• Journal of the Korean Home Economics Association
• /
• v.44 no.7 s.221
• /
• pp.153-162
• /
• 2006

This study was attempted to investigate the possibilities of fitness evaluation of virtual model using 3D clothes modeling software. For the purpose, two one-piece dresses were made with two kinds of patterns using Qualoth program, and then each dress was fitted to a real model and a virtual model, and the results were compared and discussed. The result of this study was as follows. First, the fitness evaluation of real model showed a significant difference only at a little difference in figures (1-2.5cm) of the pattern, while any significant difference in appearance was not found in case of a virtual model fitted a dress made out of a pattern with the same difference in figures. Second, items to evaluate a difference in patterns using 3D clothes modeling software were shoulder line, the distance between shoulder points, armhole line, ease of armscye depth, and overall appearance. Because all the items fall under design lines which make up outer lines of a cloth, it can be said that the Qualoth program is good for representing design, rather than exposing a small difference in patterns.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2016.01a
• /
• pp.117-119
• /
• 2016

본 논문에서는 IOT 서비스와 접목하여 사회적 약자를 보호할 수 있는 시스템에 대해 제안하고자 한다. 최근 사회적 약자(영유아, 노인, 환자 등) 대상의 보호시설 내부에서 폭행 사건이 빈번하게 발생하고 있다. 안전해야 할 보호시설(보육시설 및 요양원, 실버타운)에서 발생하는 문제로 인해 보호자들은 기관을 신뢰할 수 없게 되었고 이는 매출감소 및 이미지 악화 등의 연쇄적인 사회적 문제로 발전하고 있다. 이러한 문제를 감소시키고자 방범용 CCTV, 녹음 어플리케이션의 사용이 해결책으로서 제시되고 있지만, 폐쇄적인 시스템 구조로 인해 기록의 은폐 및 추가적인 병리 현상 발생의 가능성이 염려 되어 근본적인 문제 해결이 어렵다고 판단되었다. 그래서 보호시설 내부에 비콘과 영상장비를 설치하고 웨어러블과 같은 모바일 디바이스를 활용하여 보호자가 피보호자(사회적 약자)의 위치를 실시간으로 파악하고 상태를 볼 수 있도록 하는 휴먼케어시스템의 개발을 제안하고자 한다.

• Solar Energy
• /
• v.11 no.1
• /
• pp.50-60
• /
• 1991

A centrifugal pump was selected as a basic study, for it was utilized widely at the industry among various types of pumps. The purpose of this study was to develop the software for design of centrifugal pump. The step of this design was divided into two stages. First, the impeller was designed by the experiences and theory of A.J.Stepanoff, and the head was checked whether the design of impeller was acceptable. Second, the volute chamber was designed by the Archimedes spiral. Then, These procedures of impeller and volute chamber were developed into the software in C-language. Checked the validity of the developed software, the results were consistent with the actual pump produced domestically.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.852-853
• /
• 2016

In this paper, we propose a profile design of customized sports content curation system for activating daily sports. The proposed profile is a system that recommends sports convergence contents in everyday life tailored to the characteristics of profile in terms of the individual and team. Especially, the proposed profile is designed as the static profile that is changed depending on the user's feedback. The proposed design of profile design are to improve the happiness and health of individuals, it is expected to contribute the new service model development of in the field of Sport for All.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.2
• /
• pp.355-360
• /
• 2022

In this paper, we present design and developing method for EMS(environment monitoring system) of micro data center. This developing EMS monitors operating environment of micro data center and analyze sensing data through IoT(Internet of things) sensors in real time. Firstly we present configuration method of IoT sensing package and design method EMS hardware platform. Secondly we design data collector software for data collection of IoT sensor with different protocol and develop monitoring software of EMS. The data collector software consists of sensor collector module and collector manager module. Also we design EMS software which has micro service architecture structural style and component based business logic.

• The Korean Journal of Applied Statistics
• /
• v.23 no.3
• /
• pp.573-584
• /
• 2010

This paper considers the differences in the software execution environments in the testing phase and the operational phase to determine the optimal release time and warranty period of software systems. We formulate equations for the total expected software cost until the end of the software life cycle based on the NHPP. In addition, we derive the optimal release time that minimizes the total expected software cost for an imperfect debugging software reliability model. Finally, we analyze the sensitivity of the optimal testing and maintenance design related to variation of the cost model parameters based on the fault data observed in the actual testing process, and discuss the quantitative properties of the proposed model.

• Journal of information and communication convergence engineering
• /
• v.4 no.1
• /
• pp.23-27
• /
• 2006

The discipline of software performance is very broad; it influences all aspects of the software development lifecycle, including architecture, design, deployment, integration, management, evolution and servicing. Thus, the complexity of software is an important aspect of development and maintenance activities. Much research has been dedicated to defining different software measures that capture what software complexity is. In most cases, the description of complexity is given to humans in forms of numbers. These quantitative measures reflect human-seen complexity with different levels of success. Software complexity growth has been recognized to be beyond human control. In this paper, we have focused our discussion on the increasing software complexity and the issue with the problems being faced in managing this complexity. This increasing complexity in turn affects the software productivity, which is declining with increase in its complexity.

• Journal of Information Technology Applications and Management
• /
• v.20 no.3
• /
• pp.1-18
• /
• 2013

Software architecture is the blueprint for a software system and should provide consistent guidelines for design, implementation, and maintenance throughout the entire lifecycle of the system. Components, interactions between the components, well-formed structure, reasons, and various perspectives reflecting various stakeholders' concerns changing through the phases of software lifecycle are the key elements of software architecture. The architect identifies and engages the stakeholders, understands and captures stakeholder's concerns including those regarding life cycle, and lets the concerns reflected in the architecture. To do so, architect should take into consideration various contextual elements regarding the system too. We make an extended list of the elements, especially those of business application software architecture, that the architect should take into consideration and construct a model of the relationships between the elements.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.5 no.2
• /
• pp.89-101
• /
• 2005

Research on highly abstracted system modeling and simulation has received a great deal of attention as of the concept of platform based design is becoming ubiquitous. From a practical design point of view, such modeling and simulation must consider the following: (i) fast simulation speed and cycle accuracy, (ii) early availability for early stage software development, (iii) inter-operability with external tools for software development, and (iv) reusability of the models. Unfortunately, however, all of the previous works only partially addresses the requirements, due to the inherent conflicts among the requirements. The objective of this study is to develop a new system design methodology to effectively address the requirements mentioned above. We propose a new transaction-level system modeling methodology, called ViP (Virtual Platform). We propose a two-step approach in the ViP method. In phase 1, we create a ViP for early stage software development (before RTL freeze). The ViP created in this step provides high speed simulation, lower cycle accuracy with only minor modeling effort.(satisfying (ii)). In phase 2, we refine the ViP to increase the cycle accuracy for system performance analysis and software optimization (satisfying (i)). We also propose a systematic ViP modeling flow and unified interface scheme based on utilities developed for maximizing reusability and productivity (satisfying (ii) and (iv)) and finally, we demonstrate VChannel, a generic scheme to provide a connection between the ViP and the host-resident application software (satisfying (iii)). ViP had been applied to several System-on-a-chip (SoC) designs including mobile applications, enabling engineers to improve performance while reducing the software development time by 30% compared to traditional methods.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.4
• /
• pp.2379-2384
• /
• 2015

Bellows product is an important part in the area of plant engineering, shipbuilding and petrochemistry. For safety and durability it is necessary to consider lots of factors when designing it. This research developed a U-shaped metal bellows design software based on EJMA 9th Edition manual. This GUI software was developed by using Matlab software and can be able to design four types of bellows, Unreinforced Single Bellows, Unreinforced Double Bellows, Reinforced Single Bellows and Reinforced Double Bellows. The already proven bellows model was designed to verify this software. We investigated the behavior while changing the thickness of the bellows. As the thickness of bellows increases, spring rate, thrust force, stress increase and fatigue life decreases. This software will be helpful design engineers save time and effort.