References
- S. K. Dong, W. N. Jeong and K. Rashid, "Numerical Analysis of various types SOFC stack used in SOFC system", SAREK, 2014, pp. 827-831. Retrieved from https://dbpia.co.kr/journal/articleDetail?nodeId=NODE06065022.
- Y. W. Lo, W. C. J. Wei, and C. H. Hsueh, "Low thermal conductivity of porous Al2O3 foams for SOFC insulation", Material Chemistry and Physics Vol. 129, No. 1-2, 2011, pp. 326-330, doi: https://doi.org/10.1016/j.matchemphys.2011.04.023.
- M. Chnani, M. C. Péra, R. Glises, J. M. Kauffmann, and D. Hissel, "Transient thermal behaviour of a solid oxide fuel cell", The Fifth International Conference on Fuel Cell Science, Engineering and Technology, 2007, pp. 28. Retrieved from https://hal.archives-ouvertes.fr/hal-00582364/.
- K. J. Kattke and R. J. Barun, "Implementing Thermal Management Modeling Into SOFC System Level Design", J. Fuel Cell Sci. Technol., Vol. 8, No. 2, 2011, pp. 021009, doi: https://doi.org/10.1115/1.4002233.
- L. Barelli, G. Bidini, G. Cinti, and A. Ottaviano, "SOFC regulation at constant temperature: Experimental test and data regression study", Energy Conversion and Management, Vol. 117, 2016, pp. 289-296, doi: https://doi.org/10.1016/j.enconman.2016.03.028.
- D. L. Damm and A. G. Fedorov, "Radiation heat transfer in SOFC materials and components", Journal of Power Sources, Vol. 143, No. 1-2, 2005, pp. 158-165, doi: https://doi.org/10.1016/j.jpowsour.2004.11.063.
- R. Coquard, D. Baillis, and J. Randrianalisoa, "Homogeneous phase and multi-phase approaches for modeling radiative transfer in foams", International Journal of Thermal Sciences Vol. 50, No. 9, 2011, pp 1648-1663, doi: https://doi.org/10.1016/j.ijthermalsci.2011.04.012.
- M. Spinnlera, E. R. F. Wintera, R. Viskantab and T. Sattelmayera, "Theoretical studies of high-temperature multilayer thermal insulations using radiation scaling", Journal of Quantitative Spectroscopy & Radiative Transfer, Vol. 84, 2004, pp. 477-491. https://doi.org/10.1016/S0022-4073(03)00264-4
- ASTM C177-19, "Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus", ASTM International, doi: https://doi.org/10.1520/C0177-19.
- KS L ISO 8302, "Thermal insulation Determination of Steady-state thermal resistance and related properties-Guarded hot plate apparatuses", KS Standard, ICS: https://www.iso.org/ics/27.220/x/.
- A. J. Slifka, B. J. Filla, and J. M. Phelps, "Thermal Conductivity of Magnesium Oxide From Absolute, Steady-State Measurements", J. Res. Natl. Inst. Stand Technol., Vol. 103, No. 4, 1998, pp. 357-363, doi: https://doi.org/10.6028/jres.103.021.
- Y. Haim, Y. Weiss, and R. Letan, "Effect of spacers on the thermal performance of an annular multi-layer insulation", Applied Thermal Engineering, Vol. 65 No. 1-2, 2014, doi: https://doi.org/10.1016/j.applthermaleng.2014.01.041.
- F. P Incropera, D. P Dewitt, T. L. Bergman, and A. S. Lavine, "Introduction to Heat Transfer", Heisenbooks, USA, 2006, 5th ed.