• 한국수소및신에너지학회논문집
• /
• 제21권6호
• /
• pp.533-539
• /
• 2010

Ni-YSZ supported button cells were prepared by spray-coating YSZ and screen-printing YSZ-LSM powder as an electrolyte and oxygen electrode on Ni-YSZ cermet disks. In order to identify the polarization loss mechanism in high temperature electrolysis current-voltage characteristics coupled with electrochemical impedance spectroscopy were investigated as a function of temperature, current load, and the humidity. The effects of the different current collectors of platinum and silver for oxygen electrodes were compared. With Ag current collector two polarization losses were distinguished. The high frequency component was attributed to the Ni-YSZ cermet which was less susceptible to temperature variation but increasing in loss with humidity. The lower frequency component was attributed to the LSM electrode. Platinum current collector led to a much lower polarization loss.

• 한국수소및신에너지학회논문집
• /
• 제28권5호
• /
• pp.521-530
• /
• 2017

Improving the microstructure of NiO/YSZ is one of several approaches used to enhance the electrical and mechanical properties of an anode support in Solid Oxide Fuel Cells (SOFCs). The aim of the work reported in this paper was to predict the relationship between these microstructural changes and the resulting properties. To this end, modification of the anode microstructure was carried out using different sizes of Poly (Methyl Methacrylate) (PMMA) beads as a pore former. The electrical conductivity and mechanical strength of these samples were measured using four-probe DC, and three-point bend-test methods, respectively. Thermal etching followed by high resolution SEM imaging was performed for sintered samples to distinguish between the three phases (NiO, YSZ, and pores). Recently developed image analysis techniques were modified and used to calculate the porosity and the contiguity of different phases of the anode support. Image analysis results were verified by comparison with the porosity values determined from mercury porosimetry measurements. Contiguity of the three phases was then compared with data from electrical and mechanical measurements. A linear relationship was obtained between the contiguity data determined from image analysis, and the electrical and mechanical properties found experimentally. Based upon these relationships we can predict the electrical and mechanical properties of SOFC support from the SEM images.

• 한국세라믹학회지
• /
• 제53권5호
• /
• pp.494-499
• /
• 2016

In this work, the effects of different sintering inhibitors added to $La_{0.8}Sr_{0.2}MnO_{3-{\partial}}$ (LSM) were studied to obtain an optimum cathode material for cathode-supported type of Solid oxide fuel cell (SOFC) in terms of phase stability, mechanical strength, electric conductivity and porosity. Four different sintering inhibitors of $Al_2O_3$, $CeO_2$, NiO and gadolinium doped ceria (GDC) were mixed with LSM powder, sintered at $1300^{\circ}C$ and then they were evaluated. The phase stability, sintering behavior, electrical conductivity, mechanical strength and microstructure were evaluated in order to assess the performance of the mixture powder as cathode support material. It has been found that the addition of $Al_2O_3$ undesirably decreased the electrical conductivity of LSM; other sintering inhibitors, however, showed sufficient levels of electrical conductivity. GDC and NiO addition showed a promising increase in mechanical strength of the LSM material, which is one of the basic requirements in cathode-supported designs of fuel cells. However, NiO showed a high reactivity with LSM during high temperature ($1300^{\circ}C$) sintering. So, this study concluded that GDC is a potential candidate for use as a sintering inhibitor for high temperature sintering of cathode materials.

• 한국항해항만학회지
• /
• 제47권2호
• /
• pp.106-119
• /
• 2023

Due to global decarbonization movement and tightening of maritime emissions restrictions, the shipping industry is going to switch to alternative fuels. Among candidates of alternative fuel, methanol is promising for decreasing SOx and CO2 emissions, resulting in minimum climate change and meeting the goal of green shipping. In this study, a novel combined system of direct methanol solid oxide fuel cells (SOFC), proton exchange membrane fuel cells (PEMFC), gas turbine (GT), and organic Rankine cycle (ORC) targeted for marine vessels was proposed. The SOFC is the main power generator of the system, whereas the GT and PEMFC could recover waste heat from the SOFC to generate useful power and increase waste heat utilizing efficiency of the system. Thermodynamics model of the combined system and each component were established and analyzed. Energy and exergy efficiencies of subsystems and the entire system were estimated with participation of the first and second laws of thermodynamics. The energy and exergy efficiencies of the overall multigeneration system were estimated to be 76.2% and 30.3%, respectively. The combination of GT and PEMFC increased the energy efficiency by 18.91% compared to the SOFC stand-alone system. By changing the methanol distribution ratio from 0.05 to 0.4, energy and exergy efficiencies decreased by 15.49% and 5.41%, respectively. During the starting up and maneuvering period of vessels, a quick response from the power supply system and propulsion plant is necessary. Utilization of PEMFC coupled with SOFC has remarkable meaning and benefits.

• 한국식품과학회지
• /
• 제41권1호
• /
• pp.87-92
• /
• 2009

본 연구에서는 금불초(Inula britannica) 추출물의 항산화 효과와 ${H_2}{O_2}$로부터 유도된 SH-SY5Y 신경모세포종의 세포독성에 대한 보호능을 측정하였다. 금불초 지상부위의 70% 메탄올 추출물에 대하여 용매별로 분획을 실시하였고 핵산(Fr.H), 에틸아세테이트(Fr.EA) 및 물(Fr.W) 분획에 대하여 활성을 조사하였다. 분획 중 Fr.W의 폴리페놀/플라보노이드 함량이 가장 높았으며 Fr.W의 총 폴리페놀 함량은 $318.1{\pm}20.6{\mu}g$/mg solid로, Fr.EA 및 Fr.H와 비교하여 각각 약 2.5배, 23.1배 수준이었다. DPPH radical, ABTS radical 및 nitric oxide 소거능 등의 항산화 활성에서도 Fr.W가 가장 높은 활성을 나타내었고 Fr.H는 거의 활성을 나타내지 않았다. Fr.W는 ${H_2}{O_2}$에 의해 유도된 세포사멸에 대하여 62.5 ${\mu}g$/mL 농도에서 현저하게 세포독성을 감소시켰으며 250 ${\mu}g$/mL에서는 77.0%의 세포사멸 억제능을 보였다. Fr.EA는 보호 효과를 나타 내지 않았으며 Fr.H는 오히려 ${H_2}{O_2}$로 인한 세포 독성을 증가시키는 것으로 나타났다. 세포 내 ROS에 대한 영향으로 Fr.W 250 ${\mu}g$/mL 처리시 39.2% 세포내 ROS를 감소시켰으며 Fr.EA는 25 ${\mu}g$/mL에서 26.8%의 세포내 ROS를 소거하였다. 이러한 금불초 Fr.W의 항산화 활성은 ROS에 의해 야기되는 뇌세포 독성에 대한 보호 작용에 공헌할 수 있을 것으로 예상된다.

• 전기화학회지
• /
• 제8권4호
• /
• pp.162-167
• /
• 2005

본 연구는 Pechini법을 이용하여 Ca과 Sr이 도핑된 $LaCrO_3$계의 $La_{0.6}Ca_{0.41}CrO_3$ (LCC41), $La_{0.8}Sr_{0.05}Ca_{0.15}CrO_3$, (LSCC), $La_{0.75}Ca_{0.27}CrO_3$ (LCC27) 분말들을 제조하여, 분말의 소결 특성 및 코팅층의 특성을 조사하였다. 제조된 LCC41, LSCC, LCC27 분말은 각각 0.6, 0.9, $1.5{\mu}m$의 평균 입자크기를 가졌으며, LCC41의 경우 $1400^{\circ}C$에서 98% 이상의 소결 밀도를 나타내었다. 연료극 지지체상의 LSCC 코팅은 LCC41층에 있는 Ca의 이동을 어느 정도 억제하는 역할을 하는 것으로 나타났다. 대기 용사 코팅된 LCC27은 치밀한 코팅막을 형성하였으며, 이 코팅층 위에 LCC41을 습식 코팅할 경우 더욱 치밀하고 높은 전기전도도를 갖는 코팅막을 얻을 수 있었다. 용사코팅된 LCC27, 습식 코팅된 LCC41는 높은 전기전도도를 나타내었으나, LSCC의 경우 낮은 소결성으로 인해 전기전도도가 작게 나타났다.

• 한국재료학회지
• /
• 제18권12호
• /
• pp.660-663
• /
• 2008

Ni-GDC (gadolinia-doped ceria) composite powders, the anode material for the application of solid oxide fuel cells, were prepared by a solution reduction method using hydrazine. The distribution of Ni particles in the composite powders was homogeneous. The Ni-GDC powders were sintered at $1400^{\circ}C$ for 2 h and then reduced at $800^{\circ}C$ for 24 h in 3% $H_2$. The percolation limit of Ni of the sintered composite was 20 vol%, which was significantly lower than these values in the literature (30-35 vol%). The marked decrease of percolation limit is attributed to the small size of the Ni particles and the high degree of dispersion. The hydrazine method suggests a facile chemical route to prepare well-dispersed Ni-GDC composite powders.

• 한국수소및신에너지학회논문집
• /
• 제25권3호
• /
• pp.280-288
• /
• 2014

SDC (Samarium doped Ceria) electrolyte was developed for Intermediate temperature SOFC ($500^{\circ}C-800^{\circ}C$) which showed a good electrical conductivity. In this study, we used sintering aids to reduce the SDC sintering temperature down to $1000^{\circ}C$, especially which can help the SOFC scale-up. In order to reduce the SDC sintering temperature, $Li_2CO_3$ and $TiO_2$ were used as a sinering aids for decreasing sintering temperature. $Li_2CO_3$ and $TiO_2$ doped SDC sintered at $1000^{\circ}C$ showed 99% of the theoretical density and higher electrical conductivity than the pure SDC sintered at $1500^{\circ}C$. When measuring the OCV (Open circuit voltage) with the $Li_2CO_3$ and $TiO_2$ doped SDC electrolyte, however, the OCV values were lower than the theoretical OCV values which means that the modified SDC still had electronic conductivity.

• Journal of Electrical Engineering and Technology
• /
• 제10권6호
• /
• pp.2256-2261
• /
• 2015

In the power plant using high temperature fuel cells such as Molten Carbonate Fuel Cell(MCFC), and Solid Oxide Fuel Cell(SOFC), the generated electric power per area of power generation facilities is much higher than any other renewable energy sources. - High temperature fuel cell systems are capable of operating at MW rated power output. - It also has a feature that is short for length of the line for connecting the interior of the generation facilities. In normal condition, these points are advantages for voltage drops or power losses. However, in abnormal condition such as fault occurrence in electrical system, the fault currents are increased, because of the small impedance of the short length of power cable. Commonly, to minimize the thermal-mechanical stresses on the stack and increase the systems reliability, we divided the power plant configuration to several banks for parallel operation. However, when a fault occurs in the parallel operation system of power main transformer, the fault currents might exceed the interruption capacity of protective devices. In fact, although the internal voltage level of the fuel cell power plant is the voltage level of distribution systems, we should install the circuit breakers for transmission systems due to fault current. To resolve these problems, the SFCL has been studied as one of the noticeable devices. Therefore, we analyzed the effect of application of the SFCL on bus tie in a fuel cell power plants system using PSCAD/EMTDC.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 추계학술대회 논문집
• /
• pp.17-18
• /
• 2007

Solid oxide fuel cells are clean, pollution-free technology for the electrochemical generation of electricity at high efficiency. Specially, the polarization resistance between electrolyte and electrode of SOFC unit cell is of importance, because it is desirable to develop SOFC operating at intermediate temperature below $800^{\circ}C$. The LSCF cathode prepared using modified oxalate method was investigated with different electrolyte. A precursor was prepared with oxalic acid, ethanol and $NH_4OH$ solution. The LSCF precursor was prepared at $80^{\circ}C$, and pH control was 2, 6, 8, 9 and 10. The precursor powder was calcined at $800^{\circ}C$, $1000^{\circ}C$ and $1200^{\circ}C$ for 4hrs. The crystal of LSCF powders show single phase at pH 2, 6, 8 and 9, and the average particle size was about $3{\mu}m$. The LSCF cathode with heat treatment at $1200^{\circ}C$ showed a plot of electric conductivity versus temperature. Unit cell prepared from the LSCF cathode, buffer layer between cathode and electrolyte and the LSGM, YSZ, ScSZ and CeSZ electrolyte. Also interface reaction between LSCF, buffer layer and electrolyte were measured by EPMA and the polarization resistance for unit cell with cycle measure using a Solatron 1260 analyzer.