• Journal of Korean Society of Forest Science
• /
• v.94 no.3 s.160
• /
• pp.161-167
• /
• 2005

Above and belowground biomass for Phyllostachys pubescens was determined in Jinju, Gyeongsangnam-do. Regression analyses of dry weights of culms, foliages, and twigs versus diameter at breast height were used to calculate regression equations of the form of log Y = a + blogX. Total aboveground biomass for Phyllostachys pubescens was 69.7 ton/ha and rhizomes and roots biomass were 13.7 ton/ha and 7.5 ton/ha, respectively. Culms account for about 60% of total aboveground biomass. The aboveground biomass of each component was decreased in the order of culms>foliages>twigs. As diameter at breast height grew thicker, the proportion of culms to total aboveground biomass increased. The proportion of dry weight of culms to green weight gradually increased with height in a bamboo tree and ages. Nutrients (kg/ha) of litter layer were distributed as follows: N(45.1), Ca(17.3), K(6.1), Mg(3.6), P(3.5) and Na(0.7). Nitrogen and K were given much weight in total nutrients of rhizomes and roots. These results will be useful in measuring carbon stock and drawing up management plan to increase it for Phyllostachys pubescens stand.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.206-206
• /
• 2017

Sorghum is a crop with a various plant height depending on the planting density. If the height exceeds 1.8m, which is the harvestable height of the combine, loss is caused by clogging of the installation, entrance of the threshing section and the threshing section. The purpose of this study is to set the planting distance and number of plants per hill suitable for combine harvesting as the plant length does not exceed 1.8m. The experimental variety was Nampungchal. The experiment design was a split-plot design with three replications. The treatments were as follow: Main-plot were 1 and 2 plants as number of plants per hill and sub-plots were $60{\times}20cm$ (practice), $70{\times}15$, 20, 25, 30 cm as planting distance. The amount of nitrogen, phosphate and potassium fertilization were 100, 70, $80kg\;ha^{-1}$. Data were collected: (1) grain yield: weight of grain in $kg\;ha^{-1}$, (2) 1000 grain weight: average weight of 1000 grain, (3) plant height: distance from soil to top of panicle, (4) ear length: distance from top of stem to top of ear in cm, (5) stem diameter: diameter of second internode, (6) tiller number per hill. Analyses of variance were performed using R version 3.3.1(https://www. r- project. org). The Duncan's multiple range test(DMR) was used to separate treatment means at P < 0.05. As number of plants per hill increased, plant height and yield increased and tiller number decreased. As planting distance increased, plant height and yield decreased and tiller number increased. At 1 plant per hill, the plant height did not exceed 1.8m at all planting distance. At 2 plants per hill, the plant height did not exceed 1.8m from the planting distance of $70{\times}25cm$. At 1 plant per hill, the tiller number increased to 0.23, 0.27, 0.60 and 0.70 as the planting distance increased to $70{\times}15$, 20, 25 and 30 cm, respectively. At 2 plants per hill, the tiller number increased to 0.03, 0.03, 0.14 and 0.40 as the planting distance increased to $70{\times}15$, 20, 25 and 30 cm, respectively. At 1 plant per hill, the yield decreased to 6030, 4280, 3400 and $3230kg\;ha^{-1}$ as the planting distance increased. At 2 plant per hill, the yield decreased to 7850, 5770, 5720 and $4960kg\;ha^{-1}$ as the planting distance increased. We recommend that the optimum number of plants per hill and planting distance is 2 and $70{\times}25cm$ suitable for combine harvesting.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.207-207
• /
• 2017

The proso millet is vulnerable to lodging due to high plant height and shallow root. A lodging results in a hard mechanical harvesting and yield loss. One of solutions on this problem is inhibition of internode elongation. The objective of this study was to set up use time and dose of prohexadium-calcium, is growth inhibitor. The experimental variety was Ibaekchal. The experiment design was a split-plot design with three replications. The treatments were as follow: Main-plots were 25 and 35 day after sowing(DAS) as use time and sub-plots were 0%, 50%, 100%(diluted solution of 1000 times, $1000{\ell}\;ha^{-1}$), 150% as dose. The amount of nitrogen, phosphate and potassium fertilization were 90, 70, $80kg\;ha^{-1}$, respectively. The size of high ridge and plant spacing were $90{\times}30cm$ and $60{\times}15cm$, respectively. Proso millet was sown on June 9, 2016 by hands and was adjusted at 2 plant per hill. The growth survey of vegetative growth stage was conducted at 1 day before treatment and with one week interval after treatment. Data were collected: (1) grain yield: weight of grain in $kg\;ha^{-1}$, (2) 1000 grain weight: average weight of 1000 grain, (3) plant height: distance from soil to top of panicle or leaf in cm, (4) ear length: distance from top of stem to top of ear in cm, (5) stem diameter: diameter of second internode (6) degree of lodging: percentage of lodging area, etc. Analyses of variance were performed using R version 3.3.1(https://www. r- project. org). The Duncan's multiple range test(DMR) was used to separate treatment means at P < 0.05. There was a significant difference in plant height and number of stem among the use time and dose of prohexadium-calcium during vegetative growth stage. At 25 DAS, the difference with no treatment increased until 25 day after treatment and decreased since then. The difference in number of stem increased until 18 day and decreased since 25 day. At 35 DAS, the difference with no treatment in plant height and number of stem increased until 22 day after treatment and decreased since then. We assumed that the effect of prohexadium-calcium was inhibition of internode elongation and promotion of tillering, continued untel 25day after treatment. At 25 DAS, the degree of lodging deceased to 100%, 30%, 10% and 0% as dose increased. At 35 DAS, the degree of lodging decreased to 100%, 20%, 0% and 0% as dose increased. At 25 DAS, the yield was 2910, 2710, 3190, $2310kg\;ha^{-1}$ among dose. At 35 DAS, the yield was 2750, 2630, 2220, $2050kg\;ha^{-1}$. We recommend that the optimum use time and dose of prohexadium-calcium for proso millet is 1000 times diluted solution of $1000{\ell}$ per ha at 25 day after sowing.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.27 no.4
• /
• pp.61-70
• /
• 2019

This study aimed to investigate the physicochemical characteristics of fish meal, bone meal, and sesame oil cake, which are readily available by-products from agriculture and fisheries, during the process of liquid fertilizer fermentation, and to examine the effects of liquid fertilizer application on seed germination and growth of tomatoes. During processing the fermentation for liquid fertilizers by using fish meal, bone meal, and sesame oil cake liquid fertilizers, the pH of the fertilizer increased in the order of bone meal > fish meal > sesame oil cake, and the concentration increased rapidly up to 30 days in all types of liquid fertilizer. The nitrogen content of the liquid fertilizers increased as fermentation progressed in the order of fish meal > bone meal > sesame oil cake. The phosphorus content increased as fermentation progressed and the highest was 1.0 % in the liquid fertilizer of sesame oil cake. The germination rate and its index of radish seeds were compared for different dilutions of each of the liquid fertilizers. Excluding the 10-fold dilution of the fish meal and oil cake liquid fertilizer, all the treatment groups showed a germination rate ≥ 95 % and the germination index tended to increase with dilution rate of liquid fertilizers. For responses of tomato growth, there were no significant differences among the liquid fertilizer treatment groups; however, the organic content, microbial density, and microbial biomass C in the soil were higher than chemical fertilizer treatment. These results demonstrated that there were differences in the characteristics of liquid fertilizers depending on the materials used, and that liquid fertilizer can be used for nutrition management for the organic crop cultivation.

• Journal of Korea Water Resources Association
• /
• v.48 no.1
• /
• pp.9-21
• /
• 2015

This study examined pollution level of sediment in Sookchun lake, and studied dredging validity by examining phosphorous release characteristics on surface polluted soil. Total phosphorous, the principal cause of algal blooms, exceeded dredging assessment standards regarding Daechung lake (1.5 mg/g) at all points. Also at all points, total nitrogen exceeded the dredging assessment standard regarding Paldang Lake (1.1 mg/g), but fell short of the standard regarding Daechung lake (3.0 mg/g). Dredging zone was suggested in this study is Chuso water body (WS-6~WS-12) in Sookchun lake. In relation to sediment pollution levels measured at different depths, LOI tended to decrease as it became deeper. The concentrations of T-N varied depending upon the depth as well as points, but no regular pattern was observed. The depth and site did not significantly influence T-P. From the results of phosphorous release tests, it was shown that total phosphorous release flux was calculated to be $7.2{\sim}15.4mg/m^2/d$ for anaerobic condition, $0.5{\sim}2.0mg/m^2/d$ for aerobic condition and $2.0{\sim}4.1mg/m^2/d$ for facultative condition. Release flux and T-P concentration of surface sediments had positive correlation ($R^2$ 0.7871). And The corelation between release flux and DO condition in reactor had strong negative correlation ($R^2$ 0.8824).

• The Korean Journal of Mycology
• /
• v.24 no.4 s.79
• /
• pp.310-321
• /
• 1996

Five strains AF027, AF069, AF2001, AF2011 and SD02 of Pseudomonas cepacia were isolated from soil, and the antifungal cyclic lipopeptides(CLP) i.e, CLP027A, CLP069A, Cepacidine A, CLP2011A and CLP02A were produced from each strains, respectively. Nitrogen and carbon sources in media were proved to be important factors for the production of CLP and among them, polypeptone-S, glucose and fructose were the most effective. It appeared that compounds CLP027A and CLP069A were identical with Cepacidine A and Xylocandine A, respectively. contain aspartic acid as amino acid component, are differentiated from Xylocandine A containing asparagine. Although molecular weight, amino acid composition and UV spectrum of CLP2011A and CLP02A are same with those of Cepacidine A, it is postulated that these compounds are not identical with Cepacidine A when the antifungal spectra and antifungal activity were compared to those of Cepacidine A.

• Journal of Korean Society of Forest Science
• /
• v.83 no.2
• /
• pp.229-238
• /
• 1994

Issues of declining growth and vigor in forests are major concerns in many areas around the world, especially in response to predictions in the 1980s of widespread forest declines. This paper summarizes the current state of knowledge for forests in North America, Europe, and East Asia. Forest declines near point-sources of pollution(such as metal smelters) have been well recognized for a century, but evidence of widespread impacts away from point-sources remains relatively uncommon. In North America, significant forest decline has resulted from high concentrations of ozone near Los Angeles, California, and around Mexico City. Some high-elevation forests of red spruce in the eastern U.S. have declined in the past 20 years ; evidence indicates a role of low-pH fog in reducing they cold-tolerance of spruce. In Europe. most attention has focused on Norway spruce stands that developed yellow foliage, needle loss, and in some cases mortality. This syndrome appears to be related generally to an inadequate supply of magnesium, perhaps coupled with a very high supply of nitrogen. Despite localized areas that show declining trees, overall stand growth and standing biomass in Europe increased from. 1970 to 1990. Much less information is available for East Asia. Many industrialized regions in China have a pH of rain <4.5, and some connections between pollution and forest decline have been suggested. Pollution impacts on forests near cities in Korea include needle chlorosis, reduced needle retention, and declining species diversity. Overall, temperate forests show no widespread declines, and no evidence of substantial effects of pollutants on forest growth or vigor. Small areas showing declining forests may indeed demonstrate pollution impacts, and may provide cause for concerns about future impacts on larger areas.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.14
• /
• pp.97-109
• /
• 1973

1. The relatively lower prehardening temperature was more effective on increase of the hardiness of the intermediately hardy varieties than the higher one but either the extremely hardy or nonhardy varieties did not respond to the temperature as much as the intermediate types. 2. Five degree Centigrade was generally more favorable than $2^{\circ}C$ on hardening of the plants, especially when frozen at higher temperature for shorter duration. 3. It appears that photoperiod during prehardening and hardening did not play so important role as temperature on the hardiness. 4. The higher the soil moisture content, the higher the frost injury occurred. 5. Application of nitrogen increased markedly the hardiness and % DM of the plants. Percentage of dry matter of young seedlings might be used as an easy and rough criterion for evaluating hardiness since there was a highly significant regression of varietal frost injury on the %DM. 6. Four days appeared to be enough for hardening of plants although the plants increased gradually the hardiness as duration of hardening extended. Dehardening of the plants at relativity higher temperature took place rapidly within one to four days. 7. Under this controlled environment, freezing at about $-8^{\circ}C$ for 24 hours seemed the best for the purpose of evaluating the hardiness to low temperature. 8. It is believed that assessment of frost injury should be done at least one week after freezing. Some varieties showed strong ability to recover from the damage as recovery period was extended. 9. As a whole, Cd 80 and 83 were the most hardy and followed by Cappelle and Maris Otter. Four. winter oats varieties and Jufy I belonged to the intermediate type while the other three spring varieties were nonhardy at all. Peniarth was comparable with Maris Otter in hardiness. S 147 appeared the least hardy among the winter oats varieties. 10. It is evident that water-soluble carbohydrate content is associated with the hardiness to some extent but not primary factor involved in hardiness.

• Korean Journal of Environmental Agriculture
• /
• v.35 no.4
• /
• pp.247-255
• /
• 2016

BACKGROUND: Acrylamide (CAS No. 79-06-1) is known to be a carcinogenic compound, and is classified as a Group 2A compound by the International Agency for Research on Cancer (IARC, 1994). Acrylamide can be generated during the browning process via the non-enzymatic Maillard reaction of carbohydrates such as reducing sugars and of amino acids such as asparagine, both of which occur at a temperature above $120^{\circ}C$. Potato tubers contain reducing sugars, and thus, this will affect the safety of processed potato products such as potato chips and French fries. In order to reduce the level of acrylamide in potato processed products, it is therefore necessary to understand factors that affect the reducing sugar content of potatoes, such as environmental factors and potato storage conditions, as well as understanding factors affecting acrylamide formation during potato processing itself. METHODS AND RESULTS: Potatoes were cultivated in eight regions of Korea; For each of these different environments, soil physico-chemical characteristics such as pH, electrical conductivity, total nitrogen, available phosphate, and exchangeable cation content were measured and correlations with potato reducing sugar content and potato chip acrylamide levels were examined. The reducing sugar content in potato during storage for three months was determined and acrylamide level in potato chip was analyzed after processing. The storage temperature levels were $4^{\circ}C$, $8^{\circ}C$, or $10^{\circ}C$, respectively. The acrylamide content of chips prepared from potatoes stored at $10^{\circ}C$ or $20^{\circ}C$ for one month was analyzed and the different frying times were 2, 3, 5, and 7 min. CONCLUSION: This study showed that monitoring and controlling the phosphate content within a potato field should be sufficient to avoid producing brown or black potato chips. For potatoes stored at low temperatures, a reconditioning period ($20^{\circ}C$ for 20 days) is required in order to reduce the levels of reducing sugars in the potato and subsequently reduce the acrylamide and improve chip coloration and appearance.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.8 no.1
• /
• pp.77-82
• /
• 2000

Seven constructed and three natural tidal flats were compared to evaluate state-of- the-art of creation and restoration technology for tidal flats. parameters studied were physico-chemical and biological characteristics of soils and rate of respiration. The natural tidal flats had higher contents of silts, nitrogen and organic matter compared to the constructed ones. The natural ones had reductive Bone below 2 cm whereas the constructed ones had oxidative zone from the surface to below 20 cm. The bacterial population in the soil of the constructed tidal flats was one to two magnitudes lower than that in the natural ones. Biomass of macrobenthos and microbial respiration rate, however, were not different significantly between the natural and the constructed tidal flats. The purification capacity by diatom+bacterial+meiobenthos and macrobenthos in the constructed tidal flats was higher than that in the natural ones due to deeper permeable layer for purification in the constructed tidal flats. There was an exceptional constructed tidal flat with similar physico-chemical and biological characteristics to natural ones. Shearing stress to the surface of the tidal flat by the flow of seawater was as low as that of natural ones. These hydraulic conditions seemed to be a controlling factor on structures and functions of tidal flats. The control of hydraulic condition seemed to be one of the most important factors to create natural-like tidal flats.