• International Journal of Computer Science & Network Security
• /
• v.23 no.2
• /
• pp.126-132
• /
• 2023

Web technology is evolving with the passage of time, from a single node server to high availability and then in the form of Kubernetes. In recent years, the research community have been trying to provide high availability in the form of multi master cluster with a solid election algorithm. This is helpful in increasing the resources in the form of pods inside the worker node. There are new impact of known DDoS attack, which is utilizing the resources at its peak, known as Yoyo attack. It is kind of burst attack that can utilize CPU and memory to its limit and provide legit visitors with a bad experience. In this research, we tried to mitigate the Yoyo attack by introducing a firewall at load-balancer level to prevent the attack from going to the cluster network.

• Journal of Power Electronics
• /
• v.18 no.2
• /
• pp.432-444
• /
• 2018

This paper presents a capacitor voltage balancing topology using a three-level boost converter (TLBC) for a neutral point clamped (NPC) three-level inverter fed surface permanent magnet synchronous motor drive (SPMSM). It enhanced the performance of the drive in terms of its voltage THD and torque pulsation. The main attracting feature of the proposed control is the boosting of the input voltage and at the same time the balancing of the capacitor voltages. This control also reduces the computational complexity. For the purpose of close loop vector control, a software based cost effective resolver to digital converter RDC-less estimation is implemented to calculate the speed and position. The proposed drive is simulated in the MATLAB/SIMULINK environment and an experimental investigation using dSPACE DS1104 validates the proposed drive system at different operating condition.

• ETRI Journal
• /
• v.32 no.6
• /
• pp.940-949
• /
• 2010

Rack-level DC power supply is the optimal technology for providing DC power to a volume server without any power infrastructure changes in an existing AC data center. In this paper, we propose a smartly controllable and monitorable DC rack power system. The proposed system improves power efficiency by changing the power distribution architecture of a conventional method in the rack. We developed an optimal power control method in multipower modules to provide high efficiency at low loads. In addition, the proposed system provides real-time web monitoring of the rack power and environment around a rack. In our experiments, the proposed system improved the power efficiency by over 10% compared to an AC power system providing N+1 redundant power and power monitoring.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.04a
• /
• pp.505-509
• /
• 2008

This paper studied the efficient noise prediction method for new apartment house near the road traffic noise. Three noise prediction software were compared by each prediction noise level using the simple model which is included the road, soundproofing wall and building. Two foreign national calculation models(RLS-90 and NMPB) were verified by comparison of measured sound level. Frequency of sound level was predicted by NMPB and compared by measured data. The sphere of noise source and facade reflection were proposed to accurate predict the road traffic noise in new apartment house.

• Journal of Aerospace System Engineering
• /
• v.7 no.2
• /
• pp.29-34
• /
• 2013

Safety requirements for aircraft and system functions include minimum performance constraints for both availability and integrity of the function. These safety requirements should be determined by conducting a safety assessment. The depths and contents of aircraft system safety assessment vary depending on factors such as the complexity of the system, how critical the system is to flight safety, what volume of experience is available on the type of system and the novelty and complexity of the technologies being used. Requirements that are defined to prevent failure conditions or to provide safety related functions should be uniquely identified and traceable through the levels of development. This will ensure visibility of the safety requirements at the software and electronic hardware design level. This paper has prepared to study on promoting the efficiency of establishing hierarchical safety requirements from aircraft level function to item level through system safety processes.

• Journal of Aerospace System Engineering
• /
• v.3 no.2
• /
• pp.31-38
• /
• 2009

COMS On-board FDIR(Failure Detection, Isolation and Recovery) functions are implemented on the on-board software to satisfy the autonomy and failure tolerance requirements. This paper presents concepts of COMS Failure Management with hierarchical layers and addresses the characteristics of the FDIR layer from low level to high level. It is aimed at giving the reader the understanding how the COMS FDIR was designed and how works. It first recalls what are the system level applicable requirements, which are based on the COMS mission requirements. Then it describes the philosophy and structure of the FDIR and subsequently breaks it down into the several FDIR layers. It could be used as an important and useful reference of the information to design and develop an automatic FDIR mechanism in the future.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.790-795
• /
• 2004

The characteristics of refrigerator noise recorded in anechoic chamber was investigated in condition of a the real living room and a kitchen. To predict the noise propagation in an apartment unit, room acoustic simulation software was used. It was found that the noise level in the real living room was $4\sim8dB$ higher than in the anechoic chamber. When a noise barrier and absorption materials were used on the rear wall and floor, the noise level reduced up to $3\sim4dB$. In addition, when the subjective evaluation of auralized refrigerator noise was undertaken using headphone, it was revealed that 21dB (A) is the allowable sound pressure level of 95% satisfaction.

• Geomechanics and Engineering
• /
• v.32 no.4
• /
• pp.387-396
• /
• 2023

Ground subsidence, which is a current concern that affects piled raft foundations, has occurred at a high rate in Ho Chi Minh City, Viet Nam, due primarily to groundwater pumping for water supply. In this study, the groundwater level (GWL) change affect on a piled raft foundation was investigated based on the three-dimensional finite element method (3D-FEM) using the PLAXIS 3D software. The GWL change due to global groundwater pumping and dewatering were simulated in PLAXIS 3D based on the GWL reduction and consolidation. Settlement and the pile axial force of the piled raft foundation in Ho Chi Minh subsoil were investigated based on the actual design and the proposed optimal case. The actual design used the piled foundation concept, while the optimal case applied a pile spacing of 6D using a piled raft concept to reduce the number of piles, with little increased settlement. The results indicated that the settlement increased with the GWL reduction, caused by groundwater pumping and dewatering. The subsidence started to affect the piled raft foundation 2.5 years after construction for the actual design and after 3.4 years for the optimal case due to global groundwater pumping. The pile's axial force, which was affected by negative skin friction, increased during that time.

• Journal of Soil and Groundwater Environment
• /
• v.16 no.1
• /
• pp.32-41
• /
• 2011

By using a newly developed Korean risk-based corrective action (K-RBCA) software (K-RBCA) and the RBCA Tool Kit, risk assessment was performed on a site that was contaminated with aromatic hydrocarbons and heavy metals. Eight chemicals including benzene, ethylbenzene, xylenes, naphthalene, benz(a) anthracene, benzo(b) fluoranthene, benzo(a) pyrene, and arsenic that exceeded the US EPA Soil Screening Level were chosen as the target pollutants. A conceptual site model was constructed based on the site-specific effective exposure pathways. According to the RBCA Tool Kit the carcinogenic risk of arsenic was larger than $10^{-6}$, which is the generally acceptable carcinogenic risk level. The K-RBCA estimated the same level of carcinogenic risk for arsenic. With the RBCA Tool Kit, the carcinogenic risk of benzo(a) pyrene was estimated to be about $1.3{\times}10^{-6}$. However, with the K-RBCA benzo(a) pyrene did not exhibit any risk. The inconsistency between the softwares was attributed to the different fundamental settings (i.e., medium division) between the two softwares. While the K-RBCA divides medium into surface soil, subsurface soil, and groundwater, the RBCA Tool Kit divides medium into only soil and groundwater. These differences lead to the different exposure pathways used by the two softwares. The K-RBCA considers the exposure pathways in surface soil and subsurface soil separately to estimate risk, however, the RBCA Tool Kit considers the surface soil and subsurface soil as one and uses the integrated exposure pathways to estimate risk. Thus the resulting risk is higher when the RBCA Tool Kit is used than when the K-RBCA is used. The results from this study show that there is no significant difference in the risks estimated by the two softwares, thus, it is reasonable to use the K-RBCA we developed in risk assessment of soil and groundwater. In addition, the present study demonstrates that the assessor should be familiar with the characteristics of a contaminated site and the assumptions used by a risk assessment software when carrying out risk assessment.

• Journal of Software Engineering Society
• /
• v.26 no.2
• /
• pp.45-52
• /
• 2013

A cloud computing service provider must assure Service Level Agreement (SLA) to provide reliable and consistent quality of service to a user. The SLA is a contract between the user and the service provider that connects to assure constant level such as availability to target provided service. The cloud computing is classified into IaaS, PaaS, and SaaS according to IT resources of the various cloud service. The existing SLA is difficult to reflect quality factors of service because it only considers factors about the physical Network environment. In this paper, we suggest the UDDI-based interchange process with the architecture and the specification language having a XML schema for the SLA specification. The quality requirements of SaaS are defined by a proposed specification language in the cloud environment. It is stored in the repository of a quality specification and exchanged on during the service binding time based on the exchange architecture.