• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.2
• /
• pp.177-182
• /
• 2000

Composite insulation system of liquid nitrogen and solid spacer is widely applied in high temperature superconduction power machine. This study has three step procedure. As follow, first step is composition of parallel deposited electrode and vertically deposited electrode along the direction of immersion in liquid nitrogen(LN2). Second step is investigation into surface flashover voltage of solid spacer under partially immersed in LN2, and last step is comparison the result of this research with that of fully immersed in LN2 and at cryogenic temperature gaseous nitrogen(GN2). This result presented that surface flashover voltage along solid spacer half immersed in LN2 was almost the same as that of fully immersed spacer when the thickness of spacer(t) was t<10mm. In the case of t> 10mm, however, spacer flashover voltage was equal to that obtained in GN2 at cryogenic temperature. And the immersed direction functions as role of deciding the difference of surface flashover voltage.

• Proceedings of the KIEE Conference
• /
• 1999.11d
• /
• pp.912-914
• /
• 1999

Composite insulation system of liquid nitrogen and solid spacer is widely applied in high temperature superconducting power machine. This study has three step procedure. As follow, first step is composition of parallel deposited electrode and vertically deposited electrode along the direction of immersion in liquid nitrogen($LN_2$). Second step is investigation into surface flashover voltage of solid spacer under partially immersed in $LN_2$, and last step is comparison the result of this research with that of fully immersed in $LN_2$ and at cryogenic temperature gaseous nitrogen($GN_2$). This result presented that surface flashover voltage along solid spacer half immersed in $LN_2$ was almost the same as that of fully immersed spacer when the thickness of spacer(t) was t<10 mm. In the case of t>10 mm, however, spacer flashover voltage was equal to that obtained in $GN_2$ at cryogenic temperature.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.6
• /
• pp.467-473
• /
• 2012

A functionally graded material (FGM) spacer, which the distribution of dielectric permittivity inside an insulator changes spatially, can considerably reduce the electric field concentration around a high-voltage electrode and along the gas-insulator interface when compared to a conventional spacer with a uniform permittivity distribution. In this research, we propose the FGM spacer with an elliptical permittivity distribution instead of that with a distribution of dielectric permittivity varying along a radial direction only in order to improve efficiently the insulation capability. The optimal design of the elliptical FGM spacer configuration is performed by using the response surface methodology (RSM) combined with the steepest descent method (SDM).

• Textile Coloration and Finishing
• /
• v.5 no.2
• /
• pp.109-116
• /
• 1993

Synthesis and liquid-crystallinites of thermotropic polyamides and copolyamides were investigated. Thermotropic polyamides and copolyamides containing a flexible spacer in the backbone were obtained by the two or three components melt polycondensations of 4,4'-dicarboxy-${\alpha}$${\omega}$-diphenoxy alkane as an A components, 4,4'-diacetoamido-3,3' dimethoxybiphenyl as a B, 1,4-diacetoamido-benzene (diacetylated p-phenylenediamine) was used as another amide-group-forming minomer. The content of the amide groups in the thermotropic polyamide and Copolyamide widely varied depending on the structure of the amide-group forming diacetoamido monomers. A polymer (9CLDI) showed a typical nematic texture between 218$^{circle}C$ ($T_m$) and 345$^{circle}C$($T_i$) The melting points of the members of this series of polymers increased with decreasing methylene spacer. The polymer structure and mesmorphic nature were examined by solid and solution ${^13}C$-NMR spectroscopy, cross polarizing microscopy with a hot stage.

• Textile Coloration and Finishing
• /
• v.3 no.1
• /
• pp.28-36
• /
• 1991

Thermotropic behavior was observed in a number of aromatic copoly (ester amide)s containing a flexible spacer based on 4,4'$-dicarboxyalpha,\varpi-diphenoxy$ alkanes as an A component, di-acetylated p-aminophenol as a B, di-acetylated hydroquinone as a C gave the thermotropic copoly (ester amide)s containing a flexible spacer in the polymer backbone. 4,4'-diamino-3,3'-dimethoxybiphenyl as an amino group containing monomer as a D components. In the last case, up to 60 mol% of amide group was allowed to afford thermotropic liquid-crystallinity. The polymer structure and thermotropic nature were examined by solid-state and solution $^{13}C$ NMR spectroscopy, differential scanning calorimeter, polarizing microscopy, and IR spectroscopy.

• Proceedings of the KIEE Conference
• /
• 1996.07a
• /
• pp.65-67
• /
• 1996

The spacer is solid insulator which supports main conductor in GIS and seperates gas area. The 800kV spacer was designed and manufactured considering the results of electrical and structural analysis using commercial package MSC/NASTRAN. Temperature test and water pressure test were carries out, and the results from water pressure test were compared with the calculated ones from MSC/NSATRAN.

• Journal of Hydrogen and New Energy
• /
• v.30 no.6
• /
• pp.540-548
• /
• 2019

This study was conducted to develop insulation for solid oxide fuel cell (SOFC). The developed insulation is based on the lamination technology and the radiation shielding technology of the satellite insulation. The insulation material is consisting of insulation material for conduction resistance, spacer, and radiation shielding material. The experimental apparatus consisting vacuum bell jar, pump, heater and temperature recording device has developed to verify the performance of the insulation. The experimental values were used as reference data for the modeling development. In this paper, heat transfer is assumed to be one- dimensional phenomena for the prediction of insulation performance and internal temperature distribution in high temperature region of SOFC. The developed model was used to compare the performance difference of insulation types according to composition materials. The analysis result shows that the insulation including spacer and radiation shielding has better heat insulation performance than other cases. In this study, the thickness reduction effect of about 20% was shown compared to the insulation including only conductive material. It is noted that the radiant shielding material should be carefully selected for durability, because SOFC insulation should be used for a long time at high temperature.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.9
• /
• pp.1181-1188
• /
• 2018

In order to develop new insulating materials for GIS Spacer using environmentally friendly insulating gas, three kinds of dispersed liquid nano composites of solid epoxy /nano layered silicate filled material were prepared. And the epoxy/nano/micro silica composite was prepared by mixing epoxy/nano 3 phr dispersion/4 kinds of filler contents(40,50,60, 70wt%). The electrical insulation breakdown strengths of the nano and nano/micro mixed composites were evaluated by using 8 kinds of samples including the original epoxy. The mechanical tensile strength of the epoxy / nano / micro silica composite were evaluated, also. The TEM was measured to evaluate the internal structure of nano/micro composites. As a result, it was confirmed that the layered silicate nano particles was exfoliated through the process of inserting epoxy resin between silicate layers and the layers. In addition, dispersion of nano / micro silica resulted in improvement of electrical insulation breakdown strength with increase of filling amount of dense tissue with nanoparticles inserted between microparticles. In addition, the tensile strength showed a similar tendency, and as the content of microsilica filler increased, the mechanical improvement was further increased.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.46 no.6
• /
• pp.8-15
• /
• 2014

The increase of wet web solid content in wet pressing will save drying energy greatly. We applied wood flours as spacers to increase the old corrugated container (OCC) solid contents in wet pressing. The mixed furnish of OCC and wood flours of 3-5% (wt/wt) increased bulk and drainage rate, and by increasing wet pressing pressure, its solid content started to be higher than 100% OCC furnish at more than 50% solid content level. Addition of cationic starch and drainage aid to the mixed furnish increased solid content further up to around 2%. Cationic starch addition compensated or exceeded the loss of tensile and compressive strength caused by the addition of wood flour, but drainage aid did not. Cationic starch also improved the stretch of the OCC, which could mitigate cracking at folding in boxboard.

• Textile Coloration and Finishing
• /
• v.2 no.4
• /
• pp.237-244
• /
• 1990

Syntheses and liquid-Crystallinites of thermotropic copoly (ester amide)s were investigated. The three components melt polycondensation of 4,4'-dicarboxy-$\alpha$, $\omega$-diphenoxyalkane as an A component, 4-4'diacetoxybiphenyl as a B, and p-N-acetoxy-aminobenzoic acid as a C gave the thrmotropic copoly(ester amide)s containing a flexible splacer in the polymer backbone. Diacetylated hydroquinone, methyl hydroquinone, chlorohydroquinone, and phenyl hydroquinone were used as anther B components. A polymer(6BPAB) having 10 mol% of C component and hexamethylene space. showed a typical nematic texture between $245^{\circ}C(T_m)\; and\; more\; than\; 360^{\circ]C(T_i)$. The melting points of the members of this series of polymers increased with decreasing methylene spacer. The polymer structure and mesomorphic nature were examined by solid and solution ^{13}C-NMR4 spectroscopy, cross polarizing microscopy with a hot stage, and X-ray diffactometry.