• 한국초전도ㆍ저온공학회논문지
• /
• 제16권4호
• /
• pp.53-56
• /
• 2014

A numerical method of magnetic field calculation for the air-core solenoid is presented in this paper. In application of the Biot-Savart law, the magnetic field induced from the source current can be obtained by a double integration ormula. The numerical method named composite Simpson's rule for the integration is applied to the program and the adaptive quadrature method is used to adjust the step size in the calculation according to the precision we need. When the target point is in the solenoid and the intergrand's denominator may be zeroin the process of calculation, the method sill can provide an appropriate result. We have developed a program which calculates the magnetic field with at least 1ppm precision and named it as rzBI() to implement this method. The method has been used in the design of an MRI magnet, and the result show it is very flexible and convenient.

• 전기학회논문지
• /
• 제65권11호
• /
• pp.1848-1853
• /
• 2016

Control Rod Position Indicator in nuclear reactor vessel has developed for small reactor in Korea. Because of severe environment in reactor vessel, target of this study is to develop the suitable position indicator. In this study, solenoid type position indicator made of Mineral Insulated Cable(MI Cable) was introduced to adapt in severe environment. And inductance of the solenoid was used to indicate the rod position for high precision. But problem of this concept is that a linear slope of inductance is changed by temperature effect. To resolve this problem, two sensing coils were introduced for temperature compensation. A role of the sensing coil is to make reference linear equation about certain temperature. To confirm this concept, also, inductance of solenoid and sensing coils were measured at room and high temperature (${\sim}300^{\circ}C$). The results of measurement show that the position error of sensing coil between room and high temperature was about 2%. But it was identified that this error was resulted from insufficient test environment (temperature error between solenoid and sensing coils was about 2% at high temperature condition). Therefore, solenoid type position indicator shows that it is very suitable in reactor vessel as a high precision rod position indicator.

• 한국가스학회지
• /
• 제21권5호
• /
• pp.9-15
• /
• 2017

천연가스 연료는 매장량과 경제성 측면에서 미래 가치가 매우 높기 때문에 여러 가지 이용 기술 개발이 활발하게 이루어지고 있으며 내연기관을 이용한 발전 분야에서도 그 중요성이 점점 증가하고 있는 실정이다. 천연가스 연료를 이용하는 MW급 발전용 대형 왕복엔진의 경우 연료공급시스템의 고도화 개발이 필요한데 그 중에서도 천연가스 분사기의 개발은 실질적인 천연가스 연료 이용을 위한 핵심이다. 본 연구에서는 천연가스 분사기를 상부에 위치한 솔레노이드의 전자기력에 의해 구동되고 하부의 밸브 바디부 전기자와 이동판이 상하로 움직이는 구조의 분사밸브 형태로 고안 및 설계하였으며 이 시작품의 동특성을 엔진 흡기 모사 조건에서 실험하였다. 지난 연구에서는 전기자의 변위와 지름 및 솔레노이드 코어 지름을 변경해 가면서 실험을 수행하였으며, 그 후속으로 솔레노이드 코어의 금속 재질 변경과 메인 하우징의 입구 크기 및 공급 압력에 따른 분사밸브의 동특성을 살펴보았다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제2권4호
• /
• pp.295-301
• /
• 2002

In this paper, solenoid-type 3-D passives (inductors and transformers) have been designed, fabricated, and characterized by using electroplating techniques, wire bonding techniques, multi-layer thick photoresist, and low temperature processes which are compatible with semiconductor circuitry fabrication. Two different fabrication approaches are performed to develop the solenoid-type 3-D passives and relationship of performance characteristics and geometry is also deeply investigated such as windings, cross-sectional area of core, spacing between windings, and turn ratio. Fully integrated inductor has a quality factor of 31 at 6 GHz, an inductance of 2.7 nH, and a self resonant frequency of 15.8 GHz. Bonded wire inductor has a quality factor of 120, an inductance of 20 nH, and a self resonant frequency of 8 GHz. Integrated transformers with turn ratios of 1:1 and n:l have the minimum insertion loss of about 0.6 dB and the wide bandwidth of a few GHz.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제52권11호
• /
• pp.501-507
• /
• 2003

In this study, microscale, high-performance, solenoid-type RF chip inductors were investigated. The size of the RF chip inductors fabricated in this work was 1.0${\times}$0.5${\times}$0.5㎣. 96% $Al_2$ $O_3$and I-type were used as the material and shape of the core, respectively. The copper (Cu) wire with 6 turns was employed as the coils. The diameter (40${\mu}{\textrm}{m}$) and position (middle) of the coil and the length (0.35mm) of solenoid were determined by a high-frequency structure simulator (HFSS) to maximize the performance of the inductors. High frequency characteristics of the inductance (L) and quality-factor (Q) of developed inductors were measured using an RF Impedance/Material Analyzer (HP4291B with HP16193A test fixture). The inductors developed have inductances of 10.8nH and quality factors of 25.2 to 50 over the frequency ranges of 250MHz to l GHz, and show results comparable to those measured for the inductors prepared by CoilCraf $t^{Tm}$ . The simulated data predicted the high-frequency data of the L and Q of the inductors developed well.l.

• 한국전기전자재료학회논문지
• /
• 제13권10호
• /
• pp.840-846
• /
• 2000

In this work, small-size, high-performance solenoid-type RF chip inductors utilizing a low-loss Al$_2$O$_3$core material were investigated. The size of the chip inductors fabricated in this work were 15$\times$10$\times$0.7㎣, 2.1$\times$1.5$\times$10㎣, and 2.4$\times$2.0$\times$1.4㎣ and copper (Cu) wire with 40 ㎛ diameter was used as the coils. High frequency characteristics of the inductance, quality factor, and impedance of developed inductors were measured suing an RF Impedance/Material Analyzer (HP4291B with HP16193A test fixture). It was observed that the developed inductors with the number of turns of 7 have the inductance of 33 to 100nH and exhibit the self-resonant frequency (SRF) of .26 to 1.1 GHz. The SRF of inductors decreases with increasing the inductance and the inductors have the quality factor of 60 to 80 in the frequency range of 300 MHz to 1.1 GHz. In this study, small-size solenoid-type RF chip inductors with high inductance and high quality factor were fabricated successfully. It is suggested that the thin film-type inductor is necessary to fabricate the smaller size inductors at the expence of inductance and quality factor values.

• 한국산업융합학회 논문집
• /
• 제24권5호
• /
• pp.537-546
• /
• 2021

Remanufacturing is one of the most important resource recycling technology in response to resource depletion and environmental pollution. Domestic remanufacturing industry don't invigorate compared to other advanced countries because of low price and reliability of remanufactured product. In this study, remanufactured hydraulic pump and solenoid valve were evaluated durability by accelerated life test. In order that standard remanufacturing process was developed by core analysis and failure mode and effect analysis. And cores were remanufactured by standard remanufacturing process. For accelerated life test, the evaluation item and criteria were deduced by results of FMEA, reliability standards and enterprise interior criteria. To evaluate durability of remanufactured product, the remanufactured hydraulic pump and solenoid valve were evaluated performance after accelerated life test and the results were satisfied with criteria. This study showed that remanufactured products have a similar level of durability to new products by definition of remanufacturing.

• 대한전자공학회논문지SD
• /
• 제37권6호
• /
• pp.34-42
• /
• 2000

우수한 성능을 가지며 소형${\cdot}$경량인 무선통신기기를 구현하기 위해서는 GHz 대의 고주파수에서 동작하는 소형 RF chip 인덕터의 개발은 중요한 연구분야가 되어왔다. 또한 최근 많이 사용되는 자성 ferrite core 재료는 300MHz 이상의 주파수영역에서 자화율이 급속하게 감소하여 고성능 RF chip 인덕터 개발에 큰 장애가 되고 있다. 따라서 본 논문에서는 비정질 $Al_2O_3$ 코아 재료를 응용한 단순 solenoid 형태의 소형${\cdot}$고성능 RF chip 인덕터를 연구하였다. Cu를 코일 (직경=40${\mu}m$)로 사용하였고 인덕터 크기는 $2.1mm{\times}1.5mm{\times}1.0mm$였다. 외부 전류원은 코일의 양단을 코아 가장자리에 적층된 Au 막에 본딩시킨 후 인가되었다. 코아의 성분은 EDX를 사용하여 분석하였다 개발된 인덕터의 인덕턴스 (L), quality factor (Q), 인피던스(Z)등의 주파수 특성은 RF impedance/Material Analyzer (HP16193A test fixture가 장착된 HP4291B)로 측정되었다. 인덕터들의 인덕턴스 값은 22 nH ~ 150 nH 범위를 가지며, 이들의 자기공진주파수 (SRF)는 1~3.5GHz 영역을 나타낸다. 또한 자기공진주파수가 증가함에 따라 인덕턴스 값이 감소하는 경향을 보이고 있다. 임피던스는 공진주파수에서 최대 값을 가지며 Q-factor의 값은 500 MHz ~ 1.5 GHz 주파수 범위에서 최대 70~97까지 얻어졌다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 춘계학술대회 논문집
• /
• pp.659-660
• /
• 2009

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.225-225
• /
• 2010

In this study, the optimum structure of a magnetic thin film inductor was designed for application of DC-DC converters. The $Ni_{81}Fe_{19}$ (at%) alloy was selected as a high-frequency($\geq$ MHz) magnetic thin film core material and deposited on various substrates (bare Si, $SiO_2$ coated Si) using a high vacuum RF magnetron sputtering system. As-deposited NiFe thin films show similar magnetic properties compared to bulk NiFe alloys, indicating that they have a good film quality. The optimum design of solenoid-type magnetic thin film inductors was performed utilizing a Maxwell computer simulator (Ansoft HFSS V7.0 for PC) and parameters obtained from the magnetic properties of magnetic core materials selected. The high-frequency characteristics of the inductance(L) and quality factor(Q) obtained for the designed inductors through simulation agreed well with those obtained by theoretical calculations, confirming that the simulated result is realistic. The optimum structure of high-performance ($Q{\geq}60$, $L\;=\;1{\mu}H$, efficiency${\geq}90%$), high-frequency (${\geq}5MHz$), and solenoid-type magnetic thin film inductors was designed successfully.