• Asian Journal of Turfgrass Science
• /
• v.24 no.1
• /
• pp.45-49
• /
• 2010

Research on nitrate-nitrogen ($NO_3-N$) leaching in turfgrass indicates that in most cases leaching poses minimal risk to the environment. Although there have been many studies investigating $NO_3-N$ leaching, there has been little research to investigate the effect of compaction level and rootzone mix on nitrogen (N) leaching. The research objective is to determine the effect of compaction level and rootzone mix on nitrogen leaching. The four rootzone mixes are 76.0:24.0, 80.8:19.2, 87.0:13.0 and 93.7:6.3 % (sand:soil). The four levels of compaction energies are 1.6, 3.0, 6.1, and 9.1 J $cm^{-2}$. Nitrogen was applied using urea at a rate of 147 kg $ha^{-1}$ split among three applications. Rootzone was packed into a polyvinylchloride pipe with a perforated bottom to facilitate drainage. Rootzone depth was 30 cm over a 5 cm gravel layer. Each column was sodded with Poa pratensis L. Hoagland solution designed for coolseason grasses, minus N, was used to ensure adequate nutrition in the rootzone. Turf grass quality and clipping yield were recorded from each tube at two-week intervals. The clippings were oven-dried at a temperature of $67^{\circ}C$ for 24 h and weighed. At the end of the study, root dry weight was determined by washing and oven-drying samples at $67^{\circ}C$ for 24 h. Leachate solution was collected weekly for analysis. More than 6.1 J $cm^{-2}$ of compaction energy increased possibilities of surface runoff. The compaction energy between 3.0 and 6.1 J $cm^{-2}$ produced more clipping dry weight and less N leaching than 9.1 J $cm^{-2}$.

• Korean Journal of Environment and Ecology
• /
• v.37 no.1
• /
• pp.1-12
• /
• 2023

We analyzed the distribution area of debris slopes in Mudeungsan (Mt. Mudeung) National Park by comparing aerial photos of the past (1966) and the present (2017) and identified the vegetation characteristics that affect the change in the area of the debris slopes by investigating the vegetation status of the debris slopes and the surrounding areas. The area of debris slopes in Mt. Mudeung appears to have been reduced to a quarter of what it used to be. Debris slopes here have decreased at an average rate of 2.3 ha/yr over 51 years by vegetation covers. Notably, most of the small-area debris slopes in the low-inclination slopes disappeared due to active vegetation coverage. However, there are still west-facing, south-west-facing, south-facing, and large-area debris slopes remaining because the sun's radiant heat rapidly raises the surface temperature of rock blocks and dries moisture, making tree growth unfavorable. Because of these locational characteristics, the small-scale vegetation in the middle of Deoksan Stony Slope, which is the broadest area, showed distinct characteristics from the adjacent forest areas. Sunny places and tree species with excellent drying resistance were observed frequently in Deoksan Stony Slope. However, tree species with high hygropreference that grow well in valleys with good soil conditions also prevailed. In some of these places, the soil layer has been well developed due to the accumulation of fine materials and organic matter between the crevices of the rock blocks, which is likely to have provided favorable conditions for such tree species to settle and grow. At the top of Mt. Mudeung, on the other hand, the forest covered the debris slopes, where Mongolian oaks (Quercus mongolica) and royal azaleas (Rhododendron schlippenbachii), which typically grow in the highlands, prevailed. This area was considered favorable for the development of vegetation for the highlands because the density of rock blocks was lower than in Deoksan Stony Slope, and the soil was exposed. Moreover, ash trees (Fraxinus rhynchophylla) and Korean maple trees (Acer pseudosieboldianum) that commonly appear in the valley areas were dominant here. It is probably due to the increased moisture content in the soil, which resulted from creating a depressive landform with a concave shape that is easy to collect rainwater as rock blocks in some areas fell and piled up in the lower region. In conclusion, the area, density of the rock blocks, and distribution pattern of rock block slopes would have affected the vegetation development and species composition in the debris slope landform.

• Journal of Conservation Science
• /
• v.26 no.3
• /
• pp.229-245
• /
• 2010

The pupose of this study was to identify the material characteristics, firing environments and making techniques for the jar coffins from the Oryangdong kiln site and the Ungokdong tomb site in Naju. All jar coffins had very similar physical, mineralogical and geochemical characteristics, although it was excavated from the different sites. The wall thickness of the jar coffins was about 2.3 to 5.3 cm. Under the microscopy, the jar coffins include a large quantity of various quartz with some microcrystalline and showed partly orthoclase and biotite. It is presumed that the mineral sherds added to maintain the thick wall and to control the percentage of contraction during drying and firing of jar coffins and it has contained about 11.4 to 19.8 %. Firing temperature of the jar coffins is estimated as 1,000 to $1,150^{\circ}C$. Also, all jar coffins and soils show similar geochemical behavior of elements and clay-mineralization degree within the site. This indicates making that the soil is probable to be a raw material of the jar coffins. But it shows different characteristics in major elements of soils which is collected at the kiln floor and the trench region of the Oryangdong kiln site because of the lack of quartz and feldspar in the soils. Therefore, it can use of the jar coffins making clay, if it goes through a simple special process such as mixing temper.

• International Journal of Highway Engineering
• /
• v.4 no.2 s.12
• /
• pp.33-42
• /
• 2002

The cracks in the pavements result from drying shrinkage, temperature change, repeated traffic loadings and so on. The reduction of soil support, spatting and many local failures are caused by water and incompressible foreign materials infiltrated into the cracks. In order to reduce this kind of problems the crack width must be controlled and managed by the accurate measurement. The current method is a visual survey using a microscope, which requires traffic blocking. The purpose of this study is to find the best condition to measure accurate crack width using automated pavement condition survey equipment running at the similar speed as other vehicles. In this study pavement surfaces are filmed on an enlarged scale by the camera with a zoom lens, and then the proper focal distance is determined according to the crack width through a pilot survey. The conditions for measurement of the accurate crack width using the image processing technique are suggested by comparing crack widths surveyed using a microscope in the field with those computed by various factors in the image processing program, STADI-2. In conclusion, the camera with a focal distance of 75m could detect crack range of 0.5mm$\sim$1.2mm In width with an accuracy of 80% for CRCP. The camera with a focal distance of 12.5mm could detect crack range of 1.8mm$\sim$3.3mm in width with an accuracy of 90% for asphalt pavement.

• Journal of Food Hygiene and Safety
• /
• v.31 no.2
• /
• pp.99-106
• /
• 2016

This study was aimed to assess microbiological contamination level of Liriope platyphylla farms (A, B, and C) located in Cheongyang, Chungnam province. Specimens sampled from those farms and L. platyphylla tuberous roots were assessed for sanitary indication bacteria such as total aerobic bacteria, coliforms, and Escherichia coli and pathogenic bacteria such as Escherichia coli O157:H7, Listeria monocytogenes, Salmonella spp., Staphylococcus aureus and Bacillus cereus, quantitatively and qualitatively. As a result, those farms are not contaminated by E. coli O157:H7, L. monocytogenes, Salmonella spp., at all. And S. aureus was only found qualitatively from workers' gloves at a farm. As a whole, those farms (soil, harvest container, harvester, cleanser, washing water and tray) were maintained in a low level of microbiological contamination. However a cleanser was contaminated by coliforms ($4.35log\;CFU/100cm^2$), and it is required to improve farm hygiene. Microbiological contamination level of L. platyphylla tuberous root was decreased in the postharvest process including washing and drying.

• Journal of Conservation Science
• /
• v.35 no.5
• /
• pp.453-469
• /
• 2019

The celadon jar with inscription of 'the Fourth Sunhwa Year' is an important chronology that shows the conditions of production of the early celadon due to the inscription on the bottom including its purpose, application, and the producer. This celadon jar has been restored several times in the past. However, concerns over the structural stability, such as the separation and level differences in the joined cracks, have risen because of the aging of the repair materials, which were subjected to various environmental changes over a long time. By examining the conditions of preservation, the major damage was identified as the '入' shaped crack on the front, the 'V' shaped restored part and the crack on its left side, and the 'J' shaped crack on the back side. In the past, the cracks were found to be joined using a refined lacquer containing camphor, drying oil, rosin, etc. mixed with soil powder. The joint line was repainted with the refined lacquer and covered with gold powder. The missing parts were restored with gypsum and colored with acrylic color. After that, the repair materials were aged and emergency treatment was performed at the National Museum of Korea in 1981. At that time, Cemedine C or Cemedine C mixed with microballoons was used for reinforcing the cracks. Conservation treatment focused on removing the past repair materials and reinforcing the physically fragile parts by joining and restoring them based on the examination of the preservation condition. in addition, the area around the restored part was colored for future exhibition.

• 보존과학연구
• /
• s.34
• /
• pp.50-61
• /
• 2013

The Grave encapsulated by lime soil mixture were excavated with clothing and hemp shoes from the Choseon Dynasty in Gooam, Sacheon. Hemp shoes have wood in the center and their surroundings were made of complex materials including herbaceous ones but the front part was lost or became very fragile. We analyzed the hemp shoes and pre-test of consolidant for conservation treatment of hemp shoes. As a result of analyzing, three kinds of plants were identified. For hemp shoes, Oryza spp, hemp, and one kind of dicotyledones were used and it was analyzed that fabrics attached to the back of Dogaengi was cotton. Conservation methods for pre-test of consolidant, Polyethylene Glycol, Paraloid-B72, Dammar gum, Methyl Cellulose and Silicone resin was selected. The solution was sprayed twice in a 24-hour duration. Properties of consolidant was measured; color difference, glossiness difference, folding streangth and tensile streangth. By comparing the results, PEG was confirmed to the most suitable as consolidant. For the conservation treatment, cleaning and strengthening was conducted. For strengthening treatment, PEG 4000 was selected given that the shoes were made of complex materials. The PEG impregnation method was applied with the PEG 4000 concentration gradually changing from 5% to 80% for reinforcement. Then humidity- controlled drying in order to avoid any rapid environment change.

• Journal of Wetlands Research
• /
• v.13 no.2
• /
• pp.231-242
• /
• 2011

Recently, the green spaces in the urban areas were greatly reduced due to urbanization and industrialization. As urban structures such as roads and buildings are built, the amount of impervious area within a watershed increases. High impervious surfaces are the common causes of high runoff volumes as the soil infiltration capacity decreases and the volume and rate of runoff increase thereby decreasing the groundwater recharge. These effects are causing many environmental problems, such as floods and droughts, climate change, heat island phenomenon, drying streams, etc. Most cities attempted to reduce sewer overflows by separating combined sewers, expanding treatment capacity or storage within the sewer system, or by replacing broken or decaying pipes. However, these practices can be enormously expensive than combined sewer overflows. Therefore, in order to improve these practices, alternative methods should be undertaken. A new approach termed as "Low Impact Development (LID)" technology is currently applied in developed countries around the world. The purpose of this study was to effectively manage runoff by adopting the LID techniques. Small Constructed Wetland(Horizontal Subsurface Flow, HSSF) Pilot-scale reactors were made in which monitoring and experiments were performed to investigate the efficiency of the system in removing pollutants from runoff. Based on the results of the Pilot-plant experiments, TSS, $COD_{Cr}$, TN, TP, Total Pb removal efficiency were 95, 82, 35, 91 and 57%, respectively. Most of the pollutants were reduced after passing the settling tank and the vertical filter media. The results of this study can contribute to the conservation of aquatic ecosystems and restoration of natural water cycle in the urban areas.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.12 no.2
• /
• pp.176-187
• /
• 1983

Volatile flavor components of garlic and factors which influence on its flavors were reviewed. Growth, storage and processing conditions influence on the flavor intensity of garlic. To intensify garlic flavors, it is desirable that sufficient sulfate nutrition be supplied to the soil of growing garlic and that the suggested proportions of mineral composition and water content be considered. And to maintain the flavor intensity of post harvested garlic, flavor losses taken place during over inter storage mainly due to respiration, sprout and decay, have to be minimized. Among the various storage methods, combination method of post harvest hot-air drying and low temperature ($0^{\circ}C$), low humidity (RH 70-75%) is useful. The flavor of processed garlic is very much decreased as compared with that of fresh, and the decreasing rate of flavors depends on processing method. The synthetic garlic flavors were obtained by three types based on intermediate thiosulfinate, S-alk(en) yl-$\small{L}$-cyteine sulfoxlde-alliinase fission products and $\small{L}$-5-alk (en)yl thiomethylhydantoin ${\pm}$ S-oxides. These synthetic garlic flavors may be promised to be applied to food additives.

• Journal of Conservation Science
• /
• v.37 no.5
• /
• pp.536-544
• /
• 2021

In the present study, safe management and value improvement of bamboo sunblind, which is an item of cultural heritage, were performed by adopting stable conservation treatment methods. The bamboo sunblind used in the present study was excavated from No. 1 catchment site in Baesanseongji, Busan. It was determined that the main material used to make the sunblind was bamboo, and herbal plants were used to weave the bamboo using lacquer as an adhesive agent. All contaminants and soil adhered to the sunblind was removed. Thereafter, the sunblind, which was recovered in the form of blocks, was washed separately after fixing it to a temporary plaster frame and to avoid the blocks from breaking during washing. Then, polyethylene glycol (PEG) impregnation was utilized for the reinforcement treatment. Based on the preliminary test results, the shape of the sunblind was fixed using a stainless-steel frame to prevent physical damage that may occur during the drying process. Thereafter, the bamboo sunblind was vacuum freeze-dried. PEG 20% (in ethyl alcohol) was applied as a surface treatment agent for stabilization the sunblind. After the surface treatment, the bamboo sunblind were joined together to fit the maximum width, and the rectangular shape of the sunblind was restored-as best as possible-while filling in the missing parts by maximizing the use of unknown members such as in the disturbed layers below bamboo sunblind surface. The conservation treatment was completed by fixing the bamboo sunblind into the fabricated frame.