• Journal of the Korean Geotechnical Society
• /
• v.21 no.10
• /
• pp.17-25
• /
• 2005

The bender element method is an experimental technique to determine very small strain ($<10^{-3}\%$), elastic shear modulus of a soil, $G_{max}$ by measuring the velocity of shear wave propagation through a sample. Bender elements have been applied as versatile transducers to measure small strain modulus of wet or dry soils in various laboratory apparatus. In this paper, bender element (BE), resonant column (RC) and torsional shear (TS) tests were performed on Toyoura sand at various testing conditions using the modified Stokoe type RC/TS testing equipment capable of performing BE test. Based on the results, applicabilities of the testing method using bender element were evaluated by comparing the values of $G_{max}$ obtained from RC/TS and BE testing methods. For more dependable evaluation, the loading frequency of each testing method was considered for the results obtained for samples in saturated condition by adapting Biot's theory.

• 한국도로학회:학술대회논문집
• /
• 2006.03a
• /
• pp.85-94
• /
• 2006

• Journal of Soil and Groundwater Environment
• /
• v.21 no.6
• /
• pp.169-178
• /
• 2016

The Standards, Measurement and Testing Programme (SM&T-formerly BCR) extraction procedure was applied to fractionate Cr, Cu, Ni, Pb and Zn in 23 top soil samples into: (i) exchangeable phase; (ii) reducible phase; (iii) oxidisable(sulfides and organics bound) phase; and (iv) residual phase. Fractions of Cr and Ni were in the order of residual > oxidisable > reducible > exchangeable phase. The oxidisable phase was identified as dominant for Cu and Pb. Zn had the highest ratio of exchangeable phase in comparision to the other metals. The bioavailability and mobility were assessed to be the greatest for Zn, followed by a decreasing order of Pb, Cu, Ni and Cr. All metal average concentrations in topsoil samples was higher in industrial sites than in agricultural sites. Our results revealed higher concentrations in topsoil samples (0~15 cm) than in sub soils (15~30 cm, 30~60 cm) for most metals at six sites (No. 5, 6, 17, 19, 20, 23). The fractions of exchangeable, reducible ad oxidisable phases showed relatively high correlation with soil pH, Fe/Mn oxide concentrations and organic matter contents, respectively.

• Korean Journal of Soil Science and Fertilizer
• /
• v.49 no.6
• /
• pp.699-704
• /
• 2016

An estimation of optimal requirement of additional N by cropping pattern and growth stage is very important for greenhouse watermelon. The objectives of this study were to estimate an amount of optimal additional N based on growth, N uptake and yield of watermelon. In order to achieve these goals, we performed the study at farmer's greenhouse with a fertigation system and watermelon was cultivated three times (spring, summer and autumn) in 2015. The levels of additional N were set up with x0.5, x0.75, x1.0 and x1.5 of the $NO_3$-N-based soil-testing N supply for watermelon cultivation. The trends of growth and N uptake of watermelon markedly differed from cropping pattern; spring (sigmoid), summer and autumn (linear). The yield of watermelon was the highest at summer season and followed by autumn and spring. Also, the x1.5N showed a significantly higher yield compared to other N treatments. On the basis of growth, N uptake and yield of watermelon, we estimated an optimal level of additional N by cropping pattern and growth stage as follows; 1) spring (transplanting ~ 6 WAT : 6 ~ 14 WAT : 14 ~ harvest = 5 : 90 : 5%), summer (transplanting ~ 4 WAT : 4 ~ 8 WAT : 8 ~ harvest = 25 : 50 : 25%) and autumn (transplanting ~ 4 WAT : 4 ~ harvesting : 50 : 50%). In conclusion, nutrient management, especially N, based on cropping pattern and growth stage was effective for favorable growth and yield of watermelon.

• Journal of Soil and Groundwater Environment
• /
• v.20 no.4
• /
• pp.51-65
• /
• 2015

Indoor inhalation of vapors intruded into buildings is an important exposure pathway in volatile organic compoundscontaminated sites. Site-specifically measured indoor air concentration is preferentially used for risk assessment. However, when indoor air concentration of VOC is not measured, the indoor air concentration needs to be estimated from soil concentration or measured soil gas concentration of the VOC. Some risk assessment guidance (e.g., Korea Ministry of Environment (KMOE) and American Society for Testing and Materials (ASTM) International guidance) estimate the indoor air concentration from soil concentration while other guidances (e.g., United States Environmental Protection Agency (USEPA) and Dutch National Institute for Public Health (RIVM)) estimate it from measured soil gas concentration. This study derived indoor inhalation risks of intruded benzene in two benzene-contaminated residential areas with four different risk assessment guidances (i.e., KMOE, USEPA, ASTM, and Dutch RIVM) and compared the derived risks. The risk assessment results revealed that indoor air estimation approach from soil concentration could either underestimate (when the contaminant is not detected in soil) or overestimate (when the contaminant is detected in soil even at negligible concentration) the indoor air inhalation risk. Hence, this paper recommends to estimate indoor air concentration from soil gas concentration, rather than soil concentration. Discussions about the various indoor air concentration estimation approaches are provided.

• Korean Journal of Environmental Agriculture
• /
• v.33 no.1
• /
• pp.1-8
• /
• 2014

BACKGROUND: Recent studies using many amendments for heavy metal stabilization in soil were conducted in order to find out new materials. But, the studies accounting for the use of appropriate amendments considering soil pH remain incomplete. The aim of this study was to investigate the effects of initial soil pH on the efficiency of various amendments. METHODS AND RESULTS: Acid soil and alkali soil contaminated with heavy metals were collected from the agricultural soils affected by the abandoned mine sites nearby. Three different types of amendments were selected with hypothesis being different in stabilization mechanisms; organic matter, lime stone and iron, and added with different combination. For determining the changes in the extractable heavy metals, water soluble, Mehlich-3, Toxicity Characteristic Leaching Procedure, Simple Bioavailability Extraction Test method were applied as chemical assessments for metal stabilization. For biological assessments, soil respiration and root elongation of bok choy (Brassica campestris ssp. Chinensis Jusl.) were determined. CONCLUSION: It was revealed that lime stone reduced heavy metal mobility in acid soil by increasing soil pH and iron was good at stabilizing heavy metals by supplying adsorption sites in alkali soil. Organic matter was a good source in terms of supplying nutrients, but it was concerning when accounting for increasing metal availability.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1999.03a
• /
• pp.193-200
• /
• 1999

An experimental study is described in which a 305-mm-diameter instrumented drilled shaft was installed in a moderately expansive clay soil during the dry season and monitored over a period of about 18 months. The purpose of the study was In investigate the effects of seasonal moisture changes in the soil on the shear stresses imposed on the sides of the drilled shaft and movements of the shaft head. The soil in the vicinity of the test shaft was instrumented to measure suction and ground surface movement and the relation between suction, total stress and shear strength of the soil at the test site was determined through laboratory triaxial compression testing. Daily rainfall and temperatures were also monitored at the test site, the National Geotechnical Experimentation Site at the University of Houston, where control on surface grading and vegetation existed. Over the course of the study induced unit side shear values of up to 54 kPa were measured in the test shaft. A simple computational model was developed that related observed suction changes to unit side shear induced by the expansion of the soil through the use of the laboratory suction-total stress-shear strength relation.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2000.03b
• /
• pp.481-488
• /
• 2000

The mechanism of soil-geotextile system has been studied among researchers since the application of geotextile as a replacement of graded granular filters is rapidly growing. The interaction of soils with geotextile is rather complicated so that its design criteria are mostly based on empiricism. Hence, it is essential to study the characteristics of fine particles transport into geotextile induced by the groundwater flow In this study, the permeability reduction in the soil-filter system due to clogging phenomenon is evaluated. An extensive research program is performed using two typical weathered residual soils which are sampled at Shinnae-dong and Poi-dong area in Seoul. Two separate simulation tests with weathered residual soil are peformed: the one is the filtration test(cross-plane flow test): and the other is the drainage test(in-plane flow test). Needle punched non-woven geotextiles are selected since it is often used as a drainage material in the field. The compatibility of the soil-filter system is investigated with emphasis on the clogging phenomenon. The hydraulic behaviour of the soil-filter system is evaluated by changing several testing conditions.

• Journal of Soil and Groundwater Environment
• /
• v.19 no.5
• /
• pp.18-25
• /
• 2014

Traditional investigation procedures of soil and groundwater contamination are followed by soil gas sampling, soil sampling, groundwater sampling, establishment of monitoring wells, and groundwater monitoring. It often takes several weeks to obtain the analysis reports, and sometimes, it needs supplemental sampling and analysis to delineate the polluted area. Laser induced fluorescence (LIF) system is designed for the detection of free-phase petroleum pollutants, and it is suitable for on-site real-time site investigation when coupling with a direct push testing tool. Petroleum products always contain polycyclic aromatic hydrocarbon (PAH) compounds possessing fluorescence characteristics that make them detectable through LIF detection. In this study, LIF spectroscopy of 5 major fuel products was conducted to establish the databank of LIF fluorescence characteristic spectra, including gasoline, diesel, jet fuel, marine fuel and low-sulfur fuel. Multivariate statistical tools were also applied to distinguish LIF fluorescence characteristic spectra among the mixtures of selected fuel products. This study successfully demonstrated the feasibility of identifying fuel species based on LIF characteristic fluorescence spectra, also LIF seemed to be uncovered its powerful ability of tracing underground petroleum leakages.

• Journal of the Korean Ceramic Society
• /
• v.51 no.4
• /
• pp.300-306
• /
• 2014

To recycle coal bottom ash(denoted here as CBA) generated from thermal power plants as a functional construction material, artificial soil(denoted as AS) containing CBA with dredged soil(denoted as DS) at a ratio(wt%) of 70 : 30 was manufactured by means of material engineering with sintering in a rotary kiln at $1125^{\circ}C$ using a green body formed via extrusion processing. The properties of the soil mechanics of the AS and the as-received CBA were analyzed and compared. Compaction testing results determined an optimum moisture content of the AS and CBA at 18%. During these tests, the maximum dry unit weights of the materials were similar, at 1.57 and 1.58 $t/m^3$, respectively. The compressive strength levels of the AS and CBA concrete specimens were 5.1 and 5.4 $t/m^3$, respectively, both of which increased after materials engineering processing. In a consolidation test, the compression index of the AS and CBA was found to be $0.114{\pm}0.001$ in both cases. The values were similar regardless of the materials engineering processes, but during the consolidation of AS, its coefficient was higher than that of the CBA materials.