• Journal of the Korean Electrochemical Society
• /
• v.16 no.3
• /
• pp.184-189
• /
• 2013

$Ba_2SiO_4:Eu^{2+}$ ($B_2S:Eu^{2+}$) powders were prepared by firing the dry gel obtained by the sol-gel and the hybrid process (sol-gel and combustion), respectively, and their structure and luminescence were investigated. Tetraethyl orthosilicate (TEOS) was used as a Si source. The phase transition was observed with the TEOS content. With 1.2M TEOS, the powders prepared by the sol-gel process without prior calcination were composed of the $B_2S:Eu^{2+}$ single phase, whereas those by the sol-gel and the hybrid process with prior calcination consisted of the dominant $B_2S:Eu^{2+}$ and minor $BaSiO_3:Eu^{2+}$ ($BS:Eu^{2+}$) phases and their emission intensities were approximately two times higher than those without prior calcination. The hybrid process could reduce the process time innovatively compared to the sol-gel process, even though the former was a little inferior to the latter in the emission intensity of $B_2S:Eu^{2+}$. With 1.1M TEOS, the $B_2S:Eu^{2+}$ single phase was obtained by the hybrid process, and its green emission was observed at 505 nm originated from the $4f^65d^1{\rightarrow}4f^7$ transition of $Eu^{2+}$ ions.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.806-809
• /
• 2009

Epoxy functionalized organic-inorganic hybrid materials (hybrimers) were synthesized by sol-gel reaction for application in OLED barrier coating. By using the calcium degradation method, the oxygen transition rate (OTR) and water vapor transition rate (WVTR) measured so far is $10^{-2}cc/m^2$-day for oxygen and $10^{-1}g/m^2$-day for water molecules with single hybrimer coating film, respectively. Encapsulated OLED devices have life time of 14hrs of a single hybrimer barrier coating and 29hrs of hybrimer/inorganic double barrier coatings at $25^{\circ}C$ and 60% relative humidity.

• Journal of the Korean Ceramic Society
• /
• v.31 no.7
• /
• pp.804-812
• /
• 1994

Stable PZT coating sol was prepared using chelating agent, ethylacetoacetate(EAcAc) by sol-gel processing under ambient atmosphere. Through FT-IR spectrum analysis on solution of each reaction step, formation of metal complex was confirmed and prepared PZT sol was stable over several months. Through TG-DTA, XRD, FT-IR spetrum analysis of PZT gel powder, it was understood that the addition of EAcAc could reduce the transition temperature to ferroelectric phase, due to the increased homogeneity by matching the hydrolysis and condensation rates by chelation. Single perovskite phase was obtained by the heat-treatment at 54$0^{\circ}C$ for 30 min. The film was coated on ITO-coated glass substrate by dip coating method. After heat-treatment, PZT thin film had thickness in the range of 20~130 nm. The maximum dielectric constant of its thin film at room temperature and 1 kHz was 128.

• The Korean Journal of Ceramics
• /
• v.1 no.3
• /
• pp.152-154
• /
• 1995

A non-hydrolytic sol-gel process was developed to fabricate low-hydroxyl hard gels. The reaction of tert-butyl alcohol with silicon halides provided transparent low-hydroxyl hard gels. Some properties such as transparency, density, and refractive index was successfully doped into the hard gel matrices. The absorption spectrum of an erbium-doped methylsilsesquioxane was investigated to decide the pumping wavelength of an argon laser. The luminescence of the erbium-doped gel at 664 nm seems to be due to $4^F{9/2}\to 4^I_{15/2}$ transition.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.27 no.5
• /
• pp.523-523
• /
• 2003

The change of interactions of anionic surfactants, sodium dodecyl sulfate(SDS) and sodium tetradecyl sulfate(575) in the presence of electrolytes, to the chitosan-based polyelectrolyte(sol＇n and gel phase) were studied. The chitosan gel used in this study were crosslinked with epichlorohydrin(ECH). Binding isotherms were determined by potentiometric technique using a surfactant ion selective solid-state electrode and the results were represented by using the sequence generating function(SGF) method. The results of binding isotherm were shown comparatively high cooperativity. The addition of electrolytes in the chitosan/SDS system resulted in a shift of the binding to higher free surfactant concentration because of screen effect by the electrolytes. Degree of binding of chitosan gel was higher than that of chitosan sol＇n. And also a conformational phase transition of the chitosan gel in the presence of electrolytes has been investigated.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.27 no.5
• /
• pp.524-532
• /
• 2003

The change of interactions of anionic surfactants, sodium dodecyl sulfate(SDS) and sodium tetradecyl sulfate(575) in the presence of electrolytes, to the chitosan-based polyelectrolyte(sol＇n and gel phase) were studied. The chitosan gel used in this study were crosslinked with epichlorohydrin(ECH). Binding isotherms were determined by potentiometric technique using a surfactant ion selective solid-state electrode and the results were represented by using the sequence generating function(SGF) method. The results of binding isotherm were shown comparatively high cooperativity. The addition of electrolytes in the chitosan/SDS system resulted in a shift of the binding to higher free surfactant concentration because of screen effect by the electrolytes. Degree of binding of chitosan gel was higher than that of chitosan sol＇n. And also a conformational phase transition of the chitosan gel in the presence of electrolytes has been investigated.

• Korean Journal of Materials Research
• /
• v.24 no.11
• /
• pp.599-603
• /
• 2014

$NaLa_{1-x}(MoO_4)_2:Eu^{3+}/Yb^3$ phosphors with doping concentrations of $Eu^{3+}$ and $Yb^{3+}$ ($x= Eu^{3+}+Yb^{3+}$, $Eu^{3+}=0.05$, 0.1, 0.2 and $Yb^{3+}= 0.2$, 0.45) were successfully synthesized by the microwave-modified sol-gel method, and the upconversion and spectroscopic properties were investigated. Well-crystallized particles showed a fine and homogeneous morphology with particle sizes of $2-5{\mu}m$. Under excitation at 980 nm, $NaLa_{0.5}(MoO_4)_2:Eu_{0.05}Yb_{0.45}$ particles exhibited a strong 525-nm emission band and a weak 550-nm emission band in the green region, and a very weak 665-nm emission band in the red region. The strong 525-nm emission in the green region corresponds to the $^7F_1{\rightarrow}^5D_1$ transition and the weak 550-nm emission in the green region corresponds to the $^7F_0{\rightarrow}^5D_2$ transition, while the very weak emission 665-nm band in the red region corresponds to the $^5D_0{\rightarrow}^7F_3$ transition. The Raman spectra of the doped particles indicated the domination of strong peaks at higher frequencies of 762, 890, 1358 and $1430cm^{-1}$ and weak peaks at lower frequencies of 323, 388 and $450cm^{-1}$ induced by the disorder of the $[MoO4]^{2-}$ groups with the incorporation of the $Eu^{3+}$ and $Yb^{3+}$ elements into the crystal lattice or by a new phase formation.

• Biomaterials Research
• /
• v.22 no.4
• /
• pp.249-258
• /
• 2018

Background: Mucoadhesive polymers, which may increase the contact time between the polymer and the tissue, have been widely investigated for pharmaceutical formulations. In this study, we developed a new polysaccharide-based mucoadhesive polymer with thermogelling properties. Methods: Hexanoyl glycol chitosan (HGC), a new thermogelling polymer, was synthesized by the chemical modification of glycol chitosan using hexanoic anhydride. The HGC was further modified to include thiol groups to improve the mucoadhesive property of thermogelling HGC. The degree of thiolation of the thiolated HGCs (SH-HGCs) was controlled in the range of 5-10% by adjusting the feed molar ratio. The structure of the chemically modified polymers was characterized by $^1H$ NMR and ATR-FTIR. The sol-gel transition, mucoadhesiveness, and biocompatibility of the polymers were determined by a tube inverting method, rheological measurements, and in vitro cytotoxicity tests, respectively. Results: The aqueous solution (4 wt%) of HGC with approximately 33% substitution showed a sol-gel transition temperature of approximately $41^{\circ}C$. SH-HGCs demonstrated lower sol-gel transition temperatures ($34{\pm}1$ and $31{\pm}1^{\circ}C$) compared to that of HGC due to the introduction of thiol groups. Rheological studies of aqueous mixture solutions of SH-HGCs and mucin showed that SH-HGCs had stronger mucoadhesiveness than HGC due to the interaction between the thiol groups of SH-HGCs and mucin. Additionally, we confirmed that the thermogelling properties might improve the mucoadhesive force of polymers. Several in vitro cytotoxicity tests showed that SH-HGCs showed little toxicity at concentrations of 0.1-1.0 wt%, indicating good biocompatibility of the polymers. Conclusions: The resultant thiolated hexanoyl glycol chitosans may play a crucial role in mucoadhesive applications in biomedical areas.

• Food Science and Biotechnology
• /
• v.18 no.3
• /
• pp.618-623
• /
• 2009

Synergistic interactions between xanthan (X) and carob (C) were investigated by studying the linear viscoelastic behavior of X, C, and X/C mixtures at sol and gel states. At the solution state, storage modulus (G') dominates the linear viscoelastic properties of X/C mixtures. The gelation temperature (52 to $57^{\circ}C$) was weakly dependent on the xanthan fraction (${\phi}x$) in the mixture. The ${\phi}x$ also had a strong effect on G' until ${\phi}x=0.5$. The elastic active network concentration (EANC) of X/C gels was estimated from the pseudo-equilibrium modulus. The EANC for systems with ${\phi}x=0.25$, 0.5, 0.75, and 1 at 1% total concentration was 2.3, 4.4, 4.1, and 0.32 (${\times}10^{-3}\;mol/m^3$), respectively. The maximum synergistic effect was observed at about ${\phi}x=0.5$. The G' at the transition state of X/C mixed gel was proportional to ${\omega}^{3/2}$ at ${\omega}$>${\omega}_{tr}$ (the onset transition frequency) compared to the theoretical limit of ${\omega}^{1/2}$.

• Food Science of Animal Resources
• /
• v.32 no.5
• /
• pp.627-634
• /
• 2012

This study was carried out to investigate the physical and thermal properties of ${\kappa}$-carrageenan (${\kappa}$-car) gel added whey protein isolate (WPI) as a cryoprotectant. The concentration of ${\kappa}$-carrageenan was fixed at 0.2 wt%. The mean ice crystal size of the WPI/${\kappa}$-car was decreased according to increasing whey protein isolate concentration. The temperature of gel-sol (Tg-s) and sol-gel (Ts-g) transition of WPI/${\kappa}$-car maxtrix was represented in the order of 3.0, 0.2, 5.0 and 1.0 wt%. In addition, the transition temperature of gel-sol of WPI in sucrose solution were showed in order of 1.0, 5.0, 0.2 and 3.0 wt% depending on whey protein isolate concentration. The shape of ice crystal was divided largely into two types, round and rectangular form. 1.0 wt% WPI/${\kappa}$-car matrix at pH 7 and 9 showed minute and rectangular formation of ice crystals and whey protein isolate in sucrose solution at a concentration of 1.0 wt% WPI/${\kappa}$-car matrix at pH 3 and 5 showed relatively large size and round ice crystals. The ice recrystallization characteristics and cryprotective effect of ${\kappa}$-carrageenan changed through the addition of different concentrations of whey protein isolate. It seems that the conformational changes induced interactions between whey protein isolate and ${\kappa}$-carrageenan affected ice recrystallization.