• Journal of the Korean Geotechnical Society
• /
• v.28 no.6
• /
• pp.19-29
• /
• 2012

Pack micropiles were recently developed to improve pile capacity of general micropiles. Pack micropiles were made by warping thread bar or steel pipe of general micropile by geotexlile pack and grouting inside the pack with pressure. According to the pressure, the boring hole could be enlarged. A series of pile uplift tests were performed on three micropiles. Two out of the three piles were the pack micropiles and the other was the general micropile, in which a thread bar was used in the boring hole. According to the pressure applied to the pack micropiles, the diameter of boring hole was enlarged from 152 mm to 220 mm. Unit skin friction mobilized on side surfaces of micropiles increased with displacement of pile head and reached on a constant value, which represents that the relative displacement between piles (or thread bar) and soils was reached on critical state. And the uplift resistance of pack micropile was higher than that of general micropile. Two reasons can be considered: One is that the frictional surface increases due to enlarging diameter of boring holes and the other is that the unit skin friction could increase due to compressing effect of surrounding soils by soil displacement as much as the enlarging volume of boring hole. The compression effect appeared at deeper layer rather than surface layer. The unit skin friction mobilized on micropiles with small diameter was higher than the ones on large bored piles.

• Journal of the Korean Geotechnical Society
• /
• v.29 no.5
• /
• pp.39-52
• /
• 2013

The shear stress characteristics of landslide materials can be affected by various factors. We examined the shear stress characteristics of two different soils using ring-shear apparatus, in which saturation-consolidation-shearing speed can be easily controlled. This paper presents (i) shear stress-time characteristics, (ii) shear stress depending on normal stress and shear speed and (iii) shear stress as a function of shearing speed. Materials used in this paper were the Nakdong River sand and muds taken from Jinhae coastal area in Korea. Samples were prepared in three types: Sand (upper)-Sand (lower), Clay (upper)-Clay (lower) and Sand (upper)-Clay (lower). The upper and lower indicate the samples placed in upper and lower ring shear boxes, respectively. For given normal stresses (50 and 100 kPa) and shearing speed (0.1 mm/sec), we performed ring shear tests. Then the failure lines were determined in the second test. Last, we determined the shear stress characteristics depending on different shearing speeds, such as 0.01, 0.1, 1, 10, 100 mm/sec. As a result, we found that shear stress characteristics are strongly dependent on above three factors. The shear stress of Sand (upper)-Clay (lower) is smaller than that of Sand (upper)-Sand (lower), but slightly larger than that of Clay (upper)-Clay (lower). The shear stress is also characterized by grain crushing and wetting process at slip surface.

• Journal of Navigation and Port Research
• /
• v.33 no.5
• /
• pp.315-321
• /
• 2009

The Very Large Marine Structure has been widely used new method of ocean space instead of method for reclamation Therefore, VLFS is proposed to coincide on such request. It can be established regardless of nature of soil and height of water, and stream of flow exists under the floating structure, there is seldom effect in natural environment. Fuertherrnore, it can do easily to do assembly and taking to pieces due to expansion or removal. Based on the regulation by class, VLFS have to possess more than enough structural strength against severe wave loading induced by green sea condition Therefore, There are performed structural simulation as well as experimental test about expected loading scenario in order to examine the safety of structure. Up to now, various examinations based on the strength limit value of the main structural material have been done based on the elasticity response analysis. However, there is little finding about the collapse behavior and the safety when the load that exceeds the collapse of the material acts. In the present study, we investigated the collapse behavior based on the ultimate limit state calculated by FE-analysis.

• Korean Journal of Agricultural Science
• /
• v.14 no.1
• /
• pp.16-25
• /
• 1987

Colletotrichum acutatum, C. coccodes, C. dematium and C. gloeosporioides were detected in seed samples of red pepper (Capsicum annuum). C. dematium and C. gloeosporioides were the predominant species, maximum seed infection of the species in some samples were 84% and 28%, respectively. C. acutatum and C. coccodes were recorded only in low percentages of 1-2. The blotter method proved more suitable for detecting Colletotricum spp. than the deep freezing blotter or agar plate methods. Plating of seed components showed that C. dematium and C. gloeosporioides were recovered more frequently from seed coat, and decreasing amounts of infection were observed in the endosperm and cotyledon. Seed-borne C. dematium and C. gloeosporioides caused seed rot, damping-off, seedling blight and brown discoloration of cotyledon and hypocotyl when infected seeds were sown in agar of test tube or in soil. Inoculation experiments showed that C. acutatum was pathogenic to red fruit of red pepper and C. coccodes was highly pathogenic to red fruit and weakly pathogenic to leaf of the plant. C. dematium was highly pathogenic to leaf and green fruit and C. gloeosporioides was pathogenic to not only leaf but also green and red fruits. Host range of the four seed-borne species of Colletotrichum was also investigated.

• Korean journal of applied entomology
• /
• v.45 no.2 s.143
• /
• pp.211-216
• /
• 2006

Total of 36 sweet potato field soils were sampled to survey the occurrence of the root-knot nematodes (RKN). The 61% of sweet potato fields in Haenam, 40% in Iksan and 31% in Yeju were infested with RKN, respectively. Average population density of RKN was 324 juveniles per 300 g soil. The resistance screening of sweet potato cultivars against RKN was carried out by using clay pots in a greenhouse. Average temperature under ground 10 cm in pot was 21.5$^{\circ}C$ during the test. There was no difference in number of egg sacs among different inoculation methods, however the egg-inoculation method was easy for treatlnent and had stable far results. The multiplication ratio of Melioidogyne incognita differed from 6.3 times (Jeungmi) to 63.2 times (Yulmi) by sweet potato cultivas. There were no cultivars showing resistance to M. incognita, but Jinmi, Jeungmi and Borami had resistance to if arenaria, M. hapla and M. javanica.

• Korean journal of applied entomology
• /
• v.54 no.4
• /
• pp.393-400
• /
• 2015

An insect parasitic mite was found on a larva from Japanese apricot seed. The mite was identified as Pyemotes moseri Yu et Liang (Acarina: Pyemotidae) new to Korea. The host larva was identified as Eurytoma maslovskii using mitochondrial DNA sequencing analysis. We conducted preliminary study on its reproduction and parasitization capacity in laboratory condition. A mated female mite reared on Eurytoma maslovskii larva. We counted and sexed newborn progenies and then eliminated them during periodical observations. To test parasitization capacity, a PCR tube containing mass reared P. moseri and Japanese apricot seeds (assumed bear larva of E. maslovskii) placed in a stainless bath filled with potting soil. One month later, we surveyed the seeds whether the E. maslovskii larva parasitized by mite or not. We repeated this experiment three times with five replications each. Average life span (days from parasitization to the end of reproduction) of gravid females was 24.4 days (n=8). A gravid female reproduced 104.0 female progenies (n=8). Although there were more than seven Japanese apricot seeds per bath containing larva or pupa, we found parasitization only in two seeds.

• Journal of the Korean Society for Railway
• /
• v.17 no.4
• /
• pp.251-259
• /
• 2014

The transition zone between an earthwork and a bridge effect to the vehicle's running stability because support stiffness of the roadbed is suddenly changed. The design criteria for the transition structure on ballast track were not particular in the past. However with the introduction of concrete track is introduced, it requires there is a higher performance level required because of maintenance and running stability. In this present paper, a transition structure reinforced with geosynthetics is suggested to improve the performance of existing bridge-earthwork transition structures. The suggested transition structure, in which there is reinforcing of the approach block using high-tension geosynthetics, has a structure similar to that of earth reinforced abutments. The utilized backfill materials are cement treated soil and gravel. These materials are used to reduce water intrusion into the approach block and to increase the recycling of surplus earth materials. An experiment was performed under the same conditions in order to allow a comparison of this new structure with the existing transition structure. Evaluation items are elastic displacement, cumulative settlement, and earth pressure. As for the results of the real-scale accelerated testing, the suggested transition structure has excellent performance for the reduction of earth pressure and settlement. Above all, it has high resistance the variation of the water content.

• Korean journal of applied entomology
• /
• v.26 no.2 s.71
• /
• pp.99-106
• /
• 1987

Three post-harvest fields each in four rice growing areas, Iri, Naju, Jinju and Taegu were randomly selected and surveyed during December 1986 to examine sclerotial density of Rhizoctonia solani overwintering in the field. Surface soil of $0.09m^2$ area was sampled in each field with three replications and sieved to collect sclerotia. Germiability and pathogenicity of collected sclerotia were examined in the laboratory. Number of sclerotia $({\times}10^6)/ha$ in Iri, Naju, Jinju, and Taegu was estimated from the sample as 2.7, 1.2, 0.7 and 0.6, respectively. Based on sample variance with simple random sampling in each area, number of sampling required for estimating average sclerotial density with the precision of 10% apart from a chance of 1 in 20 was calculated to 41, 132, 232, and 395 for Iri, Naju, Jinju and Taegu, respectively. Percentage of germination of sampled sclerotia on potato sucrose agar (PSA) ranged from 42 to 78% depending on the area, and averaged 60%. About 49% of the germinated sclerotia were pathogenic to a rice cultivar Jinheung that was used to test pathogenicity of the sclerotia. Proportion of viable sclerotia that have both germiability and pathogenicity was thus estimated to 0.29 of total sclerotia collected. R. solani cultures obtained from the sclerotia could be distinguished into three groups based on colony morphology on PSA. Size and number of sclerotia formed on PSA differed between group but were not associated with pathogenicity to Jinheung.

• Korean journal of applied entomology
• /
• v.13 no.4 s.21
• /
• pp.209-216
• /
• 1974

Life history and control methods of Aphanostigma iakusuiense Kishida were studied during April to November, 1974, in the Naju pear orchard area, Cholla Namdo. The results are summarized as follows: 1. More than $60\%$ of wintering eggs were found at the height of 1.5 to 2.0m from the soil surface, with approximately $10\%$ at 0.5 to 1.5m and 1.5 to 2.5m respectively. 2. There was little difference in the size of egg masses and hatching ratio $(12.7-13.7\%)$ between the varieties of host trees, Mansamkil and Kooksoo. 3. Hatching was not observed until April 6, but hatches of $12.8\%$ on April 13 and $90.6\%$ on May 4 were found. 4. During the hatching season in early spring, 8 chemicals were applied to test effectiveness of control. C8514, Metasystox, Acar 338, and Parathion were more effective than either Sevin or Malix for control of this insect. 5. Highest populations of pear phylloxera ocurred from August 20 to September 20 at which time levels of eggs and larvae were simillar in abundance. 6. In tests for control of this insect after in paper bags, DDVP, Loxon, C8514, Sevin, and Binapacryl were more effective than either EPN or Otran. 7. Predacious mite, Protolaelape pygmaeus Miller, and several species of lady beetles (Coccinellidae) preying on this insect as natural enemies were collected. The predation ratio of mites varied according to region: that is 0.77 to $18.6\%$ in Bia Orchard; $7.88-48.7\%$ in Noan Orchard and almost none in Youngsanoo Orchard. 8. The varietal difference in fruit damage by this insect was in the order of Choseng Chuck, Kooksoo, followed by Sin Ko, Mansamkil, Keumchon Choo, and Changsimrang.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.15 no.3
• /
• pp.52-65
• /
• 2012

The net biomass accumulation (or net primary production, NPP) and gross primary production (GPP) have closely related with carbon accumulations(or carbon exchange) in vegetation. There are many approaches to estimate biomass using remote sensing techniques. The vegetation indices (VIs) can be a methodology to estimate biomass which assumes total chlorophyll contents. Various VIs were characterized with difference development conditions as vegetation species, input datasets. The hyperspectral data have also different spatial/spectral resolutions for aerial surveying. Additionally they need particular spectral bands selection difficulty to calculate the VIs. The objective of this study is to evaluate the correlations with airborne hyperspectral data (compact airborne spectrographic imager, CASI) and spectral unmixing model (or spectral mixture analysis, SMA) to characterize vegetation indices in forest area. The spectral mixture analysis was used to model the spectral purity of each pixel as an endmember. The endmembers are the fraction components derived from hyperspectral data through the SMA. In this study, we choose three endmembers represented vegetation pixels in the hyperspectral data. These endmembers were compared with 9 VIs by the Pearson's correlation coefficient. The results show MTVI1 and TVI have same correlation coefficient with 0.877. The MCARI, especially has very high relationship with vegetation endmembers as 0.9061 at less vegetation and soil distributed site. The MTVI1 and TVI have high correlations with the vegetation endmembers as 0.757 in whole test sites.