• Explosives and Blasting
• /
• v.40 no.4
• /
• pp.15-26
• /
• 2022

With the recent increase in old and dangerous buildings, the demand for technology in the field of structure demolition is rapidly increasing. In particular, in the case of structures with severe deformation of damage, there is a risk of deterioration in stability and disaster due to changes in the load distribution characteristics in the structure, so rapid structure demolition technology that can be efficiently dismantled in a short period of time is drawing attention. However, structural deformation such as unauthorized extension or illegal remodeling occurs frequently in many old structures, which is not reflected in structural information such as building drawings, and acts as an obstacle in the demolition design process. In this study, as an effective way to overcome the discrepancy between the structural information of old structures and the actual structure, access to actual structures through 3D modeling was considered. 3D point cloud data inside and outside the building were obtained through LiDAR and drone photography for buildings scheduled to be blasting demolition, and precision matching between the two spatial data groups was performed using an open-source based spatial information construction system. The 3D structure model was completed by importing point cloud data matched with 3D modeling software to create structural drawings for each layer and forming each member along the structure slab, pillar, beam, and ceiling boundary. In addition, the modeling technique proposed in this study was verified by comparing it with the actual measurement value for selected structure member.

• KIPS Transactions on Software and Data Engineering
• /
• v.12 no.6
• /
• pp.267-274
• /
• 2023

In this paper, a method for estimating the illuminant chromaticity of a scene for an input image is proposed. The illuminant chromaticity is estimated using the illuminant reference region. The conventional method uses a certain number of reference lighting information. By comparing the chromaticity distribution of pixels from the input image with the chromaticity set prepared in advance for the reference illuminant, the reference illuminant with the largest overlapping area is regarded as the scene illuminant for the corresponding input image. In the process of calculating the overlapping area, the weights for each reference light were applied in the form of a Gaussian distribution, but a clear standard for the variance value could not be presented. The proposed method extracts an independent reference chromaticity region from a given reference illuminant, calculates the characteristic values in the r-g chromaticity plane of the RGB color coordinate system for all pixels of the input image, and then calculates the independent chromaticity region and features from the input image. The similarity is evaluated and the illuminant with the highest similarity was estimated as the illuminant chromaticity component of the image. The performance of the proposed method was evaluated using the database image and showed an average of about 60% improvement compared to the conventional basic method and showed an improvement performance of around 53% compared to the conventional Gaussian weight of 0.1.

• Journal of Korea Port Economic Association
• /
• v.38 no.4
• /
• pp.45-64
• /
• 2022

Due to the recent and rapid globalization, logistics outsourcing has expanded globally and is seen as a means of creating a robust logistics system. However, many businesses continue to have difficulties with their logistics outsourcing contracts, which compels them to reinstate the logistics function for internal management. This study aims to investigate how organizational capabilities of logistics service providers (LSPs), notably flexibility, integration, innovation, and technological capabilities, impact on the logistics outsourcing success in Ugandan food processing firms. Using a structured questionnaire survey, cross-sectional data collected from 211 food processing firms in Kampala - Uganda were analyzed by partial least squares-structural equation modeling (PLS-SEM) using SmartPLS 3.3.7 software to examine the theorized relationships. The study findings revealed that whereas the technological and innovation capabilities positively and significantly influence logistics outsourcing success, the effects of flexibility and integration capabilities were insignificant. Additionally, the importance-performance map analysis (IPMA) reveals that the technological capability is a priority capability, followed by the innovation capability if logistics outsourcing success is to be achieved. Conversely, flexibility and integration capabilities are of low priority.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.35 no.4
• /
• pp.75-83
• /
• 2023

Apart from implementing hardware solutions like raising the crest freeboard of coastal structures to efficiently counter wave-overtopping, there is a simultaneous requirement for software-driven disaster mitigation strategies. These tactics involve the swift and accurate dissemination of wave-overtopping information to the inland regions of coastal zones, enabling the regulation of evacuation procedures and movement. In this study, a method was proposed to estimate wave-overtopping by utilizing the temporal variation of wave heights exceeding the structure's crown level, with the aim of developing an on-site wave measurement system for providing wave-overtopping information in the field. Laboratory model experiments were conducted on vertical seawall structures to measure wave-overtopping volumes and wave runup heights under different wave conditions and structural freeboard variations. By assuming that the velocity of water inundation on the top of the structure during wave-overtopping events is equivalent to the long-wave velocity, an overtopping discharge coefficient was introduced. This coefficient was utilized to estimate the rate of wave-overtopping based on the temporal changes in wave runup heights measured at the top of the structure. Upon reasonably calculating the overtopping discharge coefficient, it was verified that the estimation of wave-overtopping could be achieved solely based on the wave runup heights.

• Journal of Service Research and Studies
• /
• v.13 no.1
• /
• pp.127-143
• /
• 2023

Currently, the domestic traditional market has not escaped the swamp of stagnation that began in the early 2000s despite various projects promoted by many related players such as the central government and local governments. In order to overcome the crisis faced by the traditional market, various R&Ds have recently been conducted on how to build a smart traditional market that combines information and communication technologies such as big data analysis, artificial intelligence, and the Internet of Things. This study analyzes various previous studies, users of traditional markets, and application cases of ICT technology in foreign traditional markets since 2012 and proposes a model to build a smart traditional market using ICT technology based on the analysis. The model proposed in this study includes building a traditional market metaverse that can interact with visitors, certifying visits to traditional markets through digital signage with NFC technology, improving accuracy of fire detection functions using IoT and AI technology, developing smartphone apps for market launch information and event notification, and an e-commerce system. If a smart traditional market platform is implemented and operated based on the smart traditional market platform model presented in this study, it will not only draw interest in the traditional market to MZ generation and foreigners, but also contribute to revitalizing the traditional market in the future.

• Industry Promotion Research
• /
• v.8 no.2
• /
• pp.37-43
• /
• 2023

Sampling In this study, we examined the problems and their improvement plans associated with the reliability management sector in quality management engineer test conducted in Korea. First of all, there seems to be a problem in that the terminology is not unified and some techniques essential for reliability analysis are not included. We also looked at quality and reliability tests performed in foreign countries (especially USA) that Koreans often acquire. In particular, it can be seen that the CRE test almost overlaps with the contents of the reliability management engineer test in Korea. However, while the USA is an open book test, Korea is not, so the problem is that there are too many formulas to memorize on the part of the test takers. In addition, the analysis of the data is done manually without using computer software. If the test were an open book test like the CRE test in USA, it will be a test that can go beyond fragmentary knowledge and check whether test takers have the essential elements in reliability management. Lastly, if we adopt re-certification system through education and work within a certain period of time, as in USA, it will be a qualification test suitable for modern people living in a flood of information.

• Therapeutic Science for Rehabilitation
• /
• v.12 no.2
• /
• pp.69-83
• /
• 2023

Objective : This study, as a preliminary study, applied an Information & Communication Technology (ICT) home-based program to elderly people aged 65 years or older to confirm the effect of the cognitive enhancement program and to find the possibility of remote rehabilitation. Methods : This study from August to October 2022, three subjects were selected and the intervention was conducted for about 2 months. This intervention was conducted using Korean version of Mini-Mental State Examination, Korean version of Montreal Cognitive Assessment (MoCA-K), Computer Cognitive Senior Assessment System, and the Center for Epidemiologic Studies Depression scale to evaluate cognitive improvement before and after the program. The therapist remotely set the level of cognitive training according to the subject's level through weekly feedback. Results : After the intervention, all subjects showed improved scores in most items of the MoCA-K conducted before and after the intervention. In addition, among the items of Cotras-pro, upper cognition, language ability, attention, visual perception, and memory were improved. Conclusion : Cognitive rehabilitation training using an ICT home-based program not only prevented dementia but also made it habitual. Through this study, it was confirmed that remote rehabilitation for the elderly could be possible.

• KIPS Transactions on Software and Data Engineering
• /
• v.11 no.12
• /
• pp.489-498
• /
• 2022

Recently, the textile industry, which is labor-intensive, is attempting to reduce process costs and optimize quality through artificial intelligence. However, the fiber spinning process has a high cost for data collection and lacks a systematic data collection and processing system, so the amount of accumulated data is small. In addition, data imbalance occurs by preferentially collecting only data with changes in specific variables according to the purpose of fiber spinning, and there is an error even between samples collected under the same fiber spinning conditions due to difference in the measurement environment of physical properties. If these data characteristics are not taken into account and used for AI models, problems such as overfitting and performance degradation may occur. Therefore, in this paper, we propose an outlier handling technique and data augmentation technique considering the characteristics of the spinning process data. And, by comparing it with the existing outlier handling technique and data augmentation technique, it is shown that the proposed technique is more suitable for spinning process data. In addition, by comparing the original data and the data processed with the proposed method to various models, it is shown that the performance of the tensile tenacity and elongation prediction model is improved in the models using the proposed methods compared to the models not using the proposed methods.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.6 no.3
• /
• pp.383-391
• /
• 2016

Ballast water provides stability and manoeuvrability to a ship. Foreign harmful aquatic organisms, which were transferred by ballast water, cause disturbing ecosystem. In order to minimize transference of foreign harmful aquatic organisms, IMO(International Maritime Organization) adopted the International Convention for the Control and Management of Ship's Ballast Water and Sediments in 2004. If the convention take effect, a port authority might need to check that ballast water is properly disposed of. In this paper, we propose a method of counting harmful aquatic organisms in ballast water thorough image processing. We extracted three samples from the ballast water that had been collected at Busan port in Korea. Then we made three grey-scale images from each sample as experimental data. We made a comparison between the proposed method and CellProfiler which is a well known cell-counting program based on image processing. Setting of CellProfiler is empirically chosen from the result of cell count by an expert. After finding a proper threshold for each image at which the result is similar to that of CellProfiler, we used the average value as the final threshold. Our experimental results showed that the proposed method is simple but about ten times faster than CellProfiler without loss of the output quality.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.7 no.12
• /
• pp.871-879
• /
• 2017

The purpose of this study is to propose a Busan tourism industry in which the 2016 OECD Tourism policy and ICT convergence platform are applied. OECD proposed 3 policies to promote the tourism industry: First, to maintain the competitiveness of the tourism industry as well as improve its efficiency and sustainability, second, to establish a seamless traffic system, and third, to build a response to the sharing economy. Centering on the OECD's three policies, we propose the developmental possibilities of tourism in Busan. At the same time, we suggest the necessity to build an ICT convergence platform that will help foster the industry. In building an ICT convergence platform, we especially focus on the necessity of: 1. Sharing and creating experience-based interactive contents on the software side, and 2. Developing high quality user experience (UX) and providing a data analysis-based customized service on the hardware side. In addition, we insist on the establishment of the Tourism Promotion Agency for the continuous performance and management of Busan tourism industry. The study ultimately suggests that the construction of ICT convergence platform based on OECD tourism policy can result in the expected outcomes of high effects with low cost for both consumers and suppliers related to the tourism industry.