• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.6 s.324
• /
• pp.1-7
• /
• 2004

The development of direct receiver techniques is expected to be a solution for future wideband or multi-band wireless systems based on software defined radio. In this Paper, we study the regeneration of I and Q signals for the SDR based direct conversion receiver, so that we can handle a wide bandwidth and maintain maximal flexibility in system utilization. After modeling the basic system considering the real wireless communication environment, and studying the impact of imperfect phase imbalance on the performance of a direct conversion receiver, we propose a suboptimal I and Q signal regeneration algorithm for the system. The proposed algerian regenerates I and Q signals using a real time early-late compensator which effectively estimates phase imbalances and gives feedback in a directreceiver. The proposed algorithm is shown to mitigate the impact of AWGN and improves performance especially at low SNR channel condition. According to the computer simulation, the BER performance of the proposed system is at least about 4 dB better than conventional systems under $45{\~}55$ degrees random phase errors.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.12
• /
• pp.1339-1349
• /
• 2008

In this paper, a nonlinear relationship between an input complex envelope and an output complex envelope of m-th harmonic zone is theoretically analyzed, and AM/$AM_m$ and AM/$PM_m$ are defined. A scheme to extract these characteristics from measured in-phase and quadrature-phase data is suggested. The proposed analysis is verified with a fundamental-fundamental and fundamental-third harmonic measurements for a InGaP power amplifier(PA). Based on the harmonic-band nonlinear analysis and extraction scheme, a new technique to send a signal in m-th harmonic band with a harmonic signal Linearization Digital Predistortion(DPD) scheme is presented. A numerical analysis and a Look-Up Table(LUT) based DPD algorithms to linearize output signal on m-th harmonic zone are developed. For a 16- and a 64-QAM input signals, a DPD for third harmonic signal linearization is implemented, and output spectrum and signal constellation are measured. The wholly distorted signals are linearized, and thus the measured Error Vector Magnitudes (EVM) are 6.4 % and 6.5 % respectively. The results show that a proposed scheme linearizes a nonlinearly distorted harmonic band signals. The proposed nonlinear analysis and predistortion scheme can be applied to multiband transmitter in next generation software defined radio(SDR)/cognitive radio(CR) wireless system.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.5
• /
• pp.65-72
• /
• 2013

ETSI(European Telecommunication Standards Institute), TC(Technical Committee), RRS(Reconfigurable Radio Systems)에서는 소프트웨어 모뎀 기반 멀티모드 단말기의 연구 및 표준을 개발하고 있다. 소프트웨어 모뎀 기반 멀티모드 단말기는 SDR(Software Defined Radio) 기술을 바탕으로 단말기 플랫폼에 독립적인 라디오 어플리케이션을 운용함으로써, 하나의 단말기에서 동시에 다양한 이동통신 표준을 이용할 수 있는 차세대 단말기이다. 본 논문에서는 TC RRS에서 정의한 라디오 어플리케이션 사이에서의 리소스 공유 방법과 라디오 어플리케이션의 배포 형태에 따른 멀티모드 단말기의 분류에 대해 소개한다. 또한, 여러 개의 라디오 어플리케이션을 동시에 운영할 수 있는 멀티모드 단말기의 아키텍처와 인터페이스에 대해 소개한다.

• Information and Communications Magazine
• /
• v.25 no.3
• /
• pp.48-52
• /
• 2008

인지 무선(CR: Cognitive Radio) 시스템은 SDR(Software Defined Radio) 기술을 기반으로 주변 환경을 인지하여 가용한 주파수를 선정하고 통신하는 기본적인 기능과 여러 가지 환경 파라미터를 지속적으로 업데이트하는 학습 알고리즘이 합쳐진 기술이다. CR기술은 최근 무선 통신 서비스의 발전으로 주파수의 수요가 증가하면서 사용하지 않는 주파수 자원을 효율적으로 이용하기 위한 기술로써 각광받고 있다. CR시스템을 단말에 적용 및 구현하기 위해 선행되어야 하는 연구 분야는 크게 하드웨어 분야와 소프트웨어 분야로 나누어 생각할 수 있다. 하드웨어 분야에 관련된 연구는 다시 RF 처리부와 디지털 신호 프로세스부로 나눌 수 있다. 본 논문에서는 CR 시스템을 단말에 적용하기 위해 필요한 선행 기술들을 살펴보고, 실제 단말에 적용 했을 때의 단말 형태에 대해 알아본다.

• Journal of Positioning, Navigation, and Timing
• /
• v.5 no.1
• /
• pp.11-20
• /
• 2016

In this paper, a system that can collect GPS L1 C/A, GLONASS G1, and BDS B1I signals with single front-end receiver was implemented using a universal software radio peripheral (USRP) and its performance was verified. To acquire the global navigation satellite system signals, hardware was configured using USRP, antenna, external low-noise amplifier, and external oscillator. In addition, a value of optimum local oscillator frequency was selected to sample signals from three systems with L1-band with a low sampling rate as much as possible. The comparison result of C/N0 between the signal collection system using the proposed method and commercial receiver using double front-end showed that the proposed system had 0.7 ~ 0.8dB higher than that of commercial receiver for GPS L1 C/A signals and 1 ~ 2 dB lower than that of commercial receiver for GLONASS G1 and BDS B1I. Through the above results, it was verified that signals collected using the three systems with a single USRP had no significant error with that of commercial receiver. In the future, it is expected that the proposed system will be combined with software-defined radio (SDR) and advanced to a receiver that has a re-configuration channel.

• Journal of Advanced Navigation Technology
• /
• v.28 no.6
• /
• pp.939-945
• /
• 2024

This paper explores the implementation of a DCO-OFDM-based underwater wireless optical communication (UWOC) video transmission testbed using a software-defined radio (SDR) platform. Motivated by the increasing need for high-bandwidth underwater communication for applications like marine resource exploration and environmental monitoring, UWOC offers a promising alternative to traditional acoustic and RF-based systems, which suffer from low bandwidth and severe signal attenuation, respectively. The study utilizes DCO-OFDM modulation to overcome signal distortion and achieve efficient data transmission in underwater environments. Through experimental testing, the system demonstrated real-time transmission and playback of Full HD video at 30 FPS with minimal delay. The results underline the potential of DCO-OFDM for enabling high-bandwidth underwater communication.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.4
• /
• pp.27-35
• /
• 2008

This work proposes a 14b 150MS/s 0.13um CMOS ADC for SDR systems requiring simultaneously high resolution, low power, and small size at high speed. The proposed ADC employs a calibration-free four-step pipeline architecture optimizing the scaling factor for the input trans-conductance of amplifiers and the sampling capacitance in each stage to minimize thermal noise effects and power consumption at the target resolution and sampling rate. A signal- insensitive 3-D fully symmetric layout achieves a 14b level resolution by reducing a capacitor mismatch of three MDACs. The proposed supply- and temperature- insensitive current and voltage references with on-chip RC filters minimizing the effect of switching noise are implemented with off-chip C filters. The prototype ADC in a 0.13um 1P8M CMOS technology demonstrates a measured DNL and INL within 0.81LSB and 2.83LSB, at 14b, respectively. The ADC shows a maximum SNDR of 64dB and 61dB and a maximum SFDR of 71dB and 70dB at 120MS/s and 150MS/s, respectively. The ADC with an active die area of $2.0mm^2$ consumes 140mW at 150MS/s and 1.2V.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.5
• /
• pp.55-62
• /
• 2018

The MTD-based approach changes various operating parameters dynamically so that the vulnerability of the system can be protected from the malicious attack. In this paper, random/serial scanning/jamming attack success probabilities have been mathematically analyzed and verified through simulation to improve the security of the wireless communication systems in which the MTD-SDR technologies are applied. As a result, for random scanning attacks, attack success probability increases as the change period of transmission channel increases, while for random jamming attacks there is no change. The attack success probability patterns for serial attacks are similar to those of random attacks, but when the change period of transmission channel approaches to the total number of transmission channels, the success probability of serial attack is getting greater than that of random attack, up to twice in jamming attacks and up to 36% in scanning attacks.

• Journal of electromagnetic engineering and science
• /
• v.14 no.2
• /
• pp.47-53
• /
• 2014

This paper presents a high gain and high harmonic rejection low-noise amplifier (LNA) for software-defined radio receiver. This LNA exploits the high quality factor (Q) series resonance technique. High Q series resonance can amplify the in-band signal voltage and attenuate the out-band signals. This is achieved by a source impedance transformation. This technique does not consume power and can easily support multiband operation. The chip is fabricated in a $0.13-{\mu}m$ CMOS. It supports four bands (640, 710, 830, and 1,070MHz). The measured forward gain ($S_{21}$) is between 12.1 and 17.4 dB and the noise figure is between 2.7 and 3.3 dB. The IIP3 measures between -5.7 and -10.8 dBm, and the third harmonic rejection ratios are more than 30 dB. The LNA consumes 9.6 mW from a 1.2-V supply.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.9
• /
• pp.661-667
• /
• 2018

Tactical communication radio systems that employ software defined radios(SDRs) have been developed for achieving high-speed data transmissions and voice communications. Such systems possess multiband and multichannel features, and can potentially replace several existing radio systems. This paper proposes a design for wideband antennas by incorporating a diplexer matching network for tactical vehicles. The proposed antenna design includes two radiators(upper and lower) and a diplexer matching network connected to the end of the feed line such that the LC matching networks are interleaved in the lower radiator and spring mount. By employing the diplexer matching network, the designed antenna can perform wideband impedance matching for the fifty ohm feed line. The designed LC networks aid in varying the effective electrical length of the antenna according to the operation frequency. The primary objective behind adjusting the electrical length is to vary the current distribution above and below the LC networks. The proposed antenna was fabricated and tested in an open site. The obtained evaluation results show that the designed antenna can achieve a relative bandwidth of 190% with a VSWR value of 3.5:1, and can attain good antenna gains over VHF and UHF bands.