• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.04a
• /
• pp.108-108
• /
• 2009

The main object of this research is to minimize the shock effects which frequently result in fatal damage in wind met mast on impact of barge. The collision between wind met mast and barge is generally a complex problem and it is often not practical to perform rigorous finite element analyses to include all effects and sequences during the collision. LS-dyna generally purpose explicit finite element code, which is a product of ANSYS software, is used to model and analyze the non-linear response of the met mast due to barge collision. A significant part of the collision energy is dissipated as strain energy and except for global deformation modes, the contribution from elastic straining can normally be neglected. On applying impact force of a barge to wind met mast, the maximum acceleration, internal energy and plastic strain were calculated for each load cases using the finite element method and then compare it, varying to the velocity of barge, with one varying to the thickness of rubber fender conditions. Hence, we restrict the present research mainly to the wind met mast and also parametric study has been carried out with various velocities of barge, thickness of wind met mast, thickness and Mooney-Rivlin coefficient of rubber fender with experimental data. The equation of motion of the wind met mast is derived under the assumption that it was ignored vertical movement effect of barge on sea water. Such an analyzing method which was developed so far, make it possible to determine the proper size and material properties of rubber fender and the optimal moving conditions of barge, and finally, application method can be suggested in designing process of rubber fender considering barge impact.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.17
• /
• pp.7169-7174
• /
• 2014

Background: NPAS2 is a product of the circadian clock gene. It acts as a putative tumor suppressor by playing an important role in DNA damage responses, cell cycle control and apoptosis. Chronic lymphocytic leukemia (CLL) appears to be an apoptosis related disorder and alteration in the NPAS2 gene might therefore be directly involved in the etiology of CLL. Here, the Ala394Thr polymorphism (rs2305160:G>A) in the NPAS2 gene was genotyped and melatonin concentrations were measured in a total of seventy-four individuals, including thirty-seven CLL cases and an equal number of age- and sex-matched healthy controls in order to examine the effect of NPAS2 polymorphism and melatonin concentrations on CLL risk in a Pakistani population. Materials and Methods: Genotyping of rs2305160:G>A polymorphism at NPAS2 locus was carried out by amplification refractory mutation system-polymerase chain reaction (ARMS-PCR). Melatonin concentrations were determined by enzyme linked immunosorbent assay (ELISA). Statistical analysis was performed using Statistical Package for Social Sciences software. Results: Our results demonstrated no association of the variant Thr genotypes (Ala/Thr and Thr/Thr) with risk of CLL. Similarly, no association of rs2305160 with CLL was observed in either females or males after stratification of study population on a gender basis. Moreover, when the subjects with CLL were further stratified into shift-workers and non-shift-workers, no association of rs2305160 with CLL was seen in either case. However, significantly low serum melatonin levels were observed in CLL patients as compared to healthy subjects (p<0.05). Also, lower melatonin levels were seen in shift-workers as compared to non-shift-workers (p<0.05). There was no significant difference (p>0.05) in the melatonin levels across NPAS2 genotypes in all subjects, subjects with CLL who were either shift workers or non-shift-workers. General Linear Model (GLM) univariate analysis revealed no significant association (p>0.05) of the rs2305160 polymorphism of the NPAS2 gene with melatonin levels in any of the groups. Conclusions: While low melatonin levels and shift-work can be considered as one of the risk factors for CLL, the NPAS2 rs2305160 polymorphism does not appear to have any association with risk of CLL in our Pakistani population.

• Journal of Navigation and Port Research
• /
• v.29 no.1 s.97
• /
• pp.91-96
• /
• 2005

The National Marine Electronics Association(NMEA) is nonprofit-making cooperation composed with manufacturers, distributors, wholesalers and educational institutions. We use the basic port of equipment in order to process the signal from NMEA signal using equipment. When we don't have enough one, we use the multi-port for processing. However, we need to have module development simulation which could multiplex and provide NMEA related signal that we could solve the problems in multi-port application and exclusive equipment generation for a number of signal. For now, we don't have any case or product using NMEA multiplexer so that we import expensive foreign equipment or embody NMEA signal transmission program like software, using multi-port. These have problems since we have to pay lots ci money and build separate processing part for every application programs. Besides, every equipment generating NMEA signal are from different manufactures and have different platform so that it could cause double waste and loss of recourse. For making up for it, I suggest the NMEA multiplexer embodiment, which could independently move by reliable process and high performance single hardware module, improve the memory efficiency of module by designing the optimized Queue, and keep having reliability for realtime communication among the equipment such as main input sensor equipment Gyrocompass, Echo-sound, and GPS.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.12
• /
• pp.367-371
• /
• 2019

The molding for hollow products used widely in industry is rotational molding by heating and cooling. Uniform cooling is required to improve the quality of the product, and rapid cooling is required to improve the productivity. In this paper, the cooling condition is largely classified into the case of no forced cooling by the fan and forced cooling by the fan. In addition, when forced cooling by the fan is not performed, the condition for stopping the molding machine horizontally and the condition for stopping the molding machine vertically were classified. To confirm the forced cooling by the fan, the conditions were set such that only the molding machine rotates while the fan is not running and the upper and lower fans operate when only the lower fan is operated. The surface temperature of the rotary molding machine was analyzed by the STAR-CCM+ program for the case of air-cooling. The temperature distribution of the rotary molding machine was analyzed for five conditions and the temperature distribution for cooling was compared under each condition. Among the five cases, Case 4 was lowest at approximately 35 ℃ after 900sec.

• Journal of KIISE:Software and Applications
• /
• v.36 no.1
• /
• pp.70-81
• /
• 2009

Ontology is an explicit specification of concepts and relationships between concepts in an interest domain. As considered as one of typical knowledge representation methods, ontology is applied to various studies such as information extraction, information integration, information sharing, or knowledge management. In IT based industries, ontology is applied to research on information integration and sharing in order to enhance interoperability between enterprises. In supply chains or logistics, several enterprises participate as business partners to plan movements of goods, and control goods and logistics flows. A number of researches on information integration and sharing for the effective and efficient management of logistics or supply chains have been addressed. In this paper, we address an ontology as a knowledge-base for semantic-based integration of logistics information distributed in the logistics flow. Especially, we focus on developing an ontology that enables to represent and translate semantic meaning of EPC data in the EPC Network applied logistics. We present a scenario for tracing products in logistics in order to show the value of our ontology.

• Journal of Distribution Science
• /
• v.13 no.7
• /
• pp.41-51
• /
• 2015

Purpose - This study analyzes loading efficiency by loading pattern for package standardization and reduction of logistics costs, along with the creation of revenue for the revenue review panel (RRP) of Membership Wholesale Clubs (MWC). The study aims to identify standard dimensions that can help improve the compatibility of the pallets related to display patterns preferred by the MWC and thereby explore ways to enhance logistics efficiency between manufacturers and retailers through standardization. Research design, data, and methodology - The study investigates and analyzes the current status based on actual case examples, i.e., manufacturer A and Korea's MWC (A company, B company, and C company), and thus devises improvement measures. To achieve this, the case of manufacturer A delivering to MWC was examined, and the actual pallet display patterns for each MWC were investigated by visiting each distribution site. In this study, TOPS (Total Optimization Packaging Software, USA) was used as the tool for pallet loading efficiency simulations the maximum allowable dimension was set to 0.0mm to prevent the pallet from falling outside the parameters, and the loading efficiency was analyzed with the pallet area. In other words, the study focused on dimensions (length x width x height) according to the research purpose and thereby deduced results. Results - The analysis of pallet loading patterns showed that the most preferred loading patterns for loading efficiency according to product specification, such as pinwheel, brick, and block patterns, were used in the case of the general distribution products, but the products were configured with block patterns in most cases when delivered to MWCs. The loading efficiency by loading pattern was analyzed with respect to 104 nationally listed standard dimensions. Meanwhile, No.51 (330 × 220mm) of KS T 1002 (1,100 × 1,100mm) was found to be the dimension that could bring about an improved loading efficiency, over 90.0% simultaneously in both the T-11 and T-12 pallet systems in a loading pattern configuration with the block pattern only, and the loading efficiency simulation results also confirmed this as the standard dimension that can be commonly applied to both the T-11 pallet (90.0%) and the T-12 pallet (90.7%) systems. Conclusions - The loading efficiency simulation results by loading pattern were analyzed: For the T-11 pallet system, 17 standard dimension sizes displayed the loading efficiency of 90.0% or more as block patterns, and the loading capacity was an average of 99.0%. For the T-12 pallet system, 35 standard dimension sizes displayed the loading efficiency of more than 90% as block patterns (the average loading efficiency of 98.6%). Accordingly, this study proposes that the standard dimensions of 17 sizes with the average loading efficiency of 99.0% should be applied in the use of the T-11 pallet system, and those of 35 sizes with the average loading efficiency of 98.6% should be reviewed and applied in the use of the T-12 pallet system.

• Journal of Sasang Constitutional Medicine
• /
• v.19 no.2
• /
• pp.22-29
• /
• 2007

1. Objectives Sasang Contitutional Medicine, a part of the traditional Korean medical lore, treats illness through a constitutional typing system that categorizespeople into four constitutional types. A few of the important criteria for differentiating the constitutional types are external appearances, inner state of mind, and pathological patterns. We had been developing a 3D Automatic Face Recognition Apparatus (3D-AFRA) in order to evaluate the external appearances with more objectivity. This apparatus provides a 3D image and numerical data on facial configuration, and this study aims to evaluate the mechanical accuracy of the 3D-AFRA hardware. 2. Methods Several objects of different shapes (cube, cylinder, cone, pyramid) were each scanned 10 times using the 3D Automatic Face Recognition Apparatus (3D-AFRA). The results were then compared and analyzed with data retrieved through a laser scanner known for its high accuracy. The error rates were analyzed for each grid point of facial contour scanned with Rapidform2006 (Rapidform2006 is a 3D scanning software that collects grid point data for contours of various products and products and product parts through 3D scanners and other 3D measuring devices; the grid point data thusly acquired is then used to reconstruct highly precise polygon and curvature models). 3. Results and Conclusions The average error rate was 0.22mm for the cube, 0.22mm for the cylinder, 0.125mm for the cone, and 0.172mm for the pyramid. The visual data comparing error rates for measurement figures retrieved with Rapidform2006 is shown in $Fig.3{\sim}Fig.6$. Blue tendency indicates smaller error rates, while red indicates greater error rates The protruding corners of the cube display red, indicating greater error rates. The cylinder shows greater error rates on the edges. The pyramid displays greater error rates on the base surface and around the vertex. The cone also shows greater error around the protruding edge.

• Geophysics and Geophysical Exploration
• /
• v.16 no.1
• /
• pp.27-35
• /
• 2013

In this study, we developed the trial product on 3D magnetic inversion tentatively named 'KMag3D'. Also, we briefly introduced its own function and graphic user interface on which especially focused through the development in the form of user manual. KMag3D is consisted of two fundamental frame for the 3D magnetic inversion. First, algebraic reconstruction technique was selected as a 3D inversion algorithm instead of least square method conventionally used in various magnetic inversion. By comparison, it was turned out that algebraic reconstruction algorithm was more effective and economic than that of least squares in aspect of both computation time and memory. Second, for the effective determination of the 3D initial and a-priori information model required in the execution of our algorithm, we proposed the practical technique based on the assemblage of 2D forward modeling and inversion results for individual user-selected 2D profiles. And in succession, initial and a-priori information model were constructed by appropriate interpolation along the strke direction. From this, we concluded that our technique is both suitable and very practical for the application of 3D magentic inversion problem.

• Journal of Biomedical Engineering Research
• /
• v.25 no.1
• /
• pp.21-26
• /
• 2004

Recently, many people want to know their state of health, such as a body fat rate, anywhere and anytime. The Personal Digital Assistance(PDA) is the portable wireless apparatus that has become widely popular. There are many application areas of the IDA to be in mobile care devices. In this study, we developed the PDA based body fat measurement system, composed of a cradle type measurement module and a WindowCE operated software module, a regression equation for predicting lean body mass (LBM). Sixty-three weight-stable subjects (53 men, 10 women) aged 20∼32yr participated in this study. A regression model, LBM ＝ (0.0005＊Height2 - 0.0160＊Impedance ＋ 0.3920＊Weight - 0.0684＊Age - 5.8141＊Sex ＋ 25.984, was found. The correlation coefficient( r) of body fat rate between developed system and HTM1000plus(BionetTM) was 0.928. HTM1000plus is a commercially available and approved by KFDA. These results indicated that developed system is reliable for estimation of body fat rate. Although developed system is the PDA based miniaturized, it shows good performance comparing with other commercial product.

• Journal of the Korea Society for Simulation
• /
• v.29 no.2
• /
• pp.11-20
• /
• 2020

As the manufacturing environment becomes more complex, traditional simulation models alone are having a lot of difficulties in reflecting real-time manufacturing situations. Although the Digital Twin concept is actively discussed as an alternative to overcome theses issues, many studies are being carried out only in the product design phase. This research presents a Digital Twin-based manufacturing environment framework for applying the Digital Twin concept to the manufacturing process. Twin model that is operated in virtual space, physical system and databases describing the actual manufacturing environment, are proposed as detailed components that make up the framework. To check the applicability of proposed framework, a simple Digital Twin-based manufacturing system was simulated in a conveyor system using Arena software and Excel VBA. Experiment results have shown that the twin model is transmitted real time data from the physical system via DB and were operating in the same time unit. The Excel VBA fitted parameters defined by cycle time based on historical data that real-time and training data are being accumulated together. This study proposes operating method of digital twin model through the simple experiment examples. The results lead to the applicability of Digital twin model.