• 항공우주시스템공학회지
• /
• 제12권5호
• /
• pp.69-75
• /
• 2018

본 논문에서는 전기 접속부 역할을 하는 포고핀을 활용한 극초소형 위성용 나일론선 절단방식 태양전지판 분리장치를 제안하였다. 제안된 분리장치는 종래 나일론선을 이용한 분리장치에 비해 높은 체결력 및 횡/종방향 동시구속이 가능하고, 체결작업이 용이하며, 또한 다수의 태양전지판의 동시분리가 가능한 장점을 갖는다. 또한 제안된 분리장치에 적용된 포고핀은 전력공급을 위한 전기 접속부 기능과 함께 전개 상태 스위치 및 태양전지판의 분리 스프링 역할이 동시에 가능하다. 본 논문에서는 제안된 포고핀 분리장치의 기능성 입증을 위해 체결횟수에 따른 분리 기능시험을 통해 기능성을 검증하였다.

• 전기학회논문지
• /
• 제63권9호
• /
• pp.1312-1316
• /
• 2014

The color and the installation position of the LED lamp for night voyage of the ship are changed by the purpose of it. The power dissipation occurs because a navigation light is on and off or continuously on. In addition, in case that the light is produced by operating generator in the ship, it's very inefficient except that it's on a voyage. Therefore in this dissertation, we construct auxiliary power system for the LED lamp of the ship, producing and developing a module, a panel, and a charging system using Dye-sensitize Solar Cell.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1126-1127
• /
• 2008

A photovoltaic panel is a device that, through the photovoltaic effect, converts luminous energy into electric energy. Photovoltaic generation system used infinity of solar energy, cost of fuel is needless and there in no air pollution or waste occurrence. This paper summarizes the results of these efforts by offering a photovoltaic system structure in 30[kW] large scale applications installed in Mokpo National University dormitory roof. The status of photovoltaic system components, are inter-connection and safety equipment monitoring system will be summarized as this article. This describes configuration of utility interactive photovoltaic system which generated power supply for dormitory. In this paper represent 30[kW] utility photovoltaic system examination result.

• Advances in environmental research
• /
• 제1권2호
• /
• pp.125-142
• /
• 2012

Clean development mechanism (CDM) validity study was conducted to suggest better and more adaptable CDM scenario on water treatment plant (WTP). Potential four scenarios for CDM project; improvement of intake pumping efficiency, hydro power plant construction, solar panel construction and system optimization of mechanical mixing process were evaluated on S-WTP in Korea. Net present value (NPV) of each scenario was estimated based on sensitivity analysis with the variable factors to investigate the CDM validity percentile. Hydro power plant construction was the best option for CDM business with 97.76% validity and $1,127,069 mean profit by 9,813 $tonsCO_2e$/yr reduction. CDM validity on improvement of intake pumping efficiency was 90.2% with $124,305 mean profit by huge amount of $CO_2$ mitigation (10,347 $tonsCO_2e$/yr). System optimization of mechanical mixing process reduced 15% of energy consumption (3,184 $tonsCO_2e$/yr) and its CDM validity and mean profit was 77.25% and $23,942, respectively. Solar panel construction could make the effect of 14,094 $tonsCO_2$ mitigation annually and its CDM validity and mean profit was 64.68% and $228,487, respectively.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2009년 추계학술발표대회
• /
• pp.221-225
• /
• 2009

A solar thermal collector is a solar collector specifically intended to collect heat: that is, to absorb sunlight to provide heat. A flat plate is the most common type of solar thermal collector, and is usually used as a solar hot water panel to generate solar hot water. A flat plate collector consists basically of an insulated metal box with a glass or a plastic cover and a dark-colored copper absorber plate. Solar radiation is absorbed by the copper absorber plate and transferred to water that circulates through the collector in copper tubes. Ultrasonic welding is an industrial technique whereby high-frequency ultrasonic acoustic vibrations are locally applied to work pieces being held together under pressure to create a solid-state weld. In this study, we developed solar collector ultrasonic welding machine with digital controlled power supply and tested various welding conditions such as welding pressure, welding amplitude, welding speed. Welding speed was considered in 2~12m/min. The width of ultrasonic welds was increased with welding amplitude by 2.2~2.5mm. The fracture load of ultrasonic welds showed 20% higher than domestic products.

• 한국컴퓨터정보학회논문지
• /
• 제19권2호
• /
• pp.109-115
• /
• 2014

에너지의 고갈을 대비하여 자연을 이용한 태양에너지에 대한 연구는 매우 중대하고 필연적인 과제이다. 이와 더불어 최근 우리나라는 저탄소 녹색성장에 있어 신성장 동력산업의 일환으로 저소비전력, 환경친화적인 조명기구로 LED(Light Emitting Diode)를 선정하여 연구 개발을 촉진하고 이를 활용한 다양한 새로운 산업이 창출되고 있다. 본 개발 내용은 리튬 이온 배터리의 뛰어난 성능을 가지며 폭발 위험성이 현저히 적은 리튬 폴리머 전지를 사용한 태양광 LED 조명시스템을 개발하였다. 태양광 패널은 100W 용량으로 제작하고, 전원공급시스템은 다양한 생활전기로 사용할 수 있도록 직류(DC) 및 교류(AC) 전원을 모두 갖추어 기능상의 편의를 고려하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제34권4호
• /
• pp.455-459
• /
• 2010

에너지 위기에 대한 우려가 급격히 증가하고 있으며, 방대한 에너지소비에 따른 환경오염도 큰 문제로 대두되고 있다. 사회적으로 에너지 위기가 고조되고 있는 가운데 새로운 에너지나 신 재생에너지에 대한 관심이 증가하고 있다. 본 연구는 이러한 문제를 해결하기 위한 하나의 해결책으로 건물의 난방에 태양열을 적극적으로 이용하기 위한 태양열 흡열 다공판을 외벽에 설치하여 실내의 온도를 상승시키기 위한 실험을 정리한 논문이다.

• 대한조선학회논문집
• /
• 제53권4호
• /
• pp.290-299
• /
• 2016

The most powerful energy resource in nature is solar energy which becomes directly converted to electric power in worldwide. Most of the photovoltaic power plants are commonly installed on sunny side of the ground. Thus the installation of photovoltaic power plant could produce an unexpected adverse effect by sacrificing the productivity from green field or forest. To avoid these adverse effect floating photovoltaic plant has been devised and installed on inland reservoir. The photovoltaic plant could utilize ignored water surface without sacrificing the productivity of the ground. Additionally the photovoltaic efficiency has been reenforced by the cooling effect induced by the circulating air flow from water surface. The floating photovoltaic plant could be furnished solar tracking ability by tilting the system operated with the aid of the ballast system. This report is provided to introduce the design of the floating structure with solar panel which furnished solar tracking ability with the aid of ballast system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 추계학술대회 논문집 학회본부 A
• /
• pp.113-115
• /
• 2000

So far, it was very difficult to simulate the dispersed generation system including PV generation system using EMTP or EMTDC because the source of the dispersed generation system has a particular VI characteristic equation. In this paper, a novel simulation method of PV generation system has proposed and a new solar cell component for EMTDC is also developed. The VI characteristic equation of solar cell is used in order to realize the solar generation system in EMTDC simulation. Consequently the simulation of PV power generation system using field data is realized and acceptable results, which show close match between the real data of PV panel and the simulated data, were obtained.

• 생물환경조절학회지
• /
• 제23권3호
• /
• pp.221-228
• /
• 2014

본 연구는 염료감응형 태양전지를 이용하여 시간에 따른 일사량과 그에 따른 전력량의 분석을 통해 계절적 변화에 따른 온실 적용 염료감응형 태양전지의 효율에 관한 기초 자료 수집 및 분석을 목표로 하였다. 경상대학교 소재 온실 근처(위도 $35^{\circ}$ 9' 9.20" N, 경도 $128^{\circ}$ 5' 44.90" E, 고도 52m)에 태양전지 어레이를 설치, 2012년 8월, 10월, 11월, 2013년 2월 약 네 달 동안 태양전지가 받는 일사량과 그에 따른 전력량을 측정 및 비교, 분석하였다. 10월의 태양전지 패널 면적에 따른 일사량이 약 1,013.03MJ, 발생된 전력량은 약 4.87kWh로 네 달 중 가장 높게 측정되었고, 11월의 패널 면적에 따른 일사량이 약 755.25MJ, 발생 전력량은 약 3.34kWh로 가장 낮게 측정되었다. 염료감응형 태양전지의 평균 효율의 경우 8월 한 달간, 약 3.12%로 측정되었고, 10월 2.60%, 11월 2.39%, 2월 2.23%로 각각 측정되었다. 본 연구를 통해, 향후 염료감응형 태양전지의 온실 등 농업분야 적용 시 기초자료로 활용 할 수 있을 것으로 기대된다.