: vertical shaft with spiral roads, alternative II: upper shaft with spiral roads & lower tunnels, alternative III: plain shaft, are proposed based on a simplified geological profile of the Jurong formation, Singapore. The advantages and limitations of the three types of shafts are discussed. The key issues relating to shaft design and construction, such as the shaft sinking, water control, support structure, are also discussed with a series of solutions provided, such as the sequential excavation, pre-grouting and diaphragm walls.

• Journal of Welding and Joining
• /
• 제35권1호
• /
• pp.79-88
• /
• 2017

The effect of residual metallic sodium on the solidification cracking susceptibility of type 316FR stainless steel was investigated via transverse-Varestraint tests. And a solidification brittle temperature range (BTR) of type 316FR stainless steel was 37 K. However, the BTR expanded from 37 to 67 K, as the amount of metallic sodium at the specimen surface increased from 0 to $7.99mg/cm^2$. Microstructural observation of the weld metal suggested that metallic sodium existed in the weld metal, including in the cell boundaries, during welding solidification. Thermodynamic calculations suggested that sodium expanded the temperature range of solidliquid coexistence during welding solidification of the steel weld metal. Therefore, the increased solidification cracking susceptibility (i.e., expansion of the BTR) in the residual sodium environment was attributed to enhanced segregation of sodium during the welding solidification; this segregation, in turn, resulted in an expanded temperature range of solid-liquid coexistence.

• Computers and Concrete
• /
• 제20권5호
• /
• pp.555-562
• /
• 2017

The accuracy and integrity of stress data acquired by bridge heath monitoring system is of significant importance for bridge safety assessment. However, the missing and abnormal data are inevitably existed in a realistic monitoring system. This paper presents a data reconstruction approach for bridge heath monitoring based on the wavelet multi-resolution analysis and support vector machine (SVM). The proposed method has been applied for data imputation based on the recorded data by the structural health monitoring (SHM) system instrumented on a prestressed concrete cable-stayed bridge. The effectiveness and accuracy of the proposed wavelet-based SVM prediction method is examined by comparing with the traditional autoregression moving average (ARMA) method and SVM prediction method without wavelet multi-resolution analysis in accordance with the prediction errors. The data reconstruction analysis based on 5-day and 1-day continuous stress history data with obvious preternatural signals is performed to examine the effect of sample size on the accuracy of data reconstruction. The results indicate that the proposed data reconstruction approach based on wavelet multi-resolution analysis and SVM is an effective tool for missing data imputation or preternatural signal replacement, which can serve as a solid foundation for the purpose of accurately evaluating the safety of bridge structures.

• 한국항만경제학회지
• /
• 제17권1호
• /
• pp.73-90
• /
• 2001

Logistics has become a key element in a shipping firm's overall strategy, now that the concept of logistics has expanded into one that is more comprehensive and integrated. furthermore, the global shipping market is the most competitive market in the world. In this environment, shipping firms are using Logistics Information Systems (LIS), which help them to save time and reduce costs. As such, LIS has become a critical part of Korea's attempts to develop Its national logistics system and industry. In this light, this study attempted to empirically determine the critical elements necessary for effective shipping LIS implementation and to then analyze how these elements are related to actual logistics performance within the shipping industry. The research results show that the sample firms considered the following factors to be most Important to an effective LIS: the support of top management; an efficient and well-structured communication channel; a solid strategic implementation plan; and a high level of information analysis internally. Other factors mentioned as being somewhat significant included MIS organization and human resources, MIS discipline and training, software development capabilities, MIS organizational alignment, database management systems information standardization, competitive advantage, financial support and government support The main problems with current shipping LIS include the expensive cost of systems, lack of standardized working processes, and weak organizational structures.

• 멤브레인
• /
• 제25권2호
• /
• pp.171-179
• /
• 2015

과불소계 술폰화 이오노머(perfluorinated sulfonic acid ionomers; PFSAs)는 뛰어난 수소이온전도성과 높은 내화학성으로 인해 고분자 전해질 연료전지(polymer electrolyte fuel cells)용 고체전해질로 널리 사용되고 있다. 그러나 PFSA 전해질은 가습-건조조건에서 연료전지가 구동에 따라 반복적인 팽윤-수축으로 인해 전극층이 전해질로부터 탈리되어 전기화학적 수명특성이 감소되는 문제점을 가지고 있다. 본 연구에서는 다공성 PTFE support film의 기공특성에 대한 이해를 바탕으로 기공구조 내 나피온 이오노머를 함침시키는 강화막을 제조하였고, 기본특성을 평가하였다. 제조된 강화막은 매우 높은 수소이온전도도(${\sim}~0.5S\;cm^{-1}@90^{\circ}C$ in liquid water)를 나타내었다.

• Journal of Applied Biological Chemistry
• /
• 제57권4호
• /
• pp.313-320
• /
• 2014

Black liquor (BL) is a by-product of rice straw pulping process. It is a low costs raw material for production value-adding proteins and enzymes, which has been paid more and more attention to reduce its environmental pollution. Mixed cultures of micelial fungi, Trichoderma reesei Northern Regional Research Laboratory (NRRL)11236, Trichoderma reesei NRRL 6165 and Aspergillus niger strains NRC 5A, NRC 7A, and NRC 9A were evaluated for their ability to produce xylanase using crude hemicellulose (CHC) prepared from BL and peat moss as an inert support under solid state fermentation (SSF). The most potent strains, A. niger NRC 9A (818.26 U/g CHC) and T. reesei NRRL 6165 ($100.9{\pm}57.14$ U/g CHC), were used in a mixed culture to enhance xylanase production by co-culturing under SSF. In the mixed culture, xylanase production ($1070.52{\pm}12.57$ U/g CHC) was nearly1.3 and 10.6-fold increases over the activities attained in their monocultures, A. niger NRC 9A and T. reesei NRRL 6165, respectively. Optimization of the culture parameters of the mixed culture SSF process, concentration of ammonium sulfate and corn steep liquor, CHC/peat moss ratio, inoculum size and ratios of the two strains, initial pH value, initial moisture content and incubation time, exhibited a significant increase ($2414.98{\pm}84.02$ U/g CHC) in xylanase production than before optimization.

• Journal of Electrochemical Science and Technology
• /
• 제11권3호
• /
• pp.273-281
• /
• 2020

Constructing and making highly active and stable nanostructured Pt-based catalysts with ultralow Pt loading are still electrifying for electrochemical applications such as water electrolysis and fuel cells. In this study, MoO₃ ribbons (RBs) of few micrometer in length is successfully synthesized via hydrothermal synthesis. Subsequently, 3-dimentional (3D)-silicate layer for about 10 to 15 nm is introduced via chemical deposition onto the pre-formed MoO₃ RBs; to setup the platform for Pt metaldots (MDs) deposition. In comparison with the bare MoO₃ RBs, the MoO₃-Si has served as a efficient solid-support for stabilizing and accommodating the uniform deposition of sub-2 nm Pt MDs. Such a structural design would effectively assist in improving the electronic conductivity of a fabricated MoO₃-Si-Pt catalyst towards MOR; the interfaced, porous and 3D silicate layer has assisted in an efficient mass transport and quenching the poisonous CO_ads species leading to a significant electrocatalytic performance for MOR in alkaline medium. Uniformly decorated, sub-2 nm sized Pt MDs has synergistically oxidized the MeOH in association with the MoO₃-Si solid-support hence, synergistic catalytic activity has been achieved. Present facile approach can be extended for fabricating variety of highly efficient Metal Oxide-Metal Nanocomposite for energy harvesting applications.

• 대한화학회지
• /
• 제33권1호
• /
• pp.46-54
• /
• 1989

식품 및 비타민 제제중에 존재하는 지용성 비타민의 추출 및 동시 정량법을 검토하였다. 역상 액체크로마토그래피에 의한 지용성 비타민의 동시 분리 및 정량은 메탄올 : 물 = 95 : 5 이동상으로 Novapak $C_{18}$ 컬럼하에서 이루어졌다. 비타민의 검출에는 UV검출기를 사용하였으며 검출감도를 증가시키기 위하여 분석중 UV 검출파장을 각각의 비타민 용리시간에 따라 최대흡수 파장인 330, 265, 285 및 290nm로 변경하였다. 지용성 비타민의 분리 및 분석은 40분안에 완료되었다. 시료의 전처리에는 알카리 가수분해법과 효소가수분해법을 이용하였으며, 비타민의 추출은 액체-액체추출법과 액체-고체추출법을 이용하였다. 비타민 A,D, E 분석에는 알카리 가수분해법 및 효소가수분해법이 비타민 K 분석에는 효소가수분해법만이 좋은 결과를 나타냈으며, 비타민 추출에는 액체-액체 추출시 diethyl ether, pentane 및 n-hexane이, 액체-고체 추출시 silica 카트리지가 좋은 추출효과를 나타냈다.