• Bulletin of the Korean Chemical Society
• /
• 제35권8호
• /
• pp.2257-2262
• /
• 2014

$C_{60}$ is widely investigated because of its unique structure. But its applications in solid propellant seem to be relatively neglected. $C_{60}$ has more outstanding features than carbon black which is widely used as a catalyst ingredient of solid propellant. To combine the advantages of fullerene and lead salts, another good composite in propellant catalysts, we synthesized a kind of fullerene phenylalanine lead salt (FPL) and explored its thermal performances by differential thermal analysis (DTA) and thermogravimetry analysis (TGA). The results show it undergoes four exothermic processes started from 408 K. Combined TGA and X-ray diffractometer (XRD), the decomposition mechanism of FPL was derived by TG-IR and comparing IR spectra of FPL and its residues after burned to $327^{\circ}C$, $376^{\circ}C$ and $424^{\circ}C$, respectively. Effect of FPL on the decomposition characteristic of hexogen (RDX), a type of explosive in propellant, has been investigated using DTA at different heating rate, which shows the decomposition temperatures of the explosive are all reduced by more than 20 K. The corresponding activation energy ($E_a$) is decreased by $30kJ{\cdot}mol^{-1}$. So FPL has potential application as a combustion catalyst in solid propellant.

• Bulletin of the Korean Chemical Society
• /
• 제33권5호
• /
• pp.1457-1464
• /
• 2012

An ecofriendly catalytic route for selective synthesis of $N$-substituted azacyclopentanes, nitrogen-containing heterocyclic intermediates for many bioactive compounds, was established by carrying out $N$-heterocyclization (di $N$-alkylation) of primary amines with 1,4-dichloro butane (as dialkylating agent) using catalytic amount of hydrotalcite as solid base catalyst. The hydrotalcite was found to be efficient solid base catalyst for di $N$-alkylation of different primary amines (aniline, benzyl amine, cyclohexyl amine and n-butyl amine) giving 82 to 96% conversion (at optimized reaction condition) of 1,4-dichloro butane and > 99% selectivity of respective $N$-substituted azacyclopentanes within 30 min. under solvent free condition. The reaction parameters significantly influence the conversion of 1,4-dichloro butane to $N$-substituted azacyclopentanes. The nature of substituent present on amino group affects the reactivity of amine substrates for di $N$-alkylation reaction with 1,4-dichloro butane. The 1,4-dichloro butane was found to be highly reactive alkylating agent for di $N$-alkylation of amines as compared to 1,4-dihydroxy butane. The reusability of the catalyst and its chemical stability in the reaction was demonstrated.

• Bulletin of the Korean Chemical Society
• /
• 제35권1호
• /
• pp.141-146
• /
• 2014

A series of bimetallic Cu-Zn/$SiO_2$ catalysts were prepared via thermal decomposition of the as-synthesized $CuZn(OH)_4(H_2SiO_3)_2{\cdot}nH_2O$ hydroxides precursors. This highly dispersed Cu-solid base catalyst is extremely effective for hydrogenation of ethyl acetate to ethanol. The reduction and oxidation features of the precursors prepared by coprecipitation method and catalysts were extensively investigated by TGA, XRD, TPR and $N_2$-adsorption techniques. Catalytic activity by ethyl acetate hydrogenation of reaction temperatures between 120 and $300^{\circ}C$, different catalyst calcination and reduction temperatures, different Cu/Zn loadings have been examined extensively. The relation between the performance for hydrogenation of ethyl acetate and the structure of the Cu-solid base catalysts with Zn loading were discussed. The detected conversion of ethyl acetate reached 81.6% with a 93.8% selectivity of ethanol. This investigation of the Cu-Zn/$SiO_2$ catalyst provides a recently proposed pathway for ethyl acetate hydrogenation reaction to produce ethanol over Cu-solid base catalysts.

• 대한화학회지
• /
• 제56권6호
• /
• pp.712-715
• /
• 2012

A simple and clean synthesis of polysubstituted 2,6-dicyanoanilines has been developed via the reaction of arylidenemalonodinitriles with 1-arylethylidenemalonodinitriles in ethanol catalyzed by KF/alumina. Use of non-hazardous solid base as a catalyst, operational simplicity and improved product yields are the key advantages of the present protocol.

• Korean Chemical Engineering Research
• /
• 제54권1호
• /
• pp.64-69
• /
• 2016

바이오디젤 공정에서 비균일상 촉매는 생성물의 회수를 쉽게 하며 촉매를 재사용하는 장점이 있기 때문에 최근 연구가 활발히 진행되고 있다. 본 연구에서는 $K_2CO_3/{\gamma}-Al_2O_3$ 촉매를 이용한 바이오디젤 생성 반응에서 촉매의 소성온도가 반응활성에 미치는 영향을 살펴보았다. 소성온도가 $600^{\circ}C$까지 높아짐에 따라 촉매의 활성이 높아졌으며, 그 이상의 온도에서는 촉매의 활성이 급격히 감소하여 소성온도가 촉매의 활성에 매우 중요한 영향을 주는 것을 확인하였다. 고온에서 이와 같은 활성감소는 Al-O-K와 $Al-O_2-K$인 활성자리의 감소가 원인이었던 것으로 추정되었다.

• Bulletin of the Korean Chemical Society
• /
• 제33권8호
• /
• pp.2724-2730
• /
• 2012

A new heterogeneous acidic catalyst was successfully prepared by impregnation of silica (Aerosil 300) by an acidic ionic liquid, named 1-(4-sulfonic acid)butylpyridinium hydrogen sulfate [$PYC_4SO_3H$][$HSO_4$], and characterized using FT-IR spectroscopy, the $N_2$ adsorption/desorption analysis (BET), thermal analysis (TG/DTG), and X-ray diffraction (XRD) techniques. The amount of loaded acidic ionic liquid on Aerosil 300 support was determined by acid-base titration. This new solid acidic supported heterogeneous catalyst exhibits excellent activity in the synthesis of 2-aryl-2,3-dihydroquinazolin-4(1H)-ones by cyclocondensation reaction of 2-aminobenzamide with aromatic aldehydes under solvent-free conditions and the desired products were obtained in very short reaction times with high yields. This catalyst has the advantages of an easy catalyst separation from the reaction medium and lower problems of corrosion. Recycling of the catalyst and avoidance of using harmful organic solvent are other advantages of this simple procedure.

• KSBB Journal
• /
• 제19권3호
• /
• pp.215-220
• /
• 2004

2-아릴프로피온산 계열의 키랄 의약품의 효소적 dynamic kinetic resolution (DKR) 공정에서 라세미화 염기촉매로 트리 옥틸아민이 지금까지 주로 사용되어 왔으나 반응매질에 녹은 상태로 작용해 회수 및 재사용이 어려웠다. 본 연구에서는 이를 개선하고자 라세미화 반응을 위한 고효율 고체 염기를 탐색해 보았다. 45$^{\circ}C$, 아이소옥탄 내에서 (S)-나프록센 2,2,2-트리플로로에틸 씨오에스터를 기질로 무기 염기류, 염기성음이온교환수지류, resin-bound 염기류 등을 시험한 결과, 약염기성 음이온교환수지인 DIAION WA30을 사용하였을 때 가장 효과적이었다. DIAION WA30의 2차 interconversion constant ( $k_{int}$$^＊/)는 8.6${\times}$$10^{-4}$ m $M^{-1}$ $h^{-1}$이며 동일한 실험조건하에서 수행한 트리옥틸아민 ( $k_{int}$$^＊/ = 2.5${\times}$$10^{-4}$ m $M^{-1}$ $h^{-1}$)에 비해 약 3배가 높았다. 효소 활성에 필수적인 물의 양에 따른 DIAION WA30의 라세미화 효율에 관하여 실험한 결과, 물의 양이 증가할수록 그 효율은 감소하였다. DIAION WA30을 라세미화 촉매로 사용하여 아이소옥탄 내에서 라세믹 나프록센 2,2,2-트리플로로에틸 씨오에스터의 효소적 DKR 반응을 수행해 보았다. 그 결과 DIAION WA30을 사용하지 않은 경우에 비해 반응 전환율과 생성물의 광학 순도는 급격히 향상되었다. 전통적 광학분할 반응의 최대 50%라는 전환율의 제한이 본 연구에서 찾은 DIAION WA30을 첨가함으로써 성공적으로 극복되었다. 또한 고체 염기촉매인 DIAION WA30의 사용은 라세미화 촉매의 회수 및 재사용이 가능하게 해준다.다.다.다.다.다.

• Bulletin of the Korean Chemical Society
• /
• 제29권11호
• /
• pp.2202-2204
• /
• 2008

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.570-574
• /
• 1999

In this paper, by using the electrophoresis, preparation of YBCO superconducting wire deposited on metal Ag base wire was studied with its Properties. YBCO Powder could be prepared by solid state reactions with calcining and sintering processes. Superconducting wire prepared on metal Ag wire used as cathode of deposition base could be also fabricated in the YBCO/acetone-dispersed solution to obtain several tens of re thick films. And then it could be used as superconducting wire for measurement after calcination, sintering and oxygen absorption processes. In the process of film deposition, a catalyst I$_2$added into the suspension solution was very useful for preparing thick film of YBCO, and BaF$_2$ of additive material was also necessary for preparing crack-free wire of YBCO superconductor. As a result, YBCO superconducting wire added 2~3wt.% of BaF$_2$\ulcorner with catalyst, 12 had better deposition condition for uniform and dense YBCO wires, and critical current density, Jc was calculated at the value of 1,458A/$\textrm{cm}^2$(more than 10$^{3}$A/$\textrm{cm}^2$ ,77K, o[T]) of 30${\mu}{\textrm}{m}$ thick sample by 4 point prove method.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2007년도 제28회 춘계학술대회논문집
• /
• pp.225-228
• /
• 2007

본 연구는 로켓 모타의 추진제 점화 특성을 살펴보는 데 그 목적이 있으며 아크 이미지 고온 오븐을 사용하여 혼합형, 복기 그리고 니트라민 추진제를 대상으로 압력 변화에 따라서 점화지연시간을 측정하였다. 추진제 표면의 반사에너지를 측정하기 위해 광섬유 표면 반사계를 사용하였다. 추진제 점화성은 복기 추진제 > 혼합형 추진제 > 니트라민 추진제 순이었으며, 니트라민 추진제 점화에 가장 큰 점화 에너지가 필요했으나 압력이 $75{\sim}400$ psia 범위로 상승함에 따라 점화 지연 시간은 급격히 감소하였다. 소량의 오페시화이어를 첨가함으로써 흡수도를 증가시킬 수 있었다.