• Korean Journal of Soil Science and Fertilizer
• /
• v.41 no.2
• /
• pp.94-102
• /
• 2008

The physico-chemical properties of ten reclaimed saline soils in five soil series of west-south Korea were analyzed according to the years past after reclamation. The soil samples were collected at the same sites two times in 2000 and 2004. The physico-chemical properties in 2000 had been changed in 2004 as follows. Soil salinity was the highest in Podu and desalinization period was the shortest in Munpo and Yeompo. Seasonal ground water level were above 100 cm in all regions that were 30 years old reclaimed tidal land, which was the same results of normal paddy field. In the case of soil physical changes, bulk density increased in fine textured soil (Poseung and Podu) but decreased in coarse textured soil (Gwanghwal, Munpo, and Yeompo). Porosity decreased in fine textured soil(Poseung and Podu) but increased in coarse textured soil. These reason were as follows. Fine textured soil were increased in solid phase but decreased in liquid and gaseous phase. Coarse textured soil, Gwanghwal and Munpo except for Yempo, were increased in gaseous phase but decreased in solid and liquid phase. Yempo that have low water table level were increased in liquid phase but decreased in solid and gaseous phase. Soil hardness increased in 4 soil series except for Munpo. In the case of chemical property changes, although there were more or less difference, it showed decreasing tendencies. Soil pH, the content of organic matter, available phosphate, and available silicate of five soil series were decreased during the four years. The content of exchangeable cation also decreased except for magnesium.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.151-151
• /
• 2011

Large amounts of natural gas, mainly methane, in the form of hydrates are stored on continental margins. When gas hydrates are dissociated by any environmental trigger, generation of excess pore pressure due to released free gas may cause sediment deformation and weakening. Hence, damage on offshore structures or submarine landslide can occur by gas hydrate dissociation. Therefore, geotechnical stability of gas hydrate bearing sediments is in need to be securely assessed. However, geotechnical characteristics of gas hydrates bearing sediments including small-strain elastic moduli have been poorly identified. Synthesizing gas hydrate in natural seabed sediment specimen, which is mainly composed of silty-to-clayey soils, has been hardly attempted due to their low permeability. Moreover, it has been known that hydrate loci in pore spaces and heterogeneity of hydrate growth in specimen scale play a critical role in determining physical properties of hydrate bearing sediments. In the presented study, we synthesized gas hydrate containing sediments in an instrumented oedometric cell. Geotechnical and geophysical properties of gas hydrate bearing sediments including compressibility, small-strain elastic moduli, elastic wave, and electrical resistivity are determined by wave-based techniques during loading and unloading processes. Significant changes in volume change, elastic wave, and electrical resistivity have been observed during formation and dissociation of gas hydrate. Experimental results and analyses reveal that geotechnical properties of gas hydrates bearing sediments are highly governed by hydrate saturation, effective stress, void ratio, and soil types as well as morphological feature of hydrate formation in sediments.

• Journal of the Korean Geosynthetics Society
• /
• v.22 no.3
• /
• pp.37-46
• /
• 2023

In this paper, the physical properties, stress deformation and strength characteristics, density and permeability characteristics of silty sand (SM) by fines content were analyzed through indoor tests. also based on the results of the indoor tests, a compact analysis was performed according to the content of SM, and the applicability of SM ground to the compacted target layer was evaluated by comparing it with the measurement data of the actual problem site. As a result of indoor tests and compression analysis, SM changed its mechanical properties from sandy soil to viscous soil when the fine particle content was 35% or higher, and using field measurement data, SM was found to have a higher compression tendency than direct subsidence. Therefore, the mechanical characteristics of SM above Fc 35% are considered to be similar to that of viscous soil, which is different from the compression characteristics of the tendency of immediate subsidence to conventional sandy soil, so it is necessary to present the mechanical characteristics of SM through further research. The research findings highlight the importance of considering consolidation settlement in silty sand (SM) when evaluating soft soil conditions. These findings can aid in revising criteria for assessing weak ground conditions by providing essential engineering property data based on varying fines content in silty sand.

• Korean Journal of Environmental Agriculture
• /
• v.36 no.2
• /
• pp.67-72
• /
• 2017

BACKGROUND:Cultivation of alternative crops in paddy fields is necessary because of the decrease in rice consumption and the increase in excess stock of rice. The study was conducted to investigate the effects of alternative crops cultivation in paddy fields on soil physico-chemical characteristics and crop yield. METHODS AND RESULTS: Soybean (Glycine max), red-clover (Trifolium pratense), and water convolvulus (Ipomoea aquatica) were selected for alternative crops in the first and/or second year and rice was planted in the third year. When alternative crops were cultivated in the previous year, soil bulk density, soil hardness, and water content were lower than those for rice cultivation. Water-depth decreasing rate and aggregate content were greater for the upland-upland-paddy cropping system than upland-paddy-paddy cropping system. Cultivation of red-clover and water convolvulus for two years resulted in the high soil organic matter content. In the third year, available phosphate, exchangeable potassium, and soil cation exchange capacity were relatively high when soybean was cultivated in the previous year. In the first year, water convolvulus cultivation showed greater productivity than red-clover cultivation while the opposite pattern was found in the second year. Rice yield in the third year was greater for soybean or red-clover as a previous crop than for water convolvulus as a previous crop. CONCLUSION: The results suggest that cultivation of alternative crops in paddy fields can improve soil physical properties including bulk density, hardness, water content, and aggregate content as well as rice productivity.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.137-137
• /
• 2017

Rice has important role as a primary food resource in especially the Asia, Korea, China, India, Indonesia and Japan. After development and increasingly using artificial chemical fertilizer, rice is getting high quality and quantity to satisfy ever-increasing people. On the other hand, the earth environment is more polluted each day. Nowadays consumers are looking for the organic crops or foods that were grown with eco-friendly method and in pure farmland. With the immergence of this trend, it is time to development environmentally-friendly agriculture. One of the methods is growing green manure crops in winter or spring on the fields. For this reasons, growing rye and Italian ryegrass are useful to use green manure to enhance rice production without chemical fertilizers and make the property of the soil eco-friendly. To know how improve the quality and quantity of rice with green manures, rye and Italian ryegrass, first the characteristics of green manure corps were measured. Dry matter yields of the rye and Italian ryegrass were 2.21 and $1.81t\;Ha^{-1}$. And the percentages of the dry matter were 28 and 32%. And, analyzed mineral components in rye and Italian ryegrass were nitrogen, organic matter, $P_2O_5$, CaO, $C_2O$ and MgO. Specially, the percentages of the organic matter and the CaO between rye and Italian ryegrass have difference appreciably. the height of the rice on the Italian ryegrass-fertilized field was the highest among the variant fields. The height of the rice on the non-fertilized field was the lowest. Yield of the Italian ryegrass-, rye- and non-fertilized rice are 805.2, 639.9 and $415.3kg\;10a^{-1}$. At the result, Italian ryegrass is the most effective green manure among the 3 treated-fertilized.

• Applied Chemistry for Engineering
• /
• v.27 no.6
• /
• pp.664-668
• /
• 2016

The contamination in soil, underground water and river environment became serious due to illegal waste dumping. In this study, our research group analyzed the oil species of illegally disposed oils from J City. After pretreating the mixture of oil, water and solid phases to obtain homogeneous phase components, the physical property analysis, atom analysis, and gas chromatography were performed. From the results showing 11.8% of oxygen content, $-6^{\circ}C$ of pour point and chromatogram pattern. the contaminated oil was identified as a vegetable one. High performance liquid chromatography (HPLC) analysis was also performed in order to know what kind of vegetable oil was, and the ratio of LLO, OOL and POL was found to be high indicating that the disposed oil is majorly the used soybean oil with some vegetable oil mixtures. This study can be used for identifying contaminators for oils from the illegal waste dumping.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.6
• /
• pp.721-729
• /
• 2015

Wood properties depend on not only environmental factors such as soil, climate change, or forest stand characteristics, but also silviculture practices such as thinning, regeneration, or selection. This study report influences of the extent of thinning intensity from no thinning, moderate and heavy thinning to the wood property of Quercus acuta forest stands in Wan-do arboretum, Jeollanam-do Province. The results showed that there were close relationships between thinning intensity and anatomical, physical or mechanical properties of Quercus acuta wood. Especially, there are close relationships between thinning intensity and ring width or mechanical properties of wood. As a result, this study showed high correlations between Quercus acuta wood properties and thinning intensity of Quercus acuta forest stand. These findings are expected to be very useful as fundamental data for the implementation of silviculture practices of this specie to produce timber.

• Tunnel and Underground Space
• /
• v.17 no.3 s.68
• /
• pp.175-185
• /
• 2007

When filling material such as clay is included along the discontinuity, it may cause instability on a slope even if the direction of discontinuity works in a positive way. In the study area, slope sliding occurred at the boundary between a clay filling material and weathered soil because the physical properties differ across the boundary; and this is very similar to the situation where foliation in a rock works as a weak zone during a structural behavior, causing an inter-layer slip. In most analysis, if there exists a clay filling material, a single discontinuity is assumed to perform analysis. In those cases, the discontinuity is modeled as a slip surface within clay. Therefore, the characteristics of the boundary are not considered in the analysis, so that ultimately the physical property of clay usually prevails. The result of evaluating the slope stability affected by clay filling material shows the significant difference in the safety level due to the strength parameter depending on the failure type of the discontinuity by a filling material.

• Geomechanics and Engineering
• /
• v.18 no.2
• /
• pp.179-188
• /
• 2019

This paper presents an experimental study to evaluate the effect of palm oil on the selected basic physical-chemical and geotechnical properties of kaolin. The experimental findings are further compared with literature outcomes investigating similar properties of fine grained soils subjected to contamination by different types of oils. To this end, palm oil was mixed with oven dried kaolin samples-aiding oil's interaction (coating) with dry particles first, in anticipation to emphasize the effect of oil on the properties of kaolin, which would be difficult to achieve otherwise. Oil content was limited to 40% by dry weight of kaolin, supplemented at intervals of 10% from clean kaolin samples. Observations highlight physical particle-to-particle bonding resulting in the formation of pseudo-silt sized clusters due to palm oil's interaction as evinced in the particle size distribution and SEM micrographs. These clusters, aided by water repellency property of the oil coating the kaolin particles, was analyzed to show notable variations in kaolin's consistency-measured as liquid and plastic limits. Furthermore, results from compaction tests indicates contribution of oil's viscosity on the compaction behavior of kaolin - showing decrease in the maximum dry unit weight (${\gamma}_{d,max}$) and optimum moisture content ($w_{opt}$) values with increasing oil contents, while their decrease rates were directly and inversely proportional in ${\gamma}_{d,max}$ and $w_{opt}$ values with oil contents respectively. Comparative study in similar terms, also validates this lower and higher decrease rates in ${\gamma}_{d,max}$ and $w_{opt}$ values of the fine grained soils respectively, when subjected to contamination by oil with higher viscosity.

• Resources Recycling
• /
• v.33 no.1
• /
• pp.48-57
• /
• 2024

This study aimed to improve utilization of the Class C vinyl waste generated in rural areas based on a preliminary investigation on the use of eco-powder, generated through pyrolysis, as a raw material for plastic. The efficiency of pre-processing treatments in controlling ash content of the generated eco-powder and its effect on the basic properties of manufactured plastic were evaluated. The basic properties included ash content of the compressed eco-powder at different levels of ash content, impact strength, flexural strength, and tensile strength. The experimental results confirmed that pre-processing improved the separation efficiency of soil particles and vinyl waste through physical impact. The eco-powder with ash content of less than or equal to 26% was found to satisfy the target performance during impact strength, flexural strength, and tensile strength evaluation. Thus, it was confirmed that the Class C vinyl waste, having low utilization and recovery rates, could be effectively utilized as a plastic raw material after optimum thermal treatment and physical processing using the eco-powder.