• 반도체디스플레이기술학회지
• /
• 제5권4호
• /
• pp.35-40
• /
• 2006

This paper shows that the effect of exposing on the top area and a solution which using a water circulation system. Semiconductor substrate stage is made from Aluminum and is repeated the sequence of exposing (150), turning OFF shutter, taking 30 sec. interval at the top area of stage. So the temperature of substrate temperature rises continuously. On this, we made a waterway at the inner part of the substrate stage and operated a water circulation system. We measured the temperature of a substrate stage surface with a thermocouple attached to the substrate stage. To analyze the top area's temperature, we used Analysis Program ANSYS for analysis and 3D CAD program Solid-Works for modeling.

• Korean Chemical Engineering Research
• /
• 제52권3호
• /
• pp.371-377
• /
• 2014

Characteristics of holdup and flow behavior of fluidized solid particles were investigated in a liquid-solid circulating fluidized bed ($0.102m{\times}3.5m$). Effects of liquid velocity ($U_L$), particle size ($d_P$) and solid circulation rate ($G_S$) on the solid holdup, overall particle rising velocity, slip velocity between liquid and particles and hydrodynamic energy dissipation rate in the riser were examined. The particle holdup increased with increasing $d_P$ or $G_S$ but decreased with increasing $U_L$. The overall particle rising velocity increased with increasing $U_L$ or $G_S$ but decreased with increasing $d_P$. The slip velocity increased with increasing $U_L$ or $d_P$ but did not change considerably with $G_S$. The energy dissipation rate, which was found to be closely related to the contacting frequency of micro eddies, increased with increasing $d_P$, $G_S$ or $U_L$. The solid particle holdup was well correlated with operating variables such as $U_L$, $d_P$ and $G_S$.

• 청정기술
• /
• 제19권4호
• /
• pp.437-445
• /
• 2013

건식 이산화탄소 흡수제를 사용하는 연소 전 이산화탄소 포집용 회수증진수성가스화(sorption enhanced water gas shift, SEWGS) 시스템을 개발하기 위해 이산화탄소 흡수제의 수력학 특성을 측정 및 해석하였다. 기포유동층 조건에서 시스템을 조업하기 위해 이산화탄소 흡수제의 최소유동화속도를 측정하였으며 조업변수의 영향을 해석하였다. 최소유동화속도는 압력과 온도가 증가함에 따라 감소하였으며 층직경이 증가함에 따라 감소하는 경향을 나타내었다. 연속적인 이산화탄소 흡수-재생 조업조건을 결정하기 위해 고체순환속도에 미치는 조업변수의 영향을 측정 및 해석하였다. 고체순환속도는 10~65 kg/h 범위에서 변화시킬 수 있었으며 고체분사노즐의 유속, 재생반응기의 유속 및 고체층 높이가 증가함에 따라 증가하는 경향을 나타내었다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 춘계학술대회 논문집
• /
• pp.405-408
• /
• 2007

Semi-solid Al-Zn-Mg alloys were produced using a cooling plate method in order to investigate the extrudability. Al melt was poured on cooling plate which was adjusted at $60^{\circ}$ with respect to the horizontal plane, and the melt was cooled by water circulation underneath. Obtained Semi-solid feedstock has globular microstructure but also contains considerable amount of gas pore. Due to the pore, tensile elongation of the semi-solid feedstock was very low and it doesn't show yield point phenomenon. Isothermal hot extrusion was carried out using at $400^{\circ}C$ with a ram speed of 1mm/sec and an extrusion ratio of 25:1. The extruded bar show noticeably improved tensile ductility and strength because pore volume fraction decreased from 5% to 0.8% after extrusion. Mechanical properties of the semi-solid extruded bar were compared with that of commercial casting alloy..

• 소성∙가공
• /
• 제16권5호통권95호
• /
• pp.391-395
• /
• 2007

Semi-solid Al-Zn-Mg alloys were produced by using a cooling plate method in order to investigate the extrudability. Al melt was poured on cooling plate which was adjusted at $60^{\circ}$ with respect to the horizontal plane, and the melt was cooled by water circulation underneath. Obtained Semi-solid feedstock has globular microstructure but also contains considerable amount of gas pore. Due to the pore, tensile elongation of the semi-solid feedstock was very low and it doesn't show yield point phenomenon. Isothermal hot extrusion was carried out using at $400^{\circ}C$ with a ram speed of 1mm/sec and an extrusion ratio of 25:1. The extruded bar show noticeably improved tensile ductility and strength because pore volume fraction decreased from 5% to 0.8% after extrusion. Mechanical properties of the semi-solid extruded bar were compared with that of commercial casting alloy.

• Korean Chemical Engineering Research
• /
• 제51권3호
• /
• pp.335-341
• /
• 2013

목질계 바이오매스인 옥수수대 전처리를 위하여 고안된 순환식 암모니아 전처리 반응기(Ammonia Circulation Reactor (ACR))를 이용하여 연구하였다. 이 전처리 방법은 적은 양의 액체를 사용하도록 고안되었으며 이 연구에선 기존의 전처리 공정보다 낮은 전처리 온도($60{\sim}80^{\circ}C$), 반응시간(4~12 hour) 그리고 고체:액체 비율(1:3~1:8) 등의 공정 조건을 실험 하여 효과를 비교하였다. 즉 여러 공정 조건에서 전처리 후 고형물의 잔류 고체량, 당, Lignin 함량, 그리고 효소당 화율 등을 측정하였다. 여러 실험 조건에서 공통적으로 관찰된 것은 전처리 조건이 더 가혹해 지면 Lignin의 제거율이 가장 큰 영향을 받았으며, 47.6~70.6% 범위로 나타났다. 반면 다른 당(Glucan, Xylan)은 손실이 비교적 작게 나타났다. 모든 실험 조건에서, 전처리된 고형물의 Glucan 손실율은 4.7~15.2% 범위로 변화가 크지 않았으며 Xylan 손실율은 여러 조건의 변화에 따라 7.4~25.8% 정도 범위로 나타났다. 암모니아 순환 전처리로 8~12 hour 동안 처리된 옥수수대는 90.1~94.5%의 높은 72-h Glucan 당화율을 (15 FPU-GC220+30 CBU)/g-glucan의 효소 투입으로 나타냈으며 순수 Cellulose인 Avicel의 당화율(92.7%)과 비슷하거나 높았다. 또한 8~12 hour 처리된 옥수수대의 초기 24-h Glucan 당화속도는 73.0~79.4%로 Avicel의 같은 시간 당화율인 69.5% 보다 높게 나타났다. 반응시간을 증가는 보다 많은 Lignin을 제거하였으며 따라서 효소 당화율 증가에 기인한 것으로 보인다.

• Geomechanics and Engineering
• /
• 제33권2호
• /
• pp.141-154
• /
• 2023

This study investigated the effect of water retention characteristics between aged and fresh Municipal Solid Waste (MSW) on the stability of the landfill. A series of transient numerical modeling for the slope of an MSW landfill was performed considering the variation of water retention characteristics due to leachate circulation. Four different scenarios were considered in this analysis depending on how to obtain hydraulic conductivity and the aging degree of materials. Unsaturated hydraulic properties of the MSW used for the modeling were evaluated through modified hanging column tests. Different water retention properties and various landfill conditions, such as subgrade stiffness, leachate injection frequency, and gas and leachate collection system, were considered to investigate the pore water distribution and slope stability. The stability analyses related to the factor of safety showed that unsaturated properties under those varied conditions significantly impacted the slope stability, where the factor of safety decreased, ranging between 9.4 and 22%. The aged materials resulted in a higher factor of safety than fresh materials; however, after 1000 days, the factor of safety decreased by around 10.6% due to pore pressure buildup. The analysis results indicated that using fresh materials yielded higher factor of safety values. The landfill subgrade was found to have a significant impact on the factor of safety, which resulted in an average of 34% lower factor of safety in soft subgrades. The results also revealed that a failed leachate collection system (e.g., clogging) could result in landfill failure (factor of safety < 1) after around 298 days, while the leachate recirculation frequency has no critical impact on stability. In addition, the accumulation of gas pressure within the waste body resulted in factor of safety reductions as high as 24%. It is essential to consider factors related to the unsaturated hydraulic properties in designing a landfill to prevent landfill instability.

• 한국식품영양학회지
• /
• 제4권2호
• /
• pp.141-148
• /
• 1991

In order to Investigate the extraction mechanism of barley tea in cylindrical packed column, pilot plant scale packed column was designed and constructed. And extraction conditions for steady flow in the packed column were searched. The main results of this study are as follows ; 1. Circulation of the stock barley tea before the extraction running was indispensable In consideration of inequality, gas, particles existed in packed bed. Solid-liquid equilibrium was initially maintained after the circulation. 2. Flow direction of solvent must be up-flow for maintaining the constant bed height and flow rate during the extraction. Paessure drop in pucked bed was similar to decrease ratio of extract concentration. 3. The porosity of packed bed was in the range of 0.24∼0.36 according to the particle sloe. And it was decreased as the particle size became smaller.

• Korean Chemical Engineering Research
• /
• 제48권4호
• /
• pp.499-505
• /
• 2010

본 연구에서는 두 개의 기포유동층으로 구성된 연속장치(높이: 1.2 m, 내경: 0.11 m)를 이용하여 실험장치의 최소유동화속도와 고체순환량을 측정하여 수력학적 특성을 파악하고 흡수-재생 조업변수에 의한 반응특성을 알아보았다. 사용된 K-계열 건식흡수제는 한국전력연구원으로부터 공급되었고 $CO_2$ 흡수를 위한 35%의 탄산칼륨과 기계적 강도를 위한 65%의 지지체로 구성되어 있다. 연속 장치는 두 개의 기포유동층 반응기, 수송관, 상승관, 냉각장치, 분석기, 히터 등으로 구성되어 있다. 이 장치의 최소유동화속도는 0.0088 m/s이고 수송관의 유속이 1.05 m/s일 때 고체순환량은 $10.3kg/m^2{\cdot}s$로 측정되었다. 모사가스를 이용하여 실험을 수행하였고 흡수반응기 입구 $CO_2$ 농도(Dry basis)는 약 10 vol%였고, 온도는 흡수반응온도 $70^{\circ}C$, 재생반응온도 $200^{\circ}C$에서 각각 일정하게 유지하였다. 반응기의 차압은 흡수반응기 $415mmH_2O$, 재생반응기 $350mmH_2O$에서 안정적으로 유지하였다. 실험은 조업변수들인 $H_2O$ 주입농도(7.28~19.66%), 모사가스 유속(0.053~0.103 m/s), 흡수반응온도($60{\sim}80^{\circ}C$), 재생반응온도($150{\sim}200^{\circ}C$), 고체순환량($7.0{\sim}10.3kg/m^2{\cdot}s$)의 변화에 따라 반응실험이 실시되었다. 각 변수실험은 정상상태 도달 후 1시간 정도 유지한 후 결과를 저장, 분석하였다. 실험결과 수증기 주입량, 재생반응온도, 고체순환량이 증가할수록 제거율은 증가하였고 흡수반응온도, 유속이 증가함에 따라 제거율은 감소하였다.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 1990년도 추계학술발표회논문집
• /
• pp.53-56
• /
• 1990

When oil flows and rubs against various materials in transformer, electrostatic charges are separated at the interface of the oil and the solid material. Using simplified model transformer, authors investigated the basic characteristics of the streaming electrifica-tion which is caused by forced oil circulation. As the result of the study, it was concluded that the electrostatic charge distribution on test pipe of the transformer showed larger leakage current at the inlet and the outlet.