• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2001.11a
• /
• pp.169-171
• /
• 2001

본 논문에서는 유한요소법에 기초한 상용프로그램을 이용하여 도파관 필터를 시뮬레이션을 할 경우 도체에 의한 손실을 포함시키는 방법을 제시하였다. 우선 균일한 도파관의 도체에 의한 감쇠의 시뮬레이션 결과를 이론치와 비교하였다. 다음으로 도파관 대역통과 필터의 통과대역 감쇠의 측정결과와 시뮬레이션의 결과를 비교하여 시뮬레이션의 정확도를 검증하였다.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.25 no.12
• /
• pp.843-855
• /
• 2015

This study developed a band-pass filter based artificial filter bank(BAFB) based on that in order to efficiently obtain the significant dynamic responses. The BAFB was then optimized about the El-centro earthquake wave which was often used in the construction research, and the software implementation of BAFB was finally embedded in the wireless unified management system(WiUMS). For the evaluation of the developed BAFB, a real time dynamic response experiment was performed on a cable-stayed bridge model, and the response of the cable-stayed bridge model was measured using both the traditional wired system and the developed BAFB-based WiUMS. The experiment results showed that the compressed dynamic response acquired by the BAFB-based WiUMS matched significantly with that of the traditional wired system while still carrying sufficient modal information of the cable-stayed bridge. Finally, the developed BAFB was able to reconstruct or re-sample the dynamic response wholly from the compressed response signal, and it can be applied as a new kind of measurement system for a wireless sensor networks based structural health monitoring system that secures both economy and efficiency.

• Journal of Power Electronics
• /
• v.14 no.6
• /
• pp.1303-1313
• /
• 2014

Dynamic behavior of the harmonic detection part of an active power filter (APF) has an essential role in filter compensation performances during transient conditions. Instantaneous power (p-q) theory is extensively used to design harmonic detectors for active filters. Large overshoot of p-q theory method deteriorates filter response at a large and rapid load change. In this study the harmonic estimation of an APF during transient conditions for balanced three-phase nonlinear loads is conducted. A novel fuzzy instantaneous power (FIP) theory is proposed to improve conventional p-q theory dynamic performances during transient conditions to adapt automatically to any random and rapid nonlinear load change. Adding fuzzy rules in p-q theory improves the decomposition of the alternating current components of active and reactive power signals and develops correct reference during rapid and random current variation. Modifying p-q theory internal high-pass filter performance using fuzzy rules without any drawback is a prospect. In the simulated system using MATLAB/SIMULINK, the shunt active filter is connected to a rapidly time-varying nonlinear load. The harmonic detection parts of the shunt active filter are developed for FIP theory-based and p-q theory-based algorithms. The harmonic detector hardware is also developed using the TMS320F28335 digital signal processor and connected to a laboratory nonlinear load. The software is developed for FIP theory-based and p-q theory-based algorithms. The simulation and experimental tests results verify the ability of the new technique in harmonic detection of rapid changing nonlinear loads.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.3
• /
• pp.2-17
• /
• 1999

Interpolated second order polynomials(ISOP's) are proposed to design efficient cascaded integrator-comb(CIC)-based decimation filters for a programmable downconverter. It is shown that some simple ISOP's can effectively reduce the passband droop caused by CIC filtering with little degradation in aliasing attenuation. In addition, ISOP's are shown to be useful for simplifying halfband filters that usually follow CIC filtering. As a result, a modified half band filter(MHBF) is introduced which is simpler than conventional halfband filters. The proposed decimation filter for a programmable downconverter is a cascade of a CIC filter, an ISOP, MHBF's and a programmable finite impulse response(FIR) filter. A procedure for designing the decimation filter is developed. In particular, an optimization technique that simultaneously designs the decimation filter is developed. In particular, an optimization technique that simultaneously designs the ISOP and programmable FIR filters is presented. Design examples demonstrate that the proposed method leads to more efficient programmable downconverters than existing ones.

• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2002.09a
• /
• pp.11-12
• /
• 2002

Accidental overexposures by radiotherapy have gathered attention recently in Japan. The widely publicized accidents have occurred at the government official benefit society hospital and at the hospital affiliated to a medical school. The accident at the government official benefit society hospital occurred when one of two existing accelerators was renewed. A radiotherapy planning system was also introduced at that time. Then treatment planning for the old and the new linear accelerator was performed using the system. There were variations in wedge factors for the 30 degrees wedge filter between the old and the new linear accelerator. That is, the difference in the structure of the wedge filter (30 degrees) resulted in variations of the wedge factors between both accelerators. In order to keep strength, a lead board was backed to the lead wedge filter for the new linear accelerator, whereas the wedge filter for the old one was made of the iron. The X-ray attenuation of the iron wedge filter is smaller than that of the lead wedge filter. The basic beam data of the old linear accelerator, however, wasn't delivered properly between the user and the maker. Then, the accident took place because the same wedge factor was used for the old and the new linear accelerator. On the other hand, the accident which occurred at the university hospital was brought about by the input mistake in initialization of the computer system when a linear accelerator was introduced. The input mistake was found when the software of the system was updated. If the dose had been measured and confirmed adequately, the accidents could have been prevented in both cases.

• Journal of Advanced Navigation Technology
• /
• v.24 no.1
• /
• pp.53-60
• /
• 2020

In this paper, We have studied the structure of a Telemetry Transmitter capable of transmitting variable data rates. This paper proposed a structure combining variable pre-modulation filter with cutoff characteristic with variable input sample rate converter. Variable pre-modulation filter has the same characteristics as pre-modulation filter and is converted to a constant sampling rate without structural changes according to the variable input data rate. We propose a software program that actively controls variable pre-modulation filter and variable input sample rate converter to respond to real-time changing data.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.12
• /
• pp.1624-1630
• /
• 2019

With the increase in there are smart devices penetration around the world, services related to exercise checks are attracting attention. However, there is existing exercise amount measurement service does not use the altitude information, or because the use of an algorithm that does not corrected the GPS altitude error is not accurate movement distance provided have a problem. Therefore, in this paper, to improve the existing problems, Kalman-filter-based user movement distance measurement algorithm is designed and implementation of improved by using the Kalman-filter based GPS and barometric altimeter sensor fusion algorithm to improve the altitude value the accuracy and of calculate the coordinate plane distance. As a result of comparing the designed and implementation of algorithm with the existing algorithms, it is confirmed that the proposed algorithm improves the accuracy by about 2.17%.

• Journal of Information Processing Systems
• /
• v.14 no.2
• /
• pp.499-509
• /
• 2018

Recently, hybrid transactional memory (HyTM) has gained much interest from researchers because it combines the advantages of hardware transactional memory (HTM) and software transactional memory (STM). To provide the concurrency control of transactions, the existing HyTM-based studies use a bloom filter. However, they fail to overcome the typical false positive errors of a bloom filter. Though the existing studies use a global lock, the efficiency of global lock-based memory allocation is significantly low in multi-core environment. In this paper, we propose an efficient hybrid transactional memory scheme using near-optimal retry computation and sophisticated memory management in order to efficiently process transactions in multi-core environment. First, we propose a near-optimal retry computation algorithm that provides an efficient HTM configuration using machine learning algorithms, according to the characteristic of a given workload. Second, we provide an efficient concurrency control for transactions in different environments by using a sophisticated bloom filter. Third, we propose a memory management scheme being optimized for the CPU cache line, in order to provide a fast transaction processing. Finally, it is shown from our performance evaluation that our HyTM scheme achieves up to 2.5 times better performance by using the Stanford transactional applications for multi-processing (STAMP) benchmarks than the state-of-the-art algorithms.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.4
• /
• pp.589-594
• /
• 2002

The filter of hairpin type can be designed small but has a demerit which a design method is complex. This paper suggests the method that a hairpin line filter is designed with applying a transmission line method and J inverter circuit, accurately calculated the J value and the b parameter. It is considered about the line have no the mutual coupling element with next line to each other. is calculated a length of electric coupling line about coupling element in each inverter stage from the J value and the b parameter. In order to show the validity of the proposed design method, band pass filter of small hairpin line is designed at center frequency 2.6 GHz, with Serenade 8.0 software tool and the simulation characteristics are compared with design results.

• The Bulletin of The Korean Astronomical Society
• /
• v.42 no.2
• /
• pp.66.3-66.3
• /
• 2017

Korea Astronomy and Space Science Institute (KASI) is developing a coronagraph in collaboration with National Aeronautics and Space Administration (NASA) which will be installed on the International Space Station (ISS). The coronagraph can measure speed and temperature by using four filters approximately 400 nm and polarization filter in three different angles, differently with older coronagraphs. For the successful mission, it has development and experiment progress in three phases; total solar eclipse experiment in 2017, balloon experiment in 2019, and the ISS installation in 2021. As a first experiment, we developed a coronagraph without an occulter named with Diagnostic Coronagraph Experiment (DICE) for experiment for filter system and imaging sensor. We designed optics with a field of view from 2.5 to 15 solar radii. It has four filters approximately 400 nm and polarizer to measure speed and velocity of the solar corona. For the selection of filter or polarization angle, it has two mechanism parts; filter wheel assembly and a polarizer wheel assembly. Especially we used Core Flight System (CFS) platform which was developed by NASA, when we develop the coronagraph operation software. It provides us stability, reusability, and compatibility.