• The Journal of Information Systems
• /
• v.18 no.2
• /
• pp.83-109
• /
• 2009

Such factors as the increase of population and me development of information technology were raised the needs of citizens in Korea. To meet these needs for the better services, Korean government has built up the computer networks that connect forty-two administrative operations of the central government since 1984. Through the computerization of administrative services, Korean government has been pursuing the balanced development among the regions in the country. To this end, regional informationization has been implemented since the mid 1980s. Specifically, rural villages has become information network villages (invils) by adopting computers and networks. Consequently, three hundred thirty-seven invils were implemented in the country. By selecting forty-six invils in Kyeongbuk province in Korea, this research was intended to find efficient and effective ways of operating invils. To find the problems and opportunities of the invils, the researcher has visited each of the forty-six invils between January 12th. and February 12th. in 2009. Two-round surveys were distributed to the managers of these forty-six invils. This research identified ten problems as below. a. Problems after the implementation of invils b. Problems occurred at the same rime as the operation of invils c. Problems with regard to the invil managers d. Problems with regard to the criteria of success or failure e. Problems with regard to the cooperation of administrative offices f. Problems with regard to the boosting of invil experience g. Problems with regard to software assurance developed in invils h. Problems with regard to incentives to invlis i. Problems with regard to the role of invils To solve these problems in hands of invils, this research suggested policy ideas in two levels: 1. invils 2. government Policies should be implemented by invils: a. The strengthening of training rural people for the better utilization of computers b. The strengthening of the regulations on membership management and electronic commerce c. The establishment of the invil managers' job tenure d. The reformation of measuring the success or failure of an invil e. The integration of administrative offices centralized by invils f. The establishment of trust between administrative offices and invils g. the integration of experience villages and invil managing offices h. The revitalization of incentives to invils and experience villages i. The enforcement of cooperative offices among invils Policies to be implemented by the government: a. The revitalization of electronic commerce through invils b. The rationalization of selecting invils in an area c. The unification of various offices for rural informationization d. The construction of portal sites for rural areas e. The continuous training of IT leaders in rural areas f. The provision of pays to invil managers based on break-even points g. The transcendentalization toward the second new town movement

• Journal of the Korea Convergence Society
• /
• v.8 no.4
• /
• pp.131-137
• /
• 2017

In the present study, we developed the 4D CT data generation program from CAD-based models. To evaluate the developed program, a CAD-based respiratory motion phantom was designed using CAD software, and converted into 4D CT dataset, which include 10 phases of 3D CTs. The generated 4D CT dataset was evaluated its effectiveness and accuracy through the implementation in radiation therapy planning system (RTPS). Consequently, the results show that the generated 4D CT dataset can be successfully implemented in RTPS, and targets in all phases of 4D CT dataset were moved well according to the user parameters (10 mm) with its stationarily volume (8.8 cc). The developed program, unlike real 4D CT scanner, due to the its ability to make a gold-standard dataset without any artifacts constructed by modality's movements, we believe that this program will be used when the motion effect is important, such as 4D radiation treatment planning and 4D radiation imaging.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.495-500
• /
• 2006

Satellite systems for objects positioning appeared indispensable for performing basic tasks of maritime navigation. Navigation, understood as safe and effective conducting a vehicle from one point to another, within a specific physical-geographical environment. [Kopacz, $Urba{\acute{n}}ski$, 1998]. However, the systems have not solved the problem of accessibility to reliable and highly accurate information about a position of an object, especially if surveyed toward on-shore navigational signs or in sea depth. And it's of considerable significance for many navigational tasks, carried out within the frameworks of special works performance and submarine navigation. In addition, positioning precisely the objects other than vessels, while executing hydrographical works, is not always possible with a use of any satellite system. Difficulties with GPS application show up also while positioning such off-lying dangers as wrecks, underwater and aquatic rocks also other naturaland artificial obstacles. It is caused by impossibility of surveyors approaching directly any such object while its positioning. Moreover, determination of vessels positions mutually (mutual geometrical relations) by teams carrying out one common tasks at sea, demands applying the navigational techniques other than the satellite ones. Vessels'staying precisely on specified positions is of special importance in, among the others, the cases as follows: - surveying vessels while carrying out bathymetric works, wire dragging; - special tasks watercraft in course of carrying out scientific research, sea bottom exploration etc. The problems are essential for maritime economy and the Country defence readiness. Resolving them requires applying not only the satellite navigation methods, but also the terrestrial ones. The condition for implementation of the geo-navigation methods is at present the methods development both: in aspects of their techniques and technologies as well as survey data evaluation. Now, the classical geo-navigation comprises procedures, which meet out-of-date accuracy standards. To enable meeting the present-day requirements, the methods should refer to well-recognised and still developed methods of contemporary geodesy. Moreover, in a time of computerization and automation of calculating, it is feasible to create also such software, which could be applied in the integrated navigational systems, allowing carrying out navigation, provided with combinatory systems as well as with the new positioning methods. Whereas, as regards data evaluation, there should be applied the most advanced achievements in that subject; first of all the newest, although theoretically well-recognised estimation methods, including estimation [Hampel et al. 1986; $Wi{\acute{s}}niewski$ 2005; Yang 1997; Yang et al. 1999]. Such approach to the problem consisting in positioning a vehicle in motion and solid objects under observation enables an opportunity of creating dynamic and interactive navigational structures. The main subject of the theoretical suggested in this paper is the Interactive Navigational Structure. In this paper, the Structure will stand for the existing navigational signs systems, any observed solid objects and also vehicles, carrying out navigation (submarines inclusive), which, owing to mutual dependencies, (geometrical and physical) allow to determine coordinates of this new Structure's elements and to correct the already known coordinates of other elements.

• Journal of Navigation and Port Research
• /
• v.38 no.5
• /
• pp.549-559
• /
• 2014

The increasing demand of maritime transportation and port development especially due to increased international trade resulted in a strengthening of regulating the greenhouse gas emissions mainly from ships by International Maritime Organization (IMO). Responding to these international environmental regulation and enforcement, the United States and the European seaports have expanded their Green Port Policy, which can promote the public welfare by reducing pollution caused by ships and ports. Accordingly, in 2010, Korean government enacted "The Framework Act on Low Carbon, Green Growth" and had pushed for all Korean ports to establish and implement their own green port policies. Therefore, the objective of this study is to establish the Green Port Policy Plan for sustainable and environmental friendly operations and developments of Ulsan port, which plans to be the oil hub port of Northeast Asia. To this end, we studied the current status of the environmental policy issues in Ulsan Port and international-&-domestic case studies on establishment of green port policy. With these studies, Ulsan green policy alternatives were identified that through the experts advice, and then were prioritized by adopting AHP survey analysis. As the result of this study, it was notified that LED lights replacement and AMP establishment as the hardware policy and the port environmental management department as the software policy were equally important policy options for the implementation of sustainable Ulsan Green Port Policy to meet port's characteristics.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.2
• /
• pp.379-385
• /
• 2017

In general, distribution board, panel board and motor control center can be installed over a wide area such as residence of group, building, schools, factories, ports, airports, water service and sewerage, substation and heavy industries that are used to supply converts the voltages extra high voltage into optimal voltage. There are electrical accidents due to rise of contact temperature, loose contact between busbar, deterioration of the contact resistance, over temperature of the busbars. In this paper, we designed and implemented the busbar joint and temperature measurement system, which can measure the joint resistance of busbar and loose connection between busbar using potentiometer and non-contact infrared sensor. The experimental results show that tightening the bolt and nut is fully engaged, resistance was decreased and maximum error range was 0.1mm. Also, the experimental result showed that the temperature at the contact area is increased from $27.3^{\circ}C$ to $69.3^{\circ}C$by the contact resistance.

• Journal of KIISE:Computing Practices and Letters
• /
• v.8 no.4
• /
• pp.457-467
• /
• 2002

In order to simulate cyber attacks and predict network behavior by attacks, we should represent attributes of network components in the simulation model, and should express characteristics of systems that carry out various cyber attacks and defend from these attacks. To simulate how network load may change under the cyber attacks, we extended SSF[9, 10] that is process-based event-oriented simulation system. We added a firewall class and a packet manipulator into the SSFNet that is a component of SSF. The firewall class, which is related to the security, is to simulate cyber attacks, and the packet manipulator is a set of functions to write attack programs for the simulation. The extended SSFNet enables to simulate a network with the security systems and provides advantages that make easy to port already exsiting attack programs and apply them to the simulation evironment. We made a vitual network model to verify operations of the added classes, and simulated a smurf attack that is a representative denial of sevive attack, and observed the network behavior under the smurf attack. The results showed that the firewall class and packet manipulator developed in this paper worked normaly.

• The KIPS Transactions:PartA
• /
• v.19A no.1
• /
• pp.1-8
• /
• 2012

Network-based intelligent robot is connected with network system, provides interactions with humans, and carries out its own roles on ubiquitous computing environments. URC (Ubiquitous Robot Companion) robot has been proposed to develop network-based robot by applying distributed computing techniques. On URC robot, it is possible to save the computing power of robot client by environments, has been proposed to develop robot software using service-oriented architecture on server-client computing environments. The SOMAR client robot consists of two layers - device service layer and robot service layer. The device service controls physical devices, and the robot service abstracts robot's services, which are newly defined and generated by combining many device services. RSEL (Robot Service Executing Language) is defined in this paper to represent relations and connections between device services and robot services. A RESL document, including robot services by combining several device services, is translated to a programming language for robot client system using RSEL translator, then the translated source program is compiled and uploaded to robot client system with RPC (Remote Procedure Call) command. A SOMAR client system is easy to be applied to embedded systems of host/target architecture. Moreover it is possible to produce a light-weight URC client robot by reducing workload of RSEL processing engine.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.2B
• /
• pp.1-10
• /
• 2005

TCP/IP protocols have been implemented in software program running on CPU in end systems. As the increased demand of fast protocol processing, it is required to implement the protocols in hardware, and Host Interface is responsible for communication between external CPU and the hardware blocks of TCP/IP implementation. The Host Interface follows AMBA AHB specification for the communication with external world. For control flow, the Host Interface behaves as a slave of AMBA AHB. Using internal Command/status Registers, the Host Interface receives commands from CPU and transfers hardware status and header information to CPU. On the other hand, the Host Interface behaves as a master for data flow. Data flow has two directions, Receive Flow and Transmit Flow. In Receive Flow, using internal RxFIFO, the Host Interface reads data from UDP FIFO or TCP buffer and transfers data to external RAM for CPU to read. For Transmit Flow, the Host Interface reads data from external RAM and transfers data to UDP buffer or TCP buffer through internal TxFIFO. TCP/IP hardware blocks generate packets using the data and transmit. Buffer Descriptor is one of the Command/Status Registers, and the information stored in Buffer Descriptor is used for external RAM access. Several testcases are designed to verify TCP/IP functions. The Host Interface is synthesized using the 0.18 micron technology, and it results in 173 K gates including the Command/status Registers and internal FIFOs.

• Quality Improvement in Health Care
• /
• v.5 no.1
• /
• pp.42-57
• /
• 1998

Background : It is increasing the concern for patient satisfaction as a customer information. This study was planned to investigate the activities related to patient satisfaction survey at the Korean hospitals. Methods : We performed the nationwide survey on 235 general hospitals by using the self-administrated checklist from Sep. 9 to Oct. 9, 1996. The response rate were 50.2%. We analyzed the descriptive statistics and chi-square test by SAS software on 118 hospitals. Results : First of all, 62.7% of study hospitals showed to conduct the patient satisfaction survey, and most of hospitals which did not conduct it had a plan to do it within 5 years. The reason that hospitals did not conduct satisfaction survey was due to a lack of administrator's interest or adequate questionnaire form. Second, the bigger, public and being more located in the big city or opened more than 10 years, the more hospitals conducted the patient satisfaction survey. Also, patient satisfaction survey was mainly handled by planning dept. or administrative team. Third, most hospitals had their own way of making questionnaires without proving reliability and validity. The results of the survey were applied to hospital management timely, and were mostly reported to top manager level. Most CEO concerned about the results of satisfaction survey. Fourth, the staffs in charge of survey had problems such as skill related to data analysis and development of questionnaire and they suggested that this problems could be solved through inducing the implementation of the survey results on hospital management, support for the development of standardized questionnaires and increasing the top manager's interests. Fifth, most questionnaires composed of lots of questioning items on hospital equipments and environment, and kindness of hospital employee to patients. Conclusions : Although this study had some limitations in generalization due to low response rate in big hospitals, it is meaningful to find the present state and the problems related to patient satisfaction survey of the general hospitals. We can conclude that there are increasing the concern for patient satisfaction survey among the hospitals nationwide, and it can be needed for technical support related to development of survey tool or method.

• Journal of KIISE:Software and Applications
• /
• v.31 no.2
• /
• pp.137-152
• /
• 2004

Assesment of 30 nutritional minerals and 8 toxic elements in hair are very important not only for determining adequacy, deficiencies and unbalance, but also for assessing their relative relationships in the body. A test has been developed that serves this purpose exceedingly well. This test is known as tissue mineral analysis(TMA). TMA is very popular method in hair mineral analysis for health care professionals in over 46 countries' medical center. However, there are some problems. First, they do not have database which is suitable for korean to do analyze. Second, as the TMA results from TEI-USA is composed of english documents and graphic files prohibited to open, its usability is very low. Third, some of them has low level database which is related to TMA, so hairs are sent to TEI-USA for analyzing and medical services. it bring about an severe outflow of dollars. Finally, TMA results are based on the database of american health and mineral standards, it is possibly mislead korean mineral standards. The purposes of this research is to develope the first Intelligent Medical Expert System(IMES) of TMA, in Korea, which makes clear the problems mentioned earlier IMES can analyze the tissue mineral data with multiple stage decision tree classifier. It is also constructed with multiple fuzzy rule base and hence analyze the complex data from Korean database by fuzzy inference methods. Pilot test of this systems are increased of business efficiency and business satisfaction 86% and 92% respectively.