• 복합신소재구조학회 논문집
• /
• 제1권2호
• /
• pp.1-13
• /
• 2010

복합적층구조의 층간분리현상은 탄성좌굴하중을 감소시키며 설계값보다 낮은 수준에서 전체구조물의 파괴를 유발한다. 따라서 복합적층구조의 층간분리 현상은 매우 중요한 문제이며 많은 이론과 실험적인 연구가 진행되어왔다. 본 연구에서는 3차원 이론을 사용한 효과적인 유한요소법에 기초하여 임베디드된 사각형 층간분리 현상을 갖는 복합적층판의 탄성좌굴 거동을 분석하였다. 해석을 위해 개발된 3차원 유한요소는 EAS-SOLID8이라고 이름 붙여졌으며 강화된 대체 변형률 방법을 사용하였다. 임베디드된 사각형 층간분리를 갖는 복합적층판의 탄성좌굴거동 분석을 위해 경계조건, 폭-두께비 변화에 대하여 매개변수 해석을 수행하였다. 본 연구의 그래프와 좌굴모드는 임베디드된 사각형 층간분리를 갖는 복합적층판의 설계에 매우 유용한 자료가 될 것으로 사료된다.

• 한국추진공학회지
• /
• 제18권5호
• /
• pp.12-18
• /
• 2014

공기흡입형 추진기관의 가스발생기에 사용하기 위한 연료과농(Fuel-rich) 고체 추진제의 특성에 대한 연구를 수행하였다. 일반적인 고체 추진제는 평균 60%이상의 산화제를 포함하는 데, 연료과농 고체 추진제를 개발히기 위해 산화제 함량을 30%내외로 낮추고 매우 높은 부피당 열량을 가지는 비정질 붕소를 입자화(Bead)하여 금속연료 함량을 증가시켜 고체 추진제의 제조 공정성 및 연소속도 특성을 확인하였다. 과립화붕소의 입도가 작을수록 추진제 제조 공정에서 초기 점도가 높아지고, 입도가 클수록 연소속도 및 압력지수가 증가하는 것을 확인할 수 있었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2222-2227
• /
• 2007

Newly structured metal-supported solid oxide fuel cell was fabricated and characterized by impedance analysis and galvanodynamic experiment. Using a cermet adhesive, thin ceramic layer composed of anode(Ni/YSZ) and electrolyte(YSZ) was joined with STS430 metal support of which flow channel was fabricated. $La_{0.8}Sr_{0.2}Co_{0.4}Mn_{0.6}O_3$ perovskite oxide was used as cathode material. Single cell performance was increased and saturated at operating time to 300hours at 800$^{\circ}C$ because of cathode sintering effect. The sintering effect was reinvestigated by half cell test and exchange current density was measured as 0.005A/$cm^2$. Maximum power density of the cell was 0.09W/$cm^2$ at 800$^{\circ}C$. Numerical analysis was carried out to classify main factors influencing the single cell performances. Compared to experimental IV curve, simulated curve based on experimental parameters such as exchange current density was in good agreement.

• 산업기술연구
• /
• 제21권B호
• /
• pp.281-286
• /
• 2001

In this study, product design and prototype manufacturing of a plastic water-pump pulley has been tried. The designed model is supposed to be made of 33 % glass reinforced resin of which the tensile strength is 180 MPa, and has 24 ribs on each side to increase its structural strength. Structural analysis under a static load of 300 kgf acting on both edges of the belt has been carried out using a commercial finite element code, MARC. The analysis result showed the maximum effective stress near a rib of designed model would be at most 35 MPa (less than 20% of the tensile strength), therefore, the plastic product would be sufficiently safe under that loading condition. On the basis of the structural analysis, a prototype of the designed model has been manufactured by using the fused deposition modelling (FDM) method which is one of the rapid prototyping (RP) methods, using ABS resin and support materials. The CAD data exported to the RP system in STL format was prepared by a commercial solid modeling software, SolidWorks. It has been proved that the plastic pulley can successfully replace the existing flow-formed steel product.

• 한국수학교육학회지시리즈A:수학교육
• /
• 제52권4호
• /
• pp.531-547
• /
• 2013

The purpose of the study is to examine how effects of activities using Google SketchUp on students' spatial ability and 3D geometric thinking in measuring the volume of solid figures. By comparing the results from pre- and post-tests between the experimental group and control group, we found that activities using Google SketchUp help students improve their spatial ability in the spatial orientation and visualization. In addition, more than half students in the experimental group moved from level 4 up to level 7 in thinking process of measuring the volume in terms of Battista(2004)'s levels. This study suggests that the instruction with Google SketchUp can help to improve students' spatial ability and 3D geometric thinking in the regular class in middle school. In addition, SketchUp can be an advanced technological tool to support students' self-directed learning, which create an efficient educational environment and a great opportunity to learn geometry in an effective manner.

• 한국자기공명학회논문지
• /
• 제10권1호
• /
• pp.74-88
• /
• 2006

Since the first commercial NMR spectrometer came out in 1953 from Varian, much of the hardware development has been improved and matured through commercial equipments. Many of magnetic resonance laboratories however still build and use home-built spectrometers, which are satisfactory even with the consideration of educational purpose only. The home-built NMR spectrometer could be further advantageous and could be often an only option for investigating new ideas with demanding experimental conditions or new hardware support. A solid state NMR spectrometer was designed with extra interest in stochastic experiment and built for an 8.93 T superconducting magnet from Oxford instrument. Super-heterodyned system was implemented for the transmitter and receiver parts. Intermediate frequency (IF) for the heterodyne system was chosen to 70 MHz for the first and the second channels, with additional 120 MHz for the third channel for maximum NMR frequency capability. We will show overall schematics, and discuss the designs with detailed diagrams, then demonstrate the applicability of home-built spectrometer with stochastic-excitation in solid state NMR and in applications to quadrupolar nuclear Spins.

• Bulletin of the Korean Chemical Society
• /
• 제34권4호
• /
• pp.1160-1164
• /
• 2013

The solid super acid catalyst $SO{_4}^{2-}$/$ZrO_2$ was prepared by impregnation method using $ZrO_2$ as the catalyst support. Catalyst forming was taken into consideration in order to separate catalyst from the mixture of cellulose acetate propionate (CAP). $Al_2O_3$ and sesbania gum powder were selected as binding agent and auxiliary agent respectively. The catalytic properties were evaluated through esterification of cellulose with acetic anhydride, propionic anhydride and characterized by XRD, FTIR and $NH_3$-TPD. In this paper, the effects of concentration of $H_2SO_4$ impregnated, calcination temperature, esterification temperature and esterification time on the yield, acyl content and viscosity of CAP were investigated. The results showed that $SO{_4}^{2-}/ZrO_2$ successfully catalyzed CAP synthesis over catalysts impregnated in 0.75 mol/L $H_2SO_4$ and calcined at $500^{\circ}C$. The yield, acetyl content and propionyl content of CAP reached the maximum value of 105.3%, 29.9% and 25.8% reacted at $50^{\circ}C$ for 8 h.

• 한국산학기술학회논문지
• /
• 제10권3호
• /
• pp.500-506
• /
• 2009

본 논문은 주요 부위에 대한 정적음력 시뮬레이션을 통해 PFA 라이닝 플러그밸브 본체의 설계자를 지원하는 것을 주된 목표로 한다. CAD 작업을 통해 생성된 형상 모델을 스텝(step)파일로 변환하여 해석작업에 사용한다. 전문적인 해석경험이 없는 밸브 생산업체의 설계자가 형상 모델에 대한 인장, 굽힘, 비틀림 모멘트 등을 계산하는 과정을 이해함으로써 구조적 취약점을 사전에 파악하고, 제품에 반영하여 제품 신뢰도 및 설계효율 증대에 기여할 수 있는 기본적인 방안을 제시하고자 하였다.

• 한국기계가공학회지
• /
• 제18권2호
• /
• pp.44-51
• /
• 2019

With the goal of tissue regeneration for organs damaged through an accident or a disease, research on tissue engineering has been conducted to produce 3-D scaffolds that can support the cells in the attachment and growth for the cell proliferation and differentiation. A scaffold requires a suitable pore size and porosity to increase the nutrient circulation or oxygen supply for the attachment and growth of cells. The existing production methods such as solvent-casting particulate leaching, phase separation, and fiber bonding have certain disadvantages. With these methods, it is difficult to obtain a free desired shape. In addition, certain pore sizes and interconnectivities among the pores may not be guaranteed. To solve these problems, this study has fabricated a scaffold with a 3-D shaped nose using Alginate, which is a natural polymer obtained through Fused Deposition Modeling (FDM), one of the CAD/CAM-based Solid Freeform Fabrication (SFF) methods.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 추계학술대회 논문집
• /
• pp.187-190
• /
• 2009

$LaCrO_3$ series are the most common candidate materials for a ceramic interconnect for SOFC and the thermal expansion coefficient of these matches very well with that of YSZ electrolyte. In this study, characteristics of the coated films on the anode-support, which were formed by using $La_{0.8}Ca_{0.2}CrO_3$, $La_{0.8}Sr_{0.2}CrO_3$, $La_{0.8}Ca_{0.2}Co_{0.1}Cr_{0.9}O_3$ for ceramic interconnet for SOFC, were investigated. All powders showed single perovskite phase and the precursors had spherical shapes of $2{\mu}m{\sim}30{\mu}m$. According to SEM analysis, coated film of LCC on pretreated anode-support was more thicker, whereas the coated film on untreated anode-support was densely formed. As the results of electrical conductivity of anode-support coated with the ceramic interconnects, LCCC exhibited the most excellent electrical conductivity of 0.15S/cm at $750^{\circ}C$.